EVERYTHING you need to know about making stencils | DIY Stencils with Cricut | Stencils Design Space

Подписаться 44 тыс.

Просмотров 37 тыс.

50% 1

I'll tell you EVERYTHING you need to know about making DIY stencils with Cricut and DIY Stencils with a die-cutting machine. I will feature Design Space for this tutorial. I'll show you the FAILS and the SUCCESSES. Save time and money and do it right the first time.
• Cricut Design Space
--- ldli.co/e/qyr9m5e [ GN. ]
Timestamps - skip to what you need easily
0:00 Intro
0:58 Where to get SVGs to make Stencils
1:26 Editing SVGs to make Stencils
12:48 Materials to make stencils
14:29 Good vs. Bad stencil cutting results
15:50 Manual & Electric Cutting Machines
18:34 Cutting your stencils with a Cricut
23:38 Blending on DIY stencils
29:25 Cutting stencils on a Cricut - Results
GET UNLIMITED STENCIL SVGs $1 TRAIL: www.creativefabrica.com/promo...
(This link also gives you a discount membership if you choose not to cancel your membership)
Mentioned: Cricut Warranty Link bit.ly/cricutwarrantyinfo
Products Used - All linked below
🔗Links:
🤗 INK SQUAD: Join my channel for perks: bit.ly/3unA6cd
📢 My Website: myinkiefingers.com/
🛍️ Best Prices on Supplies: bit.ly/MIFKITS
🧧 My Etsy Shop: bit.ly/mifetsy
⬛ Kit.co shop: bit.ly/MIFKITS
📘 Facebook Group: bit.ly/2NE2WSW
📘 Facebook Page: bit.ly/3csKGWf
🎨 LIVE Online Classes: bit.ly/304DhsZ
📽️ WANT MORE VIDEOS? - Our Inkie Life RU-vid Channel: bit.ly/3n7VH4q
Social Media Links
💬 Come say Hi! - bit.ly/myinkiefingers
(All my Social Media links in one place)
Likes, Comments & Subscriptions
📢 Thank You very much for liking and commenting on my video. Not only does your feedback and 'likes' help me determine which videos you like the best, it truly does help my channel. If you like my channel please subscribe, I would love to become Inkie Friends💗
Supplies & Shopping
🛒 Best Prices on Supplies: (Choice Links) kit.co/MyInkieFingers
GET UNLIMITED STENCIL SVGs $1 TRAIL: www.creativefabrica.com/promo...
(This link also gives you a discount membership if you choose not to cancel your membership)
• Cricut Air Explore 2
--- ldli.co/e/3ork95e [ GN. ]
• Cricut Maker
--- ldli.co/e/m54xe7p [ GN. ]
• Cricut Maker 3 Machine
--- ldli.co/e/e2o51mx [ GN. ]
• Cricut Design Space
--- ldli.co/e/qyr9m5e [ GN. ]
• Cricut Replacement Mats Options
--- ldli.co/e/jq0jrzx [ GN. ]
• Cricut Replacement Blade Options
--- ldli.co/e/yer215d [ GN. ]
• Cricut Tools, Basic Set
--- ldli.co/e/p3qzoyz [ GN. ]
• Choice Page - 7mil Mylar (both are good)
--- ldli.co/e/rnrk3ex [ GN. ]
• Laminating Pouches 9 x 11.5in, 100-pack
--- ldli.co/e/omgd463 [ GN. ]
• Royal Sovereign 9" Laminator
--- ldli.co/e/lm3loj0 [ GN. ]
• Nuvo Stamp Cleaning Pad
--- ldli.co/e/xlm4x2l [ GN. ]
• Stainless Steel Scraper
--- ldli.co/e/1p4zrg4 [ GN. ]
• Wendy Vecchi Make Art Stay-Tion
--- ldli.co/e/d792x3e [ GN. ]
• 2" Bar Magnets
--- ldli.co/e/zr4od3d [ GN. ]
• Yoseng 10 pc Blending Brushes with Handles
--- ldli.co/e/9dl4q7m [ GN. ]
• Tim Holtz Distress Oxides Inks
--- ldli.co/e/kq4y5je [ GN. ]
⚠️ DISCLAIMER: myinkiefingers.com/privacy-po...
🎵 --Music--
Epidemic Sound: Queens And Kings (Instrumental Version) - Alexander Bergil
Sound FX: Epidemic Sound
Try Epidemic Sound for free - bit.ly/2UsnBLW (Referral Link) Thank You!

Хобби

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@_MyInkieFingers 2 года назад

Do you have a Cricut? Are you excited to make your own stencils? Which material/substrates do you use that I may not have mentioned? Happy Cutting! 😁🌷💗

@RainDropps 10 месяцев назад

Why am I being charged for "stencil backgrounds" I am doing the $1.00 trial, is that why?

@_MyInkieFingers 10 месяцев назад

@@RainDropps I'm sorry, I have no idea what you're talking about. It's free to watch my videos. There's no charge on my end.

@greenfox.96 4 месяца назад

Hi, i have a budget 200, what circuit machine i can buy?

@_MyInkieFingers 4 месяца назад

@@greenfox.96 I believe the Cricut Air is linked. If it's still available it's a great deal. 😁

@winstonsuz 15 дней назад

I like leaving more of a border around my stencil so I can use that space to tape it down to my project and not cover any of the stencil.. instead of using "slice" in design space I'm using "subtract" and you don't have those extra pieces you aren't using to delete.

@brusselea 2 года назад

Awesome video! I love making stencils on my Maker. An easy way to get rid of the design in the outer margin, rather than making a shape and welding it, is to just use Contour and get rid of them! I also always use my deep cut blade for stencils. It cuts perfectly the first time 99% of the time. Also my absolute favorite substrate for stencils is Grafix craft plastic. The same that is being suggested for alcohol inks recently. I have been using the grafix craft plastic for stencils for years. Also, Yupo paper works beautifully for stencils. So it’s a good two for one deal for card makers.

@_MyInkieFingers 2 года назад

Yes, that's certainly an easy way! Where's my head at sometimes! lmao 🤣😁 I too have the Grafix and have used it. That's a great suggestion Cindi!

@tiffanyross5618 Год назад

This video has been very informative!!! You’ve answered every single question I had, PLUS MORE! 🖤 Thank you! Can’t wait to get started 😁

@dorenesumner8943 2 года назад

Thank you so much for sharing. Love your videos

@kathysoc3733 5 месяцев назад

Very informative. Thanks!

@maryblevins5952 6 месяцев назад

Great tutorial! Can't wait to try. I am interested in making layered stencils.

@HawraStarseed Год назад

Amazing ideas thank u🌸💕😊

@bethdurbin3279 2 года назад

Oh my goodness, I was just thinking the other day about how I could make my own stencils and up pops your video, thank you thank you hon. I saved, drooled, and patted my ipad when I was watching this video. I can’t thank you enough for this video. You rock!!!!!!!!!!!!

@_MyInkieFingers 2 года назад

Great minds think alike! lol 💗

@journal_by_jet4674 Год назад

Thank you so much for this fine video i think, now i dare to make some stencils to

@deborahbuonomo296 2 года назад

Another great inspirational video! Thank you!

@_MyInkieFingers 2 года назад

You are so welcome Deborah 😊💗

@Bttrflyfan23 2 года назад

Thanks for sharing. I'm going to see if I can make the stencil too, but will need to watch the video AND take notes.

@_MyInkieFingers 2 года назад

You can do it!! 😉😁

@ashleyowens1093 2 года назад

You always teach me the best things!! New to Cricut and am really a card maker. This is perfect.

@_MyInkieFingers 2 года назад

I'm glad you think so. Thank you for watching 😊🌷

@sharoncollier6900 2 года назад

Fantastic job, Cindy-Lyn!

@_MyInkieFingers 2 года назад

Thanks Miss Sharon 💗💐

@karenmunson4401 2 года назад

Thanks for sharing

@joannrice8359 8 месяцев назад

very helpful

@khsculpture 6 месяцев назад

Thank You

@dellabourne1106 Год назад

Brilliant great tutorial thank you

@_MyInkieFingers Год назад

You’re welcome 😊

@lauramay5915 Месяц назад

You could also contour out those little bits. Much easier imo

@_MyInkieFingers Месяц назад

You absolutely can. Sometimes I forget there's an easy way in life! 🤣😊

@created2bless322 2 года назад

You hit it out of the ball park! Thank you for all of your tips and tricks, this is fabulous! I've only used card stock to make stencils, I know that's not ideal but it is what I have on hand and I used dies. I do have a brother scan n cut ........

@_MyInkieFingers 2 года назад

You can do this there. Just open the SVG is Canvas Workspace and cut. Not sure about all the editing abilities lol. Have Fun! 😁💐

@bevodaniel3384 2 года назад

Great video Cindy Lyn. I can’t wait to make some stencils. The metal scraper you use looks like the scrapers used for bread dough.

@_MyInkieFingers 2 года назад

Yup, it sure is. Repurposed! haha 😁🌷

@created2bless322 2 года назад

WooHoo 🙌🏼 gonna watch now, just had to make some noise🎉

@_MyInkieFingers 2 года назад

I like noise! lol 🤣💗

@peggyfitzmaurice4100 2 года назад

Thank you for the lesson. I will need to rewatch a few times to make it stick but It will sink in😄

@_MyInkieFingers 2 года назад

Thanks Peggy, there are timestamps too. That way you can go back to where you need to 😁🌷

@crafty_mommy2932 2 года назад

Dollar Tree carries those scrapers!!

@indiGoKae 3 месяца назад

I’m over here losing sleep trying to get this laminator technique to work 😭😭😭 HELP ! 🤯😫

@_MyInkieFingers 3 месяца назад

All I can say is follow the steps in the video 😉

@ginnettemcpake5884 2 года назад

I need a cricut lol all them bits that come out would be great for shaker cards

@_MyInkieFingers 2 года назад

Yes you could totally use them for shaker cards. I've often thought the same thing. I'm just too lazy to clean them up and store them 🤪🤣

@pearljenner3914 Год назад

Brilliant tutorial 😊 thank you. I want to use stencils on my polymer clay. Can I use Procreate to design my own the cut on my cricut maker ? I know I have to make it an sgv file ❤

@reginataddy7475 Год назад

Great video and very helpful! Thank you! May I ask where you got your cleaning mat to clean your stencils? You called it your scrubby cleaner.

@_MyInkieFingers 10 месяцев назад

In the description 👇😉💗

@elviras5403 2 года назад

Great video! Where do you buy your replacement blades for the scan n cut?

@_MyInkieFingers 2 года назад

These work wonderfully geni.us/nZdB 😁

@pearljenner3914 Год назад

Thank you for this tutorial 😊 could I ask what the cleaning mat thing is called and where you purchase it please ❤

@_MyInkieFingers Год назад

Sorry this is an old video. Can you telle at which time in the video you saw it? Thx so much 😉

@mrsmcphate 2 года назад

Great video!! I have a Cricut Maker and some 10 ml mylar. I guess that's no bueno? I thought a bit thicker would be better but you said no. Why? TFS!! Love your helpful videos!

@brusselea 2 года назад

I bought the 10mil thinking the same thing when I first started to try stencils on my Cricut. The 10mil takes many passes to cut, if it cuts at al. But the 6-7mil is perfect and sturdy. I have never had a stencil tear. The

@_MyInkieFingers 2 года назад

I find the 10mil to be far too thick than the industry standard for stencils. Many people don't have the deep cut blade too. However, if you have both then have 'ater for sure 😉😁

@vincemoser4636 Год назад

I got my bench scrapper from Dollar tree

@germainedubois8526 11 месяцев назад

I'm just learning how to make stencils - one question I do have can you take a digital paper that you love the design on and take that design and turn it into a stencil? And this is not stencil related - but do you need to clean your scrubbie cleaner and how would one clean the wet side. Love you tutorial videos.

@_MyInkieFingers 10 месяцев назад

I only cut them on mylar. As for your scrubby, just use Dawn dish soap 😉😊

@PENFOLD1962 Год назад

I can't see the BLADES LISTED! I'm looking for the most cost effective blade for the Cricut Joy! Thank you for this video. I'm hoping to make my own stencils for airbrushing and lure painting so I only need a small plotter.

@_MyInkieFingers Год назад

This isn't a video about the Cricut Joy. Sorry

@PENFOLD1962 Год назад

@@_MyInkieFingers You state ....DIY stencils with CRICUT! You don't mention any of the Cricut machines in particular!

@_MyInkieFingers Год назад

@@PENFOLD1962 wow calm down mate. As I said, this is not a Cricut Joy video. I wouldn't come to your house and be rude so don't come to mine and be a jerk. As a matter of fact, you're welcome to not come by ever again.