Excellent Build Quality Inside The UNI-T UT8805E Teardown | Voltlog

Подписаться 46 тыс.

Просмотров 2,4 тыс.

50% 1

In the previous video, I reviewed the UNI-T UT8805E multimeter, but it was jam-packed with info! So, I decided to dedicate a whole video to cracking this bad boy open. Let's see what makes this professional-grade multimeter tick!
We're about to embark on a teardown adventure, dissecting the UT8805E to reveal its high-quality components and construction. From top-tier Analog Devices op-amps to a powerful TRION FPGA, I'm gonna show you the heart of this impressive instrument.
Remember those potential issues I mentioned in the review? Well, UNI-T assured me they've been fixed in a newer revision. They're sending one over, so stay tuned for a follow-up video where we put the new unit to the test!
→Buy The UT8805E
EU Eleshop voltlog.com/y/70kmq
US Amazon voltlog.com/y/6cjt8
→UNI-T UT8805E Official Website voltlog.com/y/vpljb
→UT8805E User Manual voltlog.com/y/09g8u
→UT8805E Datasheet voltlog.com/y/6zq2s
→UT8805E Programming Manual voltlog.com/y/fhrtm
→LXI Tools Project Github voltlog.com/y/8jrn1
In this teardown, you'll get a front-row seat to:
A meticulous breakdown of the UT8805E's internal components.
A deep dive into key ICs like the STM32F407 processor and the AD7122 ADC.
My take on the component quality, assembly, and any potential areas for improvement.
A comparison to other high-end instruments on the market (mention specific brands if applicable).
Hit me up in the comments and let me know what you think!
Are you as impressed as I am with the UT8805E's build quality?
What features are dealbreakers for you when choosing a multimeter?
Have you had any experiences with other high-end multimeters?
Let's keep the tech exploration rolling! Subscribe for more!
#multimeter #teardown #review #UNI-T #UT8805E #electronics #electrical #engineering #testequipment #highend
→Support the channel via Patreon, Paypal or Bitcoin
www.voltlog.com/donations
→Support the channel by clicking these links (CommissionsEarned)
Aliexpress voltlog.com/y/kr0sa
Ebay voltlog.com/y/jzkfp
Amazon.com voltlog.com/y/qw4d3
Banggood.com voltlog.com/y/o4025
→Blog Post
www.voltlog.com/
→Timeline
00:05 Disassembly
01:24 Wiring
02:23 Main board
05:57 Analog section
10:36 Front panel & MCU
12:27 Buzzer Test
13:40 Final thoughts

Наука

Опубликовано:

29 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@IanScottJohnston Месяц назад

The transformer is mounted on the side and on an in-dented plate to give it the most robust mounting arrangement. Flat plates bend, throw in some angles and the strength increases.

@voltlog Месяц назад

Makes sense maybe from some weird manufacturing limitation because why wouldn't they be able to the same indent to the bottom metal plate?

@TYGAMatt Месяц назад

Feel free to send me that old glitchy unit when you get the new one. I don't mind putting up with it 😊 Matt.

@voltlog Месяц назад

That's a very valid point for those that are going to comment and trash the model or mfr because of something like that :-)

@jaro6985 Месяц назад

As you said, for DMMs like this higher sample rate trades off for less accuracy. But it can be useful for high speed measurements sometimes, more accurate than a scope. Guessing they limited the sample rate based on processing or something else. Good teardown.

@voltlog Месяц назад

Thank you!

@glenslick2774 Месяц назад

7:04 The logo on that UPRNS resistor network looks like it might be the logo of Thunder Precision Resistor.

@tonyh6309 Месяц назад

It is. Precision custom metal film networks, TCR down to 1ppm, stability class 0.025%. The Max6225 datasheet contradicts itself - the 1.5ppm typ, 3ppm max applies to the DIP package whereas the AESA+ (SO package) is shown as max TC of 5ppm in the table on the first page. Who knows what the typical value is supposed to be? (Not that 'typical' means very much).

@voltlog Месяц назад

Thank you for sharing that. Again, another valid point for me saying a lot of high quality parts seen in this assembly.

@Ruth_Asada Месяц назад

The manufacturer of these voltage dividers is a company TOKEN [Token Electronics Industry Co., Ltd.]

@voltlog Месяц назад

Nice! Thank you for sharing.

@davidvb3754 Месяц назад

"Entering the high-range category"..... I do agree with you, seeing the quality of the build, but it becomes also barely affordable for a hobbyist.....

@voltlog Месяц назад

Bench top multimeters are generally not the right choice for hobbyists who only use them occasionally and they don't need the precision or the accuracy of such an instrument. There are hand held meters that are more affordable for that type of usage.

@Ruth_Asada Месяц назад

About the same as rigol and siglent in this segment. Something is better, something is worse. But the general solutions and components are the same.

@voltlog Месяц назад

I generally agree with that view and important to add is that UNI-T price their models lower than the competition.

@SylwerDragon Месяц назад

to be honest Unity was and is always cheap and crap ..for expensive models. they are not crap but they are not special in any way so from all those close ups..it looks pretty bad

@sebastian_harnisch Месяц назад

What looks pretty bad exactly? Can you be more specific?

@voltlog Месяц назад

Please share more details, it's important to understand what looks pretty bad to you.

@SylwerDragon Месяц назад

@@sebastian_harnisch Hello. Yes i can share few details. 1. Cooling of those heatsink is not needed. Instead of small heatsink they could put bigger one or use chassis as heatsink as it is done with other models or they could use specific low dropout regulator 2. Those crimps/input terminals looks skimpy at best plastic doesn't look like any good choice..yes it is cheap but that is about it.. ..i didn't see any good precision resistor there..yes there were few but for good equipment you need good low tempco resistor with good voltage source. 3. Voltage source is so so ..nothing special i would rather use heated voltage standard instead of just solution on chip but this is just my discussion. 4. RF shielding isn't good as i see it.. i didn't notice imput dedicated chassis filter(but i might be wrong on this one). ..and much more.

@sebastian_harnisch Месяц назад

@@SylwerDragon I find it a bit difficult respond. I guess it depends on what you expect. You’re neither paying for Keysight nor are you getting Keysight. It’s not a reasonable approach to just say „you need this or that number of precision resistors. You have to characterize the unit and see whether it meets its specs. If it does this argument is pretty pointless. If it doesn’t then *that* is a problem. I agree that it would be nicer to have a voltage reference like the LM399, but then again, for an affordable 5 1/2 digits DMM the choice seems somewhat reasonable to me. I’m not 100% sure, but I think that most direct competitors (Siglent, Hantek etc.) have a very similar approach (MAX6325 or similar). If you know of an equally affordable new DMM with a better voltage reference, please let me know. I‘ll leave it at that. This is not to say that I‘m 100% impressed and would recommend to blindly buy cheap test equipment - and personally chose to go with two used 34401A. But I think it’s important to state facts and give explanations so that one can judge whether an argument is worth considering.

@SylwerDragon Месяц назад

@@sebastian_harnisch I understand.. to your findings lets say. 34401A is what i bought twice myself including some improvements i made on it and such..but that is basic of quality/design i would start with 6.5Digit. Ofc i understand cheaper you go less options you will get..but again ...As company you don't care about cheap equipment you pay a bit more for good one ..but that will last for years to come.. as individual used equipment is way to go..but there are brands you don't want to go with and UNITy is one of them but ofc choice is yours as they say :) not because they make bad equipment but because they usually make cheaper equipment with less quality/design on mind and more to price.