Everything you need to know about Holographic Heat Transfer Vinyl

Подписаться 126 тыс.

Просмотров 49 тыс.

50% 1

Subscribe to Expressions Vinyl’s Channel Here - goo.gl/Y3jPi4
In this video Jessica talk all about the holographic heat transfer vinyl and what you can do with it. Holographic vinyl is made up of three layers. The backside adhesive, the middle holographic vinyl and a clear top layer.
If you’re using a Cricut you want to put it on your fabric setting. If you’re using a Silhouette Cameo put your blade at a 5, thickness 20 and speed at a 5.
It doesn’t matter if you use and iron or a heat press but you need to make sure your temperature is correct. The holographic vinyl likes a little bit of a hotter temp, around 320 degrees or so for 15-20 seconds.
If you’re thinking about trying out the holographic vinyl check out our website! goo.gl/yhm29n
Expressions Vinyl gives inspired crafters the tools and resources to bring their visions to life. Founded in 2008, and one of the original pioneers in the craft vinyl niche, Expressions Vinyl has created the benchmark and established its reputation for providing the best vinyl and customer service in the industry.
Always striving to provide value to our fans, this RU-vid channel is one way of giving as much value as possible.
Find Expressions Vinyl here:
Website: expressionsvinyl.com/specials
Facebook: / expressionsvinyl
Instagram: / expressionsvinyl
Pinterest: / expressionsv

Хобби

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@loismaddux4800 5 лет назад

Great video! I had no idea of the tips you provided nor did I know I could make it look like rhinestones!!

@caroljarvis3604 3 года назад

I just want to say that you are the first one that I have found that really explained holographic vinyl I used the fabric setting (canvas) it cut right thru and I love it thank you thank you

@AfroLatinaSoul 4 года назад

Awesome video! Informative and to the point. Thank you!

@cherylwood1454 4 года назад

Your setting numbers were perfect for my Cameo . Thank you.

@evelynmartin8170 3 года назад

THANK YOU! I was just about to throw away ANOTHER design I cut out & now I don't have to bc I just have to roll it to get it apart! Yay!

@shadonnaskitchen5398 3 года назад

Mmmaaaaannnnnn. I've been watching youtube for so long trying to figure out why this one holographic foil sheet i had wouldn't peel after trying everything. you solved my issue in 2 seconds, the fabric cut setting. it worked immediately. thanks a bunch!!

@djhillel 2 года назад

Thank you, for my Cricut explore air, I used the fabric canvas setting and it worked perfect.

@BadNabMandy 5 лет назад

I use the Metallic setting on My Cameo 3 and have never had a problem cutting holographic htv

@sallylong5908 5 лет назад

The "faux rhinestone" idea is great - thank you!

@Expressionsvinyls 5 лет назад

You are very welcome!

@lilmocha117 3 года назад

I'm a bit behind but, where can I find this type of vinyl?

@eyadiramoreno7559 4 года назад

This is so helpful I could not get how to use holographic and I ended up frustrated and threw the piece I was working on. But I ordered some more and now I know how to use it and loving it. I even like I can use as if it was rhinestones!! Thank you so much

@Expressionsvinyls 4 года назад

Glad it helped!

@Quilt4Joy 3 года назад

Great video. Thank you.

@tamikka09 5 лет назад

Great tutorial

@joannep8300 4 года назад

The video was great and you were great in your descriptions. I missed the part about what mat to use to cut my holographic vinyl.

@Expressionsvinyls 4 года назад

In the video she did not cut with a mat, you would are able to cut with or without a mat.

@t.acaldwell7599 2 года назад

Thank you this was very helpful

@Expressionsvinyls 2 года назад

Glad it was helpful!

@dd60622 3 года назад

Thank you.

@daynaholmes6774 3 года назад

I don’t know how this popped up but thank you!!

@myssialexandra349 3 года назад

Thank you for the rhinestone tip! So cute and I have a great niece on the way! Purrfect onsie idea! Question... I layered 2 holographic colors onto each other. Any way to save it now?

@Expressionsvinyls 3 года назад

The top layer will come off in the wash eventually. Sometimes it only takes one wash. It may or may not leave an adhesive residue on the under layer.

@Kicatsjeeppups 4 года назад

how do you get the white outlines on the black shirt holographic vinyl? fyi... love your videos, simple and to the point!

@Expressionsvinyls 4 года назад

Hi, we offset the letters for that small outline. If you are using a Silhouette machine that is what it is called in the system. If you are using a Cricut then you would want to find a font that has a shadow to it.

@nancyrucker3091 2 года назад

Love the look of holographic iron on and wondered if you could put it on coasters? and if so, what temp to use

@Expressionsvinyls 2 года назад

We have seen the vinyl applied to a range of materials. Best case, you want to try to reach the temperatures required to apply the vinyl, however, because a coaster doesn't need to be regularly laundered, you may be able to reduce the temperatures if the material you are applying it to cannot handle the heat. Try some tests to see what it can handle. Application settings for the vinyl we carry can be found here! expressionsvinyl.com/machine-settings/

@adriennejones8622 4 года назад

Great video! I'm using this for my tshirt logo and the issue is it buckling as it stretches across the shirt. What is the best way to prevent this from happening?

@Expressionsvinyls 4 года назад

Is it buckling when someone is wearing it? If so you may want to get some stretch vinyl. It doesn't have the same look as holographic but it will stretch with the shirt expressionsvinyl.com/heat-transfer-vinyl/siser-heat-transfer-vinyl/siser-easyweed-heat-transfer-vinyl/easyweed-stretch/

@sarahfitzpatrick4022 2 года назад

I found glitter iron on worked perfectly but cutting 2 times

@Expressionsvinyls 2 года назад

Great! I will use a x2 setting sometimes as well!

@brendaloveless6873 5 лет назад

You mentioned the rhinestone images at the Silhouette store, does Cricut have such a thing?

@7707377016 5 лет назад

Yes they do

@teniquashields9078 4 года назад

I got a question. How did you set your mat to get the look of that cupcake?

@Expressionsvinyls 4 года назад

I am not sure if I understand your question. Are you wondering how she achieved the rhinestone look?

@robinheck762 4 года назад

There are several fabric settings to choose from. I have the Cricut Maker, which one would I pick?

@Expressionsvinyls 4 года назад

The test cut setting for the Holographic is Category Iron on setting holographic Pressure default. Do a test cut to make sure it is the correct cut setting before cutting the full image. expressionsvinyl.com/machine-settings/

@my_speakingspot 4 года назад

Hi did you ever figure this out? I also have a Maker and there are tons of fabrics to choose from.

@wandapanick2236 5 лет назад

I'm lost about the rhinestone portion of it how do I get the rhinestone look from the Holographic vinyl

@yvonneredford490 5 лет назад

You need to find an image made up of dots, create your own with dots or you can purchase a rhinestone pattern from the Silhouette store. It's the dots that are cut out that end up looking like rhinestones.

@denisemakuhmierzwa4721 5 лет назад

I have a cricut maker. Would I need to cut it twice?

@Expressionsvinyls 5 лет назад

No, not necessarily. Try the the starting cut setting: Category Iron on, Setting Holographic and pressure default. Do a test cut and adjust the settings if needed.

@winxtwins 3 года назад

real question i heat pressed mine on with the plastic sheet let it cool and took it off and it was smooth and i saw a bunch of people then go over it but with parchment paper on top and when i did it wasnt like as shiney anymore and was embedded into the fabric and took the fabrics patttern what is the correct way to put vinyl on a shirt also how would i do this without having the decal on the shirt rip or crack????? another problem i have on fiols that are holo or just not sports flex

@Expressionsvinyls 3 года назад

These may help. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZjLjYDWjiFo.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uCuFjANhjXI.html

@momcasey1474 2 года назад

I was using the holographic iron on for the first time… I had a problem with the top layer which with the hot pink or fuchsia separating from the silver but only in places. Was that a cutting issue?

@Expressionsvinyls 2 года назад

We've seen this happen with either a hot peel or a cut setting not deep enough.

@MrsRia79 5 лет назад

If you want to include glitter htv on the shirt as well, which htv do you press first? Also, can you layer glitter on top of holographic?

@Expressionsvinyls 5 лет назад

Both Siser Glitter and Siser Holographic are pressed at 320F degrees. You could press either one first. Since glitter is a warm peel and Holographic is a cold peel, it may be easier to do glitter first, however. Holographic is one of the materials that shouldn't be layered at all. You could always do the knockout method to get the layered look without being layered.

@MrsRia79 5 лет назад

Expressions Vinyl thanks for responding! I appreciate it.

@Expressionsvinyls 5 лет назад

You are very welcome!

@carolynnixon1137 4 года назад

Expressions Vinyl is in

@MyNik1979 6 месяцев назад

Do you happen to know if the cricut silver sparkle HTV, and the siser sparkle holographic htv look identical? I’m having a hard time getting more of the cricut brand and haven’t used the siser to compare the look. I need them to be super close or identical as it’s for a team but hate to waste $ ordering if they are not.

@Expressionsvinyls 6 месяцев назад

We are unsure how they compare to each other.

@Slimm_Sheedah1 4 года назад

Can you use this in resin and acrylic?

@Expressionsvinyls 4 года назад

This type of holographic is heat transfer vinyl for fabrics(shirts...etc.)

@jonwilson3439 3 года назад

My cricut only has a "bonded fabric" setting. Is that the same as the "fabric" setting you are talking about?

@Expressionsvinyls 3 года назад

It is the same

@samjennings4995 4 года назад

Are you pressing it with the clear carrier sheet on?

@Expressionsvinyls 4 года назад

Yes, you press with the clear carrier sheet on and then once it has cooled down you will need to remove that.

@biancaraposo3593 Год назад

Hi! If I’m using a normal iron what setting should it be on? I don’t have numbers in my iton. Or even a mini press?

@Expressionsvinyls Год назад

Each iron can vary in temperatures on different settings. Both the iron and the mini press could have temperatures listed for the settings in their instruction manual. Check out this video for heat transfer with an iron! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AUvJX-jVJqI.html

@seemaahmed5855 3 года назад

Hi I have Cricut Explorer Air 2. Can you please tell me what setting I use on it to cut holographic vinyl. you said fabric and I think fabric option is available for Cricut maker. Thanks

@Expressionsvinyls 3 года назад

Always test cut! Here is a link to our suggested settings page: expressionsvinyl.com/machine-settings/

@arianaelli96 3 года назад

I can’t believe one video solved all my problems I’ve been having for two months .

@yajairaguzman112 4 года назад

Would it be possible to layer with a print and cut ?

@Expressionsvinyls 4 года назад

You would need to do the knockout method so it looks layered, but really it's just puzzle pieced together

@patriciaerichsen4790 Год назад

Little piecing peeling up on first wear? Iron not hot enough or long enough?

@Expressionsvinyls Год назад

Either of those may be the issue, or not enough pressure. Check the recommended settings for the vinyl used.

@bewon4day 3 года назад

I use Silhouette Cameo 4 but still don't have any idea on the cutting of this easyweed holographic, any help?

@Expressionsvinyls 3 года назад

Try these settings! Remember test cuts! expressionsvinyl.com/machine-settings/

@scrapgirl6 5 лет назад

Can you use this in the cricut air 2?

@Expressionsvinyls 5 лет назад

Yes, you can cut the holographic with the Cricut air 2. We have found the fabric setting works well, but this is just a suggestion. You will just want to do test cuts to determine the best cut settings for your machine and blade.

@scrapgirl6 5 лет назад

@@Expressionsvinyls Thank you so much!

@GabrielleEther 4 года назад

What if you want to iron onto a holo hat? Will it burn the hat?

@Expressionsvinyls 4 года назад

It really depends on the fabric of the hat. We have made quite a few hats before and as long as the hat can handle the heat, the HTV will work great.

@girlygirltutus1505 4 года назад

I am new to this type of glitter and just tried to put vinyle on top after I put the holographic glitter. Can you not layer this with vinyl ?

@girlygirltutus1505 4 года назад

Never mind I just watched the part that I can't put anything on top of holographic. Nice video

@Expressionsvinyls 4 года назад

@@girlygirltutus1505 So you know for future projects, you are unable to layer on top of glitter HTV, Holographic or Metal HTV

@lizpaylago269 3 года назад

Why does my HTV look wrinkled after when my temp and time is correct? Any tips?

@Expressionsvinyls 3 года назад

What temp and time are you using on which htv product?

@puneetwadhwani4996 10 месяцев назад

What is the temperature settings it's Fahrenheit or Centigrade

@Expressionsvinyls 10 месяцев назад

Holographic is pressed at 320 F/160C for 15-20 sec. cold peel

@pamelaallen5908 2 года назад

Did you use a deep blade or fine blade?

@Expressionsvinyls 2 года назад

fine blade

@rachnatic 4 года назад

My holo ironed with creases. What did i do wrong

@Expressionsvinyls 4 года назад

Might be something to do with the heat or pressing time. Here's our recommended settings expressionsvinyl.com/machine-settings/

@rannmaloney 3 года назад

Can you use a cricut

@Expressionsvinyls 3 года назад

Yes!

@hazelann63 3 года назад

Can it be cut with scan n cut

@Expressionsvinyls 3 года назад

Compatible with all craft cutters such as: Cricut, Silhouette, Xyron, Craft ROBO, Graphtec, Quickutz, Inspirations, Pazzles, etc!

@reDeLee3 3 года назад

Can it be used on stretchy clothing?

@Expressionsvinyls 3 года назад

The holographic vinyl does not stretch, so we do not suggest that it be used on stretchy material.

@zootasplace7344 2 года назад

I have a question that none of the videos seem to answer, including yours. I want to know WHY I can't layer other vinyls on top of Holographic heat transfer vinyl. Why does it always have to be on top?

@Expressionsvinyls 2 года назад

The surface of the holographic vinyl does not allow the adhesive to adhere well. When attempted, the vinyl on top of the holographic tends to fall off within a short time.

@jackelineortiz6901 2 года назад

How I Can do a perfect cut

@Expressionsvinyls 2 года назад

Test cut (we often use a capital R smaller than a half inch) every time. Each machine, blade, and batch of vinyl can vary enough to require a settings adjustment. Sometimes adjusting the force(setting) a few points up or down is all that is needed, other times, adding a 2nd pass works best. Test and repeat until the vinyl weeds easily and does not cut into the backing.

@FiolettaArts 4 года назад

What are the washing instructions

@Expressionsvinyls 4 года назад

For Siser Holographic, wait 24 hours before first wash, machine wash warm or cold/mild detergent. Dry on normal dryer setting, do not dry clean.

@FiolettaArts 4 года назад

Expressions Vinyl thank you so much! I really want to try this out

@brenica1 3 года назад

Do you iron the shirt before applying the htv? My shirts after washing and drying shrink some and makes the holographic a little wrinkled. And they are pre shrunk. What could I do to prevent that?

@mdiazmd777 Год назад

Is it supposed to feel like a tape or plastic? Looks great however feels like it's going to come off.

@Expressionsvinyls Год назад

It is thicker so there will be a texture.

@patriciadagostino1257 2 года назад

Which fabric setting.

@Expressionsvinyls 2 года назад

On a cricut explore with the dial settings, Fabric is after cardstock +. Check out more settings charts here! expressionsvinyl.com/machine-settings/

@catdeeann 4 года назад

I like the holographic. BUT, I struggle with adherence after washing a couple times. Is there a trick?

@Expressionsvinyls 4 года назад

Hi, it sounds like it doesn't have enough pressure. We have see that with the holographic you need a lot of pressure applied to the fabric and vinyl. Then you will want to make sure it is completely cool before removing the cover sheet. Please let us know if you have any additional questions.