Follow the instruction below to perform a regular cleaning of the Evolis Tattoo RW 2 card printer:
Maintenance accessory: cleaning card
1. Remove the card feeder from the printer.
2. Remove any cards found in the feeder.
3. Insert the cleaning card into the feeder.
4. Put the feeder back into the printer, then press on the upper section of the feeder until it clicks
5. Open and then close the printer cover. 6 Hold down the control button on the control panel for one
second. Cleaning starts.
7. The used cleaning card is ejected into the output hopper.
Wait for 2 minutes after cleaning before using your printer.
Repeatedly running the cleaning card through the printer cleans the feed rollers, the cleaning rollers and the print head.
Find the consumables adapted to your product: myplace.evolis...
Contact us to find the nearest Evolis dealer: myplace.evolis...
Recommended cleaning cycle: whenever the ribbon is changed.
Mandatory cleaning cycle: when the cleaning warning is triggered (after a certain number of inserted cards).
The print head warranty is directly linked to regular cleaning of the printer. If the regular cleaning is not performed and if the warning light remains ON, the print head warranty is automatically voided due to a failure to comply with contractual maintenance obligations.
13 сен 2024