Тёмный

Every Retro Game Collector Needs This! The ULTIMATE All-In-One Device to BACKUP Collection! 

Подписаться
Просмотров 144 тыс.
% 5 110

Every Retro Game Collector Needs This! The All-In-One Device I've Been Waiting For!
PLEASE NOTE: When I made the video I was under the impression that Sanni initiated the Kickstarter. It has been brought to my attention that Sanni was not involved with the Kickstarter campaign but rather the Kickstarter campaign leveraged Sanni's work which is open-source. I spoke with the Kickstarter creator over discord assuming it was Sanni. Apologies for not getting this right in the video.
For those interested Sanni's Github for the cart reader can be found here: github.com/sanni/cartreader
This is the Cart Reader from the Save The Hero Project. This is capable of reading and backing up ROM and save files from your original retro cartridge based games. This works for the Nintendo Game Boy, Game Boy Color, Game Boy Advance, Super Nintendo, Nintendo 64 and the Sega Genesis. This is an open-source project that will get better with time and support more cartridge based consoles in the future!
► So here's what you will find in this video:
► 0:00 Intro
► 2:14 Overview of the Cartridge Reader
► 4:24 Quick Tutorial on How to Operate
► 8:15 Pros and Cons
► 11:10 Overall Thoughts
-----
//Sanni's Github:
► github.com/sanni/cartreader
//Follow The Save The Hero Project:
► Twitter: cartridgereader?lang=en
► Kickstarter Campaign (Ended): www.kickstarter.com/projects/save-the-hero/salvage-writes-save-data-to-your-cartridge
-----
// Support me on PATREON:
► www.patreon.com/MachoNachoProductions
// JOIN me on DISCORD!
► discord.gg/4c3fCnfdaH
-----
// SAVE MONEY at these Retro Modding Stores! (Affiliate Links Below):
► SAVE 10% by using COUPON CODE: TITO on any purchase from RETRO GAME REPAIR SHOP here: retrogamerepairshop.com/?ref=6njgx4sufvs
► SAVE 5% by using COUPON CODE: MACHONACHO on any purchase from RETRO MODDING here: bit.ly/39hHnz7
// TOOLS AND GEAR I Use For Video Game Console Modding (Soldering Equipment, Flux, Kapton Tape etc) (Affiliate Link):
►SRA Flux Pen: amzn.to/2CmPX4U
►Circuit Board Holder - amzn.to/2zV7VuC
►28 AWG gauge wire: amzn.to/2Ni1V22
►Silicone Mat for soldering: amzn.to/314rc88
►Kapton Tape: amzn.to/3xFk4wp
►iFixit Toolkit I use for all my projects: amzn.to/2CnJEOt - Everything you need!
►Hakko FR-301 Desolder Gun: amzn.to/2E8P2X3
►All other stuff I use: www.amazon.com/shop/machonachoproductions
// Great readily available IPS MOD KITS (Affiliate Links):
►Awesome Sony PSP IPS Screen Replacement: ebay.us/zlFs4h
►Neo Geo IPS Retro Pixel Kit: ebay.us/1qCM0Y
-----
// MY VIDEO and AUDIO Equipment (Amazon Affiliate Links):
-Sony A6500 Camera - amzn.to/39FSxQa
-My Absolute Favorite Lens - amzn.to/308Zm9O
-Zoom H4N Audio Recorder - amzn.to/2CR5LxF
-Aston Origin Microphone - amzn.to/3hPnap0
-----
// These stores provide fantastic Gear and Mods for Retro Consoles! If you use the following links below, I received a small percentage from sales at no cost to you. This is a great, free way to support the channel!
○ Retro Game Repair Shor (Tons of Game Boy Mods)
► retrogamerepairshop.com/?ref=6njgx4sufvs
○ Retro Modding (Lots of Handheld Console Mods)
► bit.ly/39hHnz7
○ Stone Age Gamer (Flash Carts and other great Retro Tech)
► stoneagegamer.com?afmc=MACHONACHO
○ eBay (It’s where I buy a lot of the consoles I mod!)
► ebay.us/NCwNkl
○ Sendico (I use Sendico to get great deals on Retro Consoles directly from Japan!)
► sendico.com/referral/MachoNacho
-----
// Social Media
► Instagram: machonachoproductions
► Facebook: MachoNachoProductions
► Twitter: machonachomedia
-----
// Intro Music for Retro Renew Series by Matthew McCheskey:
► matthewmccheskey.bandcamp.com/
-----
Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Macho Nacho Productions or Tito Perez. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.
Affiliate Disclosure: I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
#Nintendo #BackUpYourGames #MachoNachoProductions

Игры

Опубликовано:

 

3 фев 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 488   
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Hey Everyone! When I made the video I was under the impression that Sanni initiated the Kickstarter. It has been brought to my attention that Sanni was not involved with the Kickstarter campaign but rather the Kickstarter campaign leveraged Sanni's work which is open-source. I spoke with the Kickstarter creator over discord assuming it was Sanni. Apologies for not getting this right in the video. For those interested Sanni's Github for the cart reader can be found here: github.com/sanni/cartreader The Kickstarter (which again was not initiated by Sanini) can be found here: www.kickstarter.com/projects/save-the-hero/salvage-writes-save-data-to-your-cartridge/description
@dak1st
@dak1st 2 года назад
Please put that information into the video description at least.
@jorgemena5885
@jorgemena5885 2 года назад
Tito how can I get one of these?
@NitrosTwitch
@NitrosTwitch 2 года назад
also this version is really old, the newest version is far simpler to build
@Vek007
@Vek007 2 года назад
@@dak1st I agree. But once a video is posted, it cannot be modified. This video has been seen by many people. Please correct it in the next video.
@JB2X-Z
@JB2X-Z 2 года назад
@@Vek007 He said to at least put it in the video description, not the video itself.
@mylifeingaming
@mylifeingaming 2 года назад
[Coury] As someone who is obsessed with backing up my save files, this seems like a big upgrade from the Retrode and GB01 that I currently use. Hopefully they'll be available to buy again sometime soon.
@exonymat1471
@exonymat1471 2 года назад
Omg it's neat to see that you guys watch Tito aswell. Hope you're both doing well :)
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Hey Coury! These should be available again in the Spring. Definitely follow Sanni @CartridgeReader on Twitter for updates. Hope everything is well with you and Marc!
@androxilogin
@androxilogin 2 года назад
They've been available for years and still currently are. This guy (not Sanni) just took the open source project and cashed in on it without permission. You can build one yourself ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7k2hb82uRVc.html or buy one on Etsy. While the community is not opposed to assembling and selling these, crowdsourcing is not the route a lot have found to be in agreeance with.
@blizzzilla
@blizzzilla 2 года назад
@@MachoNachoProductions There's a bit of a misunderstanding here. Sanni, the creator of the open source project, is from Germany and not involved with the Kickstarter or that Twitter account.
@nurfuermist
@nurfuermist 2 года назад
@@MachoNachoProductions Please stop spreading fake news in your video and in the comment section! The Twitter account @CartridgeReader is NOT OWNED by sanni who is the original creator of the device!!! This Twitter guy is just a seller trying to cash in one someone elses open source product!!
@Kniffel101
@Kniffel101 2 года назад
The GB vs. GBA problem is odd since it was already solved by Nintendo themselves: A switch that is directly attached at the cartridge slot. It'd be good to have the voltage auto-detected by the type of cartridge you put in as a security feature, so you don't accidentally fry your games. But other than that this is really, really awesome!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
It would be great if it was somehow automated.
@androxilogin
@androxilogin 2 года назад
That is a cool idea, however, repros require less power. Ex. SNES games require 5v, and repros are at 3.3v. N64 requires 3.3v, however, prototype carts require 12v through the barrel plug on the Arduino Mega. The risk of frying your games is not very high. You'd have to leave the cart on there for a significant amount of time to cause any harm. Versatility is the reason.
@Kniffel101
@Kniffel101 2 года назад
@@androxilogin But are there any changes with GB/GBA repros or flash carts? Cause that was specifically meant as an "overwrite" for the Game Boy carts, not any other console.
@androxilogin
@androxilogin 2 года назад
@@Kniffel101 yes. Same deal.
@PaulTheFox1988
@PaulTheFox1988 2 года назад
I already see a problem, and that's expecting the user to always select the correct voltage and settings, it's not trivial, but can be done to check which connector is populated and automatically set the correct settings. There should be no reason why the user should have to remember to manually set everything up beforehand, as I can see some very valuable carts being killed by user error.
@MachoNachoProductions
@MachoNachoProductions 2 года назад
I’m hoping in the future this could all be automated.
@Donalbane
@Donalbane 2 года назад
So fix it.
@PaulTheFox1988
@PaulTheFox1988 2 года назад
@@Donalbane me or Tito? I didn't develop it, and neither did he. I can think of a way to do it, but I'm not quite skilled enough at circuit design or software development to do it. I would say what I think the fix could be, but you're probably not the person to discuss it with, as your terse comment suggests someone who likes to be argumentative than someone I could discuss this with in an intelligent manner. :)
@thediamonddust
@thediamonddust 2 года назад
I was going to ask what would happen if you used the wrong switch settings...
@mixmastermacaroni
@mixmastermacaroni 2 года назад
I just want to say your channel rocks! I learn so much and you got style!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you Watson 🙏! Glad you’re enjoying the channel buddy!
@retrorewired7060
@retrorewired7060 2 года назад
I’m currently half way through building one myself. It’s a TON of soldering but very rewarding. I really like the clear case you got
@MachoNachoProductions
@MachoNachoProductions 2 года назад
The clear case that Sanni made is beautiful! That sounds like a fun project. I may have to try building one too 😁
@rajgill7576
@rajgill7576 2 года назад
It looks just like this little double tube Amp I got a couple years back I love clear cases
@johnniewinwin3432
@johnniewinwin3432 Год назад
How did it turn out?
@tikoytuks1479
@tikoytuks1479 2 года назад
I’m such a massive fan of your introductions man🌿 INSTANT LIKE!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you 🙏☺️
@hadesmcc
@hadesmcc 2 года назад
This is amazing!!! I've been wanting something like this for so long! Excellent video as usual.
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you Andre! Glad you enjoyed this one!
@LusRetroSource
@LusRetroSource 2 года назад
This is such an awesome project!
@JesusRodriguezCisneros
@JesusRodriguezCisneros 2 года назад
Hey Tito, quite cool device to preserve save data from most of the popular consoles. I honestly didn’t know anything about this project, but I may have considered it if it were still active. Cheers dude!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Hey Jesus! This should be available in the spring time. I would follow them on Twitter to stay up to date if your interested in picking one up
@Madblaster6
@Madblaster6 2 года назад
Great video as always. Never disappointed
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you Madblaster 🙏☺️
@DanielOliveiraViolao
@DanielOliveiraViolao Год назад
Awesome! Great project name.
@MarshallFlores
@MarshallFlores 2 года назад
Was just looking around for GB save file dumpers when I noticed this video pop up in my subscription feed. This looks pretty promising esp. since no new updates have been made to the Retrode. Still, there's definitely room for improvement in a few areas, so will certainly be interesting see how this evolves. Thanks for the review!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
You’re welcome Marshall ☺️
@GeeKyGuyGreg
@GeeKyGuyGreg 2 года назад
I love this! Great video, Tito!🤘😎
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Me too! Glad you enjoyed the video!
@Gaming-Enthusiast
@Gaming-Enthusiast 2 года назад
This this pretty cool thanks for sharing 👌👌
@SonicBoone56
@SonicBoone56 2 года назад
This seems amazing
@Chips98
@Chips98 2 года назад
After making my own and having the adapters for MS,WS, NGP, NES, and FAMICOM I have to say I'm happy with it. Glad you did a video on it but I do agree with some where the info provided didn't seem really researched. I'd be glad to help anyone with what I know so far from this project I have the hw v3 with battery so no USB power needed.
@BowsettesFury
@BowsettesFury 2 года назад
That’s a really neat piece of tech
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Totally agree 😁
@KevinTwiner
@KevinTwiner 2 года назад
Fantastic and stylish thanks for sharing and of course caring! Stay blessed
@drift180x
@drift180x 2 года назад
What an awesome device, I really hope to get one eventually!
@CrazyGamerDude17
@CrazyGamerDude17 2 года назад
this is awesome, back last year I was wondering if it would be possible for someone to make a device that extracts ROMs from multiple different kinds of cartridges, glad it came true
@InTheMindOfficial
@InTheMindOfficial 2 года назад
Your videos are all always so professionally done and give off HUGE expert vibes
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you 🙏☺️
@seethruhead7119
@seethruhead7119 2 года назад
Your camera work on the device spinning into frame is nextlevel stuff. I hope you're working on multi million dollar commercials as your day job lol. WOW
@MachoNachoProductions
@MachoNachoProductions 2 года назад
That would be an awesome day job, unfortunately my work is much more boring than that 😅
@tylerd4884
@tylerd4884 2 года назад
cool video i have one of those i put together from the sanni project works great not sure about the kickstarted but id encourage anyone with reasonable soldering skills to make one, its not very hard
@mugogrog
@mugogrog 2 года назад
I think the biggest pro of this thing is the aesthetic of it :) it looks awesome!
@Daniel-it1dp
@Daniel-it1dp 2 года назад
Man, what a time for retro gaming. I need to get one of these and so glad you are making all of these videos despite what my wallet says 😆
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Totally agree! There has been such a boom in innovation and mods for retro gamers, it’s incredible! 👍
@davidk.4593
@davidk.4593 2 года назад
Please don't buy from Save the Hero. They have no affiliation with Sanni and/or the Open-source project, which has been available for years. Save the Hero just took the open-source stuff and sold it, without any contribution to the project itself. Though legally ok, it's basically a bootleg. Also, the quality is pretty shoddy.
@ratykat
@ratykat 2 года назад
What an incredibly useful tool! Great video as always Tito!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you!
@ScruffyLookinRGB
@ScruffyLookinRGB 2 года назад
This is really cool tito ive been looking for something like this for quite a while now. Didnt expect it to be right under my nose😉🗾 Also, This is the first time ive actually been notified of one of your videos youtube is getting their stuff together
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Awesome! That’s good to hear. This time I didn’t release the video as a premier. I wonder if that helped?
@ScruffyLookinRGB
@ScruffyLookinRGB 2 года назад
@@MachoNachoProductions it could be but i think even before you started doing premieres it wasnt getting to me then either. Who knows. I just happened to find this divice in akihabara after watching your video it was a premium price they also had a bunch of adapers for different carts too. Very cool i might have to grab one soon
@hawkfeather6802
@hawkfeather6802 2 года назад
That's a pretty cool backup device.
@retrogamepuppy1445
@retrogamepuppy1445 2 года назад
im going to look into this more
@ATthemusician
@ATthemusician 2 года назад
Something I really like about R4 carts on DS is that you can backup GBA save files
@natethebad
@natethebad 2 года назад
This such a cool product, it already consolidates the devices I have to dump Gameboy and SNES cartridges and does so much more beyond that! Thanks for another great video!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Totally agree! I love it an hope it continues to get better😁. So glad you enjoyed the video Nathan 🙏☺️
@dak1st
@dak1st 2 года назад
Don't buy from Save the Hero. He is not affiliated with the project. He just took the open source files and cashed them in on Kickstarter. Also his quality is pretty bad. There have been tons of failures.
@s7121n9s
@s7121n9s 2 года назад
This is pretty dope
@RetroSix
@RetroSix 2 года назад
Definitely buying one
@chache061978
@chache061978 2 года назад
The plug is from the Arduino Mega clone under the main board, can be supplied with a 9V power supply.
@TheCoolDave
@TheCoolDave 2 года назад
Neat.... Very cool, wish it was a little less but, might grab one... wonder, I should be do most of it on my Retron 5...Hmmm
@RamonHernandez
@RamonHernandez 2 года назад
I've been using one of these for a few years now. It is the bomb.
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Nice! I totally agree, game changing 👍
@RamonHernandez
@RamonHernandez 2 года назад
@@MachoNachoProductions If you are baller baller silver dollar with the soldering you can make some(all?) of the adapters. I have a HuCard one and some of the parts for the NES one.
@TatooPedigree
@TatooPedigree 2 года назад
I'm a little disappointed this doesn't support NES games. I'll probably just stick with my RetoBlaster. It's a little less user-friendly, less aesthetic, and still needs a PC and software to run, but it costs way less and at least I can back up my NES library.
@TheCoolDave
@TheCoolDave 2 года назад
Never knew about the RetroBlaster. No question not as elegant as this device but, it looks like it will do everything for a notable less money...
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Apparently there is an adaptor that Sanni will offer that allowed for NES and more
@belangerpm
@belangerpm 2 года назад
Check out the USB-NES. Supports NTSC, PAL, Famicom, and many more. Can also read/write battery backed saves. DIY kits and pre-built models are available on eBay.
@middle_pickup
@middle_pickup 2 года назад
That's a rad little box.
@fraise01
@fraise01 2 года назад
Very cool gadget!
@mrb3991
@mrb3991 2 года назад
Wow , You are really lucky to have that Device , their really Expensive to Buy
@Alex-qj7fw
@Alex-qj7fw 2 года назад
i havent watched the video yet, but i can tell i need this lol!
@danbaucom
@danbaucom 2 года назад
Thank you for the SINGLE notification for the upload. With RU-vid's recent updates anything that helps limit my notifications is appreciated!
@kr4t0sg.28
@kr4t0sg.28 2 года назад
The moment i saw this my first reaction was " ugh yeah cool but i don't own a computer" then you mentioned that its not required and i was like OH HELL YEAH!!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
That’s my favorite thing about it! I love that it is stand alone. Makes it so much more convenient 😁
@kr4t0sg.28
@kr4t0sg.28 2 года назад
@@MachoNachoProductions yes in deed! Thanks for another great video.
@bigemugamer
@bigemugamer 2 года назад
Awesome concept, cool design, great ease of use... This could quite possibly be the most incredible piece of retro gaming tech that I will never need.
@claudiurus7307
@claudiurus7307 10 месяцев назад
Nice video and nice device! Whish I had one device like this one 30 years ago 🙂 BTW all my repro carts bought from China, upon insertion in sega megadrive console, they oppose mechanical resistance because the PCB edge does not have a V shape cut. Yestarday I played castlevania Bloodlines from a repo cartridge and I berly inserted and remove the cartridge from de console. I got angry and sanded both edges of the pcb cartridge at a relative 45’ angle in order to obtain the V shape cut. Now it inserts and remove more easely.
@paolocapitinipoweredbyauto4774
@paolocapitinipoweredbyauto4774 2 года назад
Grazie Tito, fantastico, ciao fratello 🤜🤛👍
@KiwiKoNZ
@KiwiKoNZ 2 года назад
What an incredible concept! In regards to the price tag it could of had bigger buttons, felt more premium as you insert the cartridges and was more compatible with familiar formats like NES. Overall awesome vid as always Tito, I’m always looking forward to the next one dude 🤓👍✨
@androxilogin
@androxilogin 2 года назад
There is an adapter for NES as well as others available. The "Save the Hero" guy is not Sanni. Unfortunately this video is filled with misinformation about the project.
@belangerpm
@belangerpm 2 года назад
Check out the USB-NES. Supports NTSC, PAL, Famicom, and many more. Can also read/write battery backed saves. DIY kits and pre-built models are available on eBay.
@skins4thewin
@skins4thewin 2 года назад
See this is the type of device we need for the MISTer, to allow us to be able to play original carts. That would be awesome!! Simply allowing us to rip the ROMS off a cart is nice & all, but it's use is a bit limited when everyone has access to literally the entire game libraries for pretty much every system already. Kinda redundant. If you have some sort of rare prototype or something along those lines that u want to dump then yeah It'd be great for that. And it's very cool to see a device like this that can read carts for a multitude of systems. Pretty cool device!
@inubass
@inubass 2 года назад
This is so very well designed! and not as expensive as getting a dumper per supported device, or even a retrofreak, which doesn't do n64. Man, what a time to be alive!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Totally agree, what a time we live in 😁
@davidk.4593
@davidk.4593 2 года назад
Don't buy from Save the Hero. They have nothing to do with the open-source project. They just took the code and cashed in. It's basically a bootleg, with shoddy quality, since Save the Hero can't solder properly.
@inubass
@inubass 2 года назад
@@davidk.4593 time to promote the original project, then! You can even order the PCB with the SMD components done for you.
@inubass
@inubass 2 года назад
however, this is open source. If you build it, you're allowed to profit. Hardware is not free. This goes for either this project, or the guys selling them in etsy.
@kazinwho
@kazinwho 2 года назад
This is super cool. Man, I wish I'd have waited to sell all my old carts, I could have been playing those exact roms now lol
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Yeah, I’ve sold my fair share of games from my collection that I wish I hadn’t 😅
@Lenoh
@Lenoh 2 года назад
And then there’s me, who regularly went garage saling and flea marketing ;D
@captainthunderbolt7541
@captainthunderbolt7541 2 года назад
This thing needs to be incorporated into the Mister FPGA!
@HybridDivide
@HybridDivide 2 года назад
That's very cool. I'd hope that Gameboy Camera support could be added in via Firmware update. Other than that, and the other systems mentioned, the only other thing I'd like is an interface for the various memory card types out there. Though, there's enough of those to justify a separate device altogether!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Agreed! It would be great great if there was gb camera support. Finger crossed 🤞
@mynamehasspacesinit8687
@mynamehasspacesinit8687 Год назад
What are you talking about? I was able to dump my GB Camera saves and load them in an emulator
@Punmaster9001
@Punmaster9001 2 года назад
Kind of obscure but, the design of this reminds me of "The Flask" that was created to back up amiibo data. I saw that on Wermy's channel (another retro tinkerer dude). The part that made me think of that though is he designed and 3D printed a protective shell for his "Flask" because, like this All-In-One device, the sides are exposed and risk getting dirty inside.
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Still need to get my hands on the flask
@Punmaster9001
@Punmaster9001 2 года назад
@@MachoNachoProductions I want to get one, but I don't know that I need one right now
@PlantedWave5190
@PlantedWave5190 2 года назад
Heya! I saw on the Save the Hero store page that they are selling the international 50-pin Master System adapter for their cartridge reader. Do you think Save the Hero will plan on working on a Japanese 44-pin variant of the adapter supporting Japanese Master System/Mark III/SG-1000/SC-3000 cartridges and/or SEGA Card/My Card games via the Card Catcher? Also, will they plan on working on a Game Gear adapter?
@exodous02
@exodous02 2 года назад
There were adapters in the Kickstarter. The dip switch settings are printed on the adapters.
@juguetes123
@juguetes123 2 года назад
I would like something like this that I could hook it up to the TV and play when I come home from deployment.
@spidermcgavenport8767
@spidermcgavenport8767 2 года назад
Love the Retrode2
@MachoNachoProductions
@MachoNachoProductions 2 года назад
I’ve heard good things about it
@voteDC
@voteDC 2 года назад
Would the device dump games/backup saves through a converter? For example could you plug a Power Base Converter into the Mega Drive slot to backup Master System games?
@moonlambo5229
@moonlambo5229 2 года назад
Very niche product but still very cool!
@Cinderkin
@Cinderkin 2 года назад
This is actually pretty sweet
@MachoNachoProductions
@MachoNachoProductions 2 года назад
I agree 😁
@r.a.w.talentart
@r.a.w.talentart 2 года назад
Super dooper smashing great....as always
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Thank you dude 🙏!!
@cebia
@cebia 2 года назад
hey tito. I have researched a bit and, and find out that you can connect nes games to snes slot. you just need to have a transition. that's why it's on the menu :) you can definitely do that with the other cassettes too :) sorry for my poor english i have used google translator. really appreciate your videos they are instructive and good. love from norway :
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Hello Colin! Thank you for sharing! Yes they have several adaptors. Like you mentioned they have one for the NES and also for the NGPC and wonderswan. It’s a very flexible platform 👍
@Jonny5a
@Jonny5a 2 года назад
With the issues I have been having finding the adapters for my old retrode 2 this may be on my wishlist. Though will depend on the adapters for Master System and GameGear for me
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Yeah, I’m hoping to take a a look at the adaptors when they are available
@Jonny5a
@Jonny5a 2 года назад
@@MachoNachoProductions Great to hear, am looking forward to it :) Legitimately thought about making my own for the Retrode.
@kevinfrmkdz
@kevinfrmkdz 2 года назад
😮 so cool!!!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
As is it’s great! It has a ton of potential too!
@skins4thewin
@skins4thewin 2 года назад
See this is the type of device they need for the MISTer to allow it to play original cartridges. That would be awesome!!
@Dot-Ee
@Dot-Ee 2 года назад
i would love to find original carts one day. all i got is fire red and would love to get the OGs
@Aeduo
@Aeduo 2 года назад
Will it dump master system if you stick a power base converter on it? Otherwise, looks neat. I'd imagine there'll be firmware updates for compatibility.
@SuperNicktendo
@SuperNicktendo 2 года назад
Cartridge slots on new stuff is notoriously grippy. Hopefully it doesn't damage the pins over time by scraping the metal. Still a nice device. Wish this existed before my link to the past save file got nuked.
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Yeah it’s super grippy. I also hope it doesn’t cause damage 😬
@genericname872
@genericname872 Год назад
What do you think about the polymega? It essentially dumps all of these too. It also dumps others… although the rooms are proprietary to that machine…
@lucho3410
@lucho3410 2 года назад
Wow this would be perfect for my Super Mario RPG which till this day still has my saved data stored on the cart
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Oh man, got to get that backed up asap 😅
@ern1813
@ern1813 Месяц назад
This is game changer, Literally.
@maxrichards5925
@maxrichards5925 2 года назад
Oh I need this! I have a bunch of sega genesis and N64 carts that I’d want to dump so that if I want to put them all on my everdrive or emulate them through software.
@tumest
@tumest 2 года назад
Oh shoot, I built a whole stack of these late last year and have been dragging my feet about listing them on ebay. Gotta get my butt in gear, it’s a tremendous little box.
@patrickarnold237
@patrickarnold237 2 года назад
I want to back up my wwf no mercy cartridge. Because of the infamous. Save glitch. Can I dump the save file then if the save glitch happens would I be able to just put my latest save file dump back on the cartridge?
@Jamessheffield11
@Jamessheffield11 2 года назад
Have already built mine. Pretty much did it just to challenge myself after finishing Makhos portable cart read (awesome, btw). These devices are so much fun to build if you have the skillset!
@mazda9624
@mazda9624 2 года назад
This unit really looks like must have! Now I just have to pray that my save batteries just last a few more months until I can get my hands on one
@joysticksnjukeboxes
@joysticksnjukeboxes 2 года назад
This is awesome but what I really want is a cartridge adapter to plug into my MiSTer and turn it into the ultimate FPGA console!
@LovelyAlanna
@LovelyAlanna 2 года назад
it seems like a good device, saves are very important if you have some sort of emotional attachment to the games, I would only want to keep a backup of my pokemon in 3rd gen, but I can do that with a ds and some useful homebrew, all other games seem like a chance to play them again when their save files go *poof*
@genericname872
@genericname872 Год назад
Is there any update on this? I’m seeing this a year later, and clicked on the link. I can’t figure out how to order one. It also looks like a new version that holds additional systems is being developed. Is that what I’m seeing?
@powerfulaura5166
@powerfulaura5166 2 года назад
Can you connect this up to a computer like the Retrode 2 or GB01? Thank you!
@DinoBaldi
@DinoBaldi Месяц назад
do you think that could be possible to use this device with few modifications, to read a real cartridge directly attached on a raspberry pi with emulators running ?
@ericochoa4034
@ericochoa4034 2 года назад
Would be cool if you did a video on how to update the firmware!
@omegamog
@omegamog 2 года назад
Looks really cool. Not a fan of the fiddly switches, I feel like I may fry my games.
@nerdicorgi
@nerdicorgi 2 года назад
It'd be really nice if, instead of manually toggling switches for each type of cartridge's you want to use, it replaced the switches with relays - that way when you use the UI to select the cartridge's type, it can automatically toggle over to the correct voltage/EPP/ClockSpeed(s).
@MachoNachoProductions
@MachoNachoProductions 2 года назад
That would be awesome!
@weaselwolf
@weaselwolf 2 года назад
I wonder, will it read Master System carts via the Genesis master system adapter if you have one?
@Fuzzy-88
@Fuzzy-88 2 года назад
Pretty sweet device to add to my backup collection! 👌
@Evercade_Effect
@Evercade_Effect 2 года назад
I love videos like this with crazy, cool retro related devices like this. I also support anything that enables video game preservation. It would be great is a device like this could be combined with the Mister project. Put in your cart, set the dip switches, plug in your controller and you're off to the races. As always man great content.
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Totally agree! A cart adaptor for the mister would be amazing!
@philg8556
@philg8556 2 года назад
Kinda wish it had a way to attach a CD reader to backup my CD based games as well. Would also be nice to have a general port that could read memory cards as well such as the PS1 and N64 memory paks.
@nozomuitoshiki9292
@nozomuitoshiki9292 2 года назад
The complete system version could do it but wasn't shown on video - for reading and writing back memory cards.
@briangilmartin662
@briangilmartin662 2 года назад
I would love it if a future revision of this thing supported NES games! But even now, what we've got so far is pretty cool!
@MachoNachoProductions
@MachoNachoProductions 2 года назад
Me too, nes support would be great!
@belangerpm
@belangerpm 2 года назад
Check out the USB-NES. Supports NTSC, PAL, Famicom, and many more. Can also read/write battery backed saves. DIY kits and pre-built models are available on eBay.
@MWSJoey
@MWSJoey 2 года назад
Can this product write to cartridges? I've been wanting to make custom GB/GBA carts and been eyeballing a GBxcart RW, but if this does what that does and more, I'd get one of these.
@johnniewinwin3432
@johnniewinwin3432 Год назад
Very cool
@raggedstr
@raggedstr 2 года назад
I may have missed it but can you reupload save games back onto the original cart once you have changed it’s battery?
@Stoneheach
@Stoneheach 2 года назад
Awesome Tool! Is there any way to still buy this? Unfortanetly there is no way to still support the Kickstartet Campaign atm.
@genericname872
@genericname872 Год назад
What about using a genesis converter to also backup game gear, master system, and sg1000 cartridges?
@Sinhalayaki
@Sinhalayaki 6 месяцев назад
It can extract ROMs, fine....can it write onto flashcarts like the pico n64 flash carts? Is this just some archiving tool??
@thesillyhatday
@thesillyhatday 2 года назад
The Gameboy Camera should work with just a software update. The cartridge is quite unique in how it is addressed, I think it has a unique memory bank controller from memory
@reallydumbforeal1
@reallydumbforeal1 2 года назад
so if the internal battery/save file of a game dies, does that game go down in value?
@Jay-uu5lu
@Jay-uu5lu 2 года назад
I can understand backing up saves especially for n64 but for dumping Roms it's basically easy to go online download those not to mention downloads are extremely fast because of how small those are now
@shivasthong4924
@shivasthong4924 2 года назад
Playing the data pulled from people's own carts makes them extra special. Its essentially like making your own cookies.
@tendingstream7388
@tendingstream7388 Год назад
3:38 the "unused" port is a dc port, needed 5 volts
@Anythingandeverything007
@Anythingandeverything007 2 года назад
Why am I watching this? I don't even have the carriages anymore