Everything about the laptop backlight, LED Screen Voltages and Signals 

This is really nice. I really appreciate people like you, who makes a lot of work to share knowledge about electricity and other stuff. There is very little information about that thing, witch you explained very nicely. Thanks a lot of these videos! :)

Honestly I should thank you very much for this video and this gentleman. I have an Asus Zenbook UX330UA 3 months ago with the black screen. I had already checked all the tracks, apparently burnt out components, damaged cables, power outages, after all, it was almost certain to buy another full screen. But after watching this video, I went to test the mentioned voltages (LED_EN, PWM) and everything was ok, but I remembered the fuses that he showed just before, and amazingly, when testing continuity in one of them, one did not whistle, success! Localized fault, fuse blown. With the multimeter on to measure high currents (10A) I connected it in series with the fuse and Voilà. The screen lit up properly, with my beautiful wallpaper, now just looking for a new fuse to replace. Thank you so much for sharing this information. It really isn't easy to find content on this level of quality hardware. You are amazing, I am another subscriber!

I really appreciate people like you, who makes a lot of work to share knowledge about electronics and other stuff. Thanks for this tutorial.

Thank you sir for your video's another one for the books. I bought a Samsung Tab 2 with the screen having issues changing colors and weird lines on it so I remember one of your video's so I bought it and fixed it so easy...

This is my new favourite RU-vid channel. Thank you so much for all your tuition and hard work Sorin - it is much appreciated. If ever you come up to Liverpool - i'll buy you a beer :-)

Zdrastvuytye, moy drug! Thank you for this very helpful video on material not covered anywhere else, you make this stuff look easy. My Toshiba CL45 had no backlight, and after watching your video I found a blown SMT fuse on the 19V side and fixed it. Balshoye spasiba! PWM=pulse width modulation. Varying the duty cycle (% of on/off time) to the LED backlight controls the screen brightness.

That's the Mars Element , working its influence ; thanks for showing up full of cold , you teach me so much , get well soon my friend

You are my hero brother. Helped me outta a bind. Taught me so much. Thank you.

what a brilliant tutorial. very detailed. Long live to you sir!

thanks ... a very very good explanation ..the jumpering we also do but u explained it so simple.

Awesome videos. watching all the way from Kenya.

Get well soon sir. Thanks for the great video

Thank you so much for this video, gave me the confidence to attempt again to repair my laptop.... located the fault and now fixed.

Thanks sir.. you explain complex problem so nicely..it helps a lot

Mr. Sorin , we need more & more lessons like this , carry on pls

Good videos, Thanks for uploading them.

It is another very very useful tutorial for us,, Thanks so much ,, And also get well soon mr.sorin ....

Thank you so much my beautiful teacher

Thank you! Hope you get well soon.

thanks for for the info you are a good teacher and electronics repair man!!

Hi Sorin, very efficiente explanation on how the work the signal thank very much

this knowlege is gold.thenks professor.

thumbs up for a legend 👍🏻

Thank you sir. Great lesson there.

Thank you for sharing your knowledge. great videos. gracias

I love ya man, you are a great teacher and you know so much.

Thanks for share, very important procedure for test the signals to turn on the backlight leds, !!!! :)

Thanks so much for this tutorial!!

The PWM stands for pulse width modulation. jumping it will mean the "mark time" is 100% therefore full brightness even if the user tried to dim the backlight using the keyboard. Good video keep them up :] I like seeing repairs from different perspectives. The difference between knowledge and understanding.

hope feelin better nice video

Thank you for sharing the diagnostic tips

Thank you, helped a lot with my assigment!

love the videos lots of good knowledge YA ! i lean from you many things YA (in russian accent) after i watch these videos man i always find myself talking like you YA lol thanks for the knowledge though much appreciated

Nice tutorial. I hope you get well next time. Get some rest and warm your self and take something heal.

Thank you so much, I've learned a lot to your video

Thanks Guy, you help me solve my display issue

Thank you Mr.Sorin!

Very Accurate, Thanks for this boss.

thank you ...really really i appreciate your help...thanks alot...

i repaired a laptop and and an emergency lantern because of sorin his vedios are great!

Thanks dear i have a short circuited lcd even though i removed those short circuit, 3. 5 was missing in led en but when i shorted that with pwm, the led eventually start up and 3.5 voltage was there on both points Screen was N156BGE❤️

very useful thank you so much

thanks for tutorial , a small correction the PWM (pulse wide modulation) is not POWER but the signal to control the intensity of the backlight!

sir very nice tutorial, sir you are explained very nicely.

Thank you sir,your video very very helping for my knowledge sir thank you very much sir.......

thanks alot ..for teaching us

I have a laptop with a dead screen. I will definitely check it out with your tips. Thanks.

Thank you so much sir, hoping to pay you a visit after covid-19

Absolute gold mine.

Thanks very much again

I am new in laptop repair though little experienced in mobile phone repair.in today smartphone PWM(Pulse width modulation ) singnal is generated in a 6leg light ic with direct battery voltage (3.7) and EN Signal from Power ic. In this section mostly the output diode or main supply gone faulty.thanks for your tutorial.

bets regards from Poland pozdrawiam zajebiście tłumaczysz człowieku

many thanks, sir .

Legend right here!

Thank you sir.

Great tutorial man! Thank you very much! I need to vape to get this job done!

thanks sir good job

thanks bro. my same problem and i only clear connector .. backlight working . again thanks

Hoping you are feeling much better my friend , Maybe when you went to Chafford Gorges Nature Park you caught something :)

Thanks 😊

You are a GURU of this... i appreciated all your videos about this issue. I Have an Asus Fx504 (gaming laptop) it has a backlight off. I tried all of your advices, change ribbon cable and led also. Voltages on led board are fine..19V, 3,3v Led-PW ,3,3V led-en. All Voltages on mainboard ALL fuseS, mosfets, etcc are WORKING FINE!!! But Backlight seems doest't work still. I don't know what can i do for repair my notebook! :(

Really enjoy your channel. I have a similar problem with similar device. Toshiba satellite laptop that has backlight at 100% brightness, any lower the backlight goes out or flickers. Replaced LCD screen (each came with an inverter) and also replaced the cable salvaged from another laptop. Also tried disabling the Intel HD power saving options and in power management, still having same issues. Any suggestions?

Hi you are great man 👍

thank u very mutch sir.

Thanks. whit this video i found a short to ground of pmw signal in the video flex.

very good

I need your knowledge!

thankx a lot

thanks for the video. what is that ribbon cable called? I have display by external monitor but not enough light. hoped laptop would be of inverter type but it isn't. it's a Toshiba c55 a 1n1 TruBrite® HD TFT High Brightness display with 16 : 9 aspect ratio and LED backlighting. so is it this cable I need to change first? hoping to avoid a whole screen purchase many thanks

PWM means Pulse Width Modulation. By changing duty cycle on this pin we can continuously vary the brightness

Super

What was the liquid thing that you used for cleaning? 99% alcohol? or something else? I am a newbie in repair school. I just started watching ur vids a few days ago. Thank you for sharing ur knowledge.

Get well soon

I have an LP17WP4 LCD screen from an old laptop. I just want to use it for illumination but don't know how to make the connections. Would it work on 5 volts or I must apply 12v?

thanks very much i just fix one with the jumper from lcd en to 3.3v

PWM mostly its a Pulse width modulation for lcd backlit Cold Cathode Fluorescent Lamps it is sending signals for inverter in your cause.

Isn the PWM signal a pulse width modulated signal to adjust brightness by duty cycle, rather than analogue voltage?

Hi sir I am very happy to follow you on your good videos sharing knowledgeable ones each have unique experience sir I'm having one question on this screen voltage can we check manually without connection between laptop mother board to confirm that screen is good or bad? Please clarify if possible

Tbh i follow all your videos and it has inspired me alot. Can you please show me a video of fixing the touchscreen issue in sony vaio pro 13 i7 laptop. Thank you.

Hello, can you help me please¿? I have a Dell XPS 15 Laptop, the backlight is off before Windows, even in Bios. External monitor is ok with backlight. I Change the entire Screen (LCD+Cable) and still wrong. I see that with AC adapter the backlight brights 10% more than with battery only (10% darker almost invisible and image flicks a bit). The screen can´t dissasembly and i can´t manage the LCD board with inverter but Screen i purchased is new. I think can be a faulty motherboard but write to you for give to me some advice. Thanks very much. Regards.

Thanks for everything . You a the best teacher I know. I am technic for computer in Africa, Mozambique. If I need you help how I get you ???

Thank you my Dear Teacher and my Hero ... after 1 day working and looking for the reason which caused backlight issue! finally I fixed by this video and your very useful information, big Thanks My Dear Teacher 🙏🙏🙏 ❤️

Hi, Sorin! I have a weird situation: I have a LED laptop display with only half of leds turning on (it makes the screen look darker in one corner) The weird thing is that at boot they all light up but then that half of leds quickly turns off. Do you know what might be the problem? Thank you!

get well sir.. dont die ok.. we may not see one like you to teach us.. thanks u,

Pwm means post with modulation which is variation of voltages on with of a square tooth signal

In a situation where a normal current is in all the places, what do you check next week?

I want to learn the Electronic repair of laptop and phone.if you have ser any course os that please and thank you very much of your video.

nice video and knowledge to share by the way if the screen no showing backlight can i jump the wire the same as you did?

hello my friend, i have one samsing 17.3 led laprop screen . The screen have controller off. Is posible to use controller from 15.6 screen ?

Good

need help have compaq presario C300 with altec lansing sound was on screen went out, powers up just no screen, tried using external monitor nothing, wants screen fixed, but being older i understand might be simple fix to inverter,cffl, to motherboard question is what should i do and start? and then if it was motherboard issue ? buy replacement ,used or look for other motherboard that is very simuliar , like idea cause i can update , ore ram , hd everything up to todays standards if at all is this kinda modification possible, i know that many companys release same parts under different names, etc same theory your views please

What to check if there is backlight but not picture?I havent seen such situation i think on your videos as i remember

sir is that we need osciloscope to check like signal thing on lcd ?

Sir good evening pls where do find the fuse on dv 6-6143so mother board

hi. i have a asus laptop with problem with display. the backlight is turning on when booting in windows. external display is fine. I measured led-en and its 0v when backlight is off. So i jumpered led_en test point to a 3.3 vdd line and everything is fine. Is this gpu or lcd screen problem? and now it can go to sleep mode? backlight always on?

sir which motherboard is best for i3 2120 prosser for desktop

Hello there. Can you tell me how much power does a laptop screen require to light up. I ve a damaged screen which gave only white light while attached to laptop. I want to use the laptop screen as a light for some other purpose. Can you help?? Sounds crazy doesnt it

Hello Sir,I like your video very much.I'm learning many things watching your videos.How to contact with you? I need your help Sir

Hi, interesting video But now, i have disconnected my lcd laptop, and now when I turn the laptop on, I have the 8 beep error, that is "not lcd detected Which pin needs to bridge to avoid this issue, or if I able to cut the wire and plug-in back to the motherboard which wire should I splice?

where to get 19 volts if the problem is in the 19 volts hoping on ur positive response thanks