*LOVE* the humor!!!! Interesting look at the Series 3. I like the light setup, as well. My initial thought was on the inside of the flipup door to flood the work area, but the offset setup has me rethinking it. One good thing about the magnetic installation - try one set up for a given length of time, if you don't like it, spend 15 minutes or so and try something different, and no mounting damage done to the box (screws, holes, etc.) Keep up the great content!!
I bought some cheap metal tool organizers and made some brackets and riveted them to the shelves to make them fit in the slotted wall, and now I keep my chargers, impacts and drills in the hutch. It freed up the drill drawer, and I use the charging drawer for my Launch and other rechargable stuff. As for the stainless top, any sheet metal shop could cut one to fit the cabinet, but I like the rubber liner just fine. Bought the Icon light after watching this video. 👍
I just got the 56" box, hutch, side locker and 15" drawer unit. So far I'm satisfied with the quality. I tried to get the light and none of my stores had one so I said screw it and bought a generic light on Amazon and added magnets. I'm just a low end DIY guy so I think this box will serve me just fine
I have a 66" Husky and an old 48" Husky and I keep thinking of upgrading to 2 56" U.S. Generals... I don't really need to but I think it would look really good in my shop! I like the idea of them matching and being a little smaller for mobility.
That magnetic hutch light is a really nice feature. After seeing the base up close in the pictures, it's too bad that the 2" thick base on the hutch does not have a slide out work shelf. I'm sure HF had a target price in mind and adding a concealed work shelf throws the target retail price out the window.
The Den of Tools. That light for the hutch is awesome. I will be getting that fro my Matco toolbox. Thanks for showing it to us. Talking about the slots in the hutch. My Matco hutch doesn't have slots it has wholes in it like a pegboard but the wholes are way bigger than a regular pegboard. I can't seem to find anything that fits the darn thing.
i finally seen one with the hutch in person and i may sell my snap on box for it, i have been hugely dissapointed with my box, my us general roll cart honestly has nicer sliding drawers than my box,and now that the us general has full lenght latch releases its kinda got me sold
I'm a little salty I ordered my 72 inch slate gray box back in May when they released them. Back then they said early June I'd get it. Now it's gonna be early August.
I think the height issue is more related to it being a shorter box for the 6' and above guys so the hutch is sitting at a lower height. Not necessarily the hutch itself. Had a hutch on my matco box and it was too low for me, evem with th3 box sitting on 4" blocks of wood under the casters. I got rid of the hutch. Kept it for a year maybe. Probably 10 months.
My only complaint about the hutch is how far the door sticks out compared to the Icon. I have a tendency to wack my head every so often leaning forward for some stuff.
Get harbor freight to make av30 inch deep tool chest with all drawers from side to side and bring back the shiny handles with drawers a different color from the main box…… I’m tired of not having storage for my 58 inch prybars! And I’m not going to buy a crap-on truck branothat cost over $30,000….
I see a lot of mention of the hutch working on the 56" Series 2 but not Series 1 and I am confused. Currently I have a Seriws 2 56" top box on my Series 1 bottom box without issue including bolting them together. Am I missing something about the hutch not working on my Series 1 bottom box?
Got mine on sale recently for $105 off, just waiting on my side locker to get delivered, they are now telling it's been pushed back 10 weeks. I guess slate grey lockers are insanely popular or they are having to make mine?!?!?
Do you think the 56” hutch will be able to set on the 72” tool chest? I’m thinking so but I have cabinetry that just keeps me from being able to put the full length hutch on top. It would give me a 16” flat surface top of the tool chest to use as a shelf…
Do you know if the hercules and Bauer batteries are interchangeable, thanks for the videos, I finally talked my wife into letting me get this box. Keep up the great work. 👍
I have a series 1 box the new series 3 drawers in the middle still cannot store 1/2 or 3/4 deep sockets standing up. Like the drawer latches. If I owned a high level shop I would get a Matco or Mac box
Have had truck brands. Truth I'm getting rid of old snap on box for simple fact to get a hutch cost is the same as buying 72 icon box and hutch with the Ss top. They are all made the same just name on stamp makes the price go up
I’ve been between the us general or the icon. The only thing stopping me is the color choices on the icon. I’d love to see orange added to the line up. Anyway you could ask your contact at harbor freight about any updates they plan to make to the line up? Thanks!
Love your channel. I recently purchased 3 USG toolboxes and I want to get the Icon light bar for my 72". I cannot order it online and the store locator doesn't work on the website to locate one of these. I went to my local store and they couldn't order it for me either, but they did find one at another store about 1.5 hours away. I called to verify they had it in stock, and the claimed they did. I drove there only to have them tell me they couldn't find it and then couldn't order it either. It's frustrating to me that I cannot get one of these using every method. Do you have any suggestions? Or a contact at HF I could order this from? I need at least one, maybe two.
Can you do a video on how this is installed? I have an extreme tools 72×30 with a stainless steel hutch and don't feel like forking out 3k for the hutch, and feel like this will be a good middle ground. Any thoughts? Also thinking about trying to somehow hang the series 3 side cabinet on my box
No install per say as it just sits on top of the roller cabinet. The US Gen bottom boxes all have a lip around the edge and that plus it's own weight holds it in place. There might have been additional lockdown bolts if there were I didn't use them.
Ok I have a question for you being an ever. I would like to know which is better to use in an RV a brad nailer or an air strike nailer? Never needed one but I have some trim work I need to repair. Thanks for your help. Tool on....
Honestly, in most cases, glue is your best option, but I would use a Brad nailer if I had to. RV manufacturing is so like you can’t go with anything heavier. Most of stuff I see them do is with staples.
Any word if there will be a choice of black trim or bright trim on the Series 3? Series 2 was only available in bright trim, it would look a little silly to have a top box with black trim, or a locker with black trim when the rest of your storage is bright trim. Thoughts?
@TheDenofTools I’m wondering, how possible is it to remove the base on this hutch? I got a stainless steel worktop i really don’t want to loose and was wondering how critical of a component is it to the integrity of the hutch. Thanks!
That completely depends on how you use it. Personally, I like having the workspace I’m probably gonna get rid of my tekton box and get a 44 bottom and top box to go along side this
I don’t see the point in a hutch for a home gamer. If you’re wrenching for a living sure I get it but for a guy like me who wants a decent box for the home garage I don’t see the point.
Does anyone know or can confirm what accessories can be used in the hutch (talking about the backboard slot system specifically) I want to know before I start buying snap-on accessories like the monitor mount and laptop trays. If someone can confirm that would be great, thank you.