Exciting Tutorial: Engraving Tumblers with Precision 

I haven't tried tumblers on my F1 yet, nor have I tried full wrap. You showing how easy it is makes me want to do one now. Thanks for all your great videos. I love that you try things new on camera and sometimes have issues (just like all of us).

Thanks for sharing. I do a lot of tumblers with the rotary but have not done a full wrap yet. My issue with the RA2 is, once I took the rollers off and put the chuck attachment, it was such a pain to do, I never took chuck attachment off again. I wish it were easier to swap between the 2. If you found an easy way to swap back and forth, I'd love to see that.

I loved this video and learned so much! I just got the XTool F1 and haven't even unboxed it yet. I got the rotary attachment with it as well as the slide extension and air purifier. I can't wait. Will I be able to create this look on the F1? Thanks so much. You two are awesome.

I’ve been too scared to try tumblers. They seem so overwhelming. This is the series I needed!! Thank you!

Great video! I just received my F1 Ultra and haven't done a tumbler yet, I have done some on my F1 and used the method of running the blue laser on the first pass then the IR on the second and using the chuck and no issues with it not running the same area on the second pass.

My wife and I just set up our xtool P2 and just started exploring and learning how to use it. We've been experimenting with wood so we haven't even explored the use of the rotary tool yet.

I've done sublimation tumblers and just bought the F1. I'm excited to start working on tumblers with the F1. I have the chuck and just want to do as much research before I do my first tumbler.

I keep going back and forth between the F1 and the ultra. This video helps. Keep up the good work.

I made my first tumbler on my P2 last month. These could be addictive!!!! Thanks for sharing your video!

I haven’t tried out my RA Pro yet. Looking forward to getting some tumblers to test. Thanks for showing us how it’s done!

I only have a Cricut right now. Watching you guys to determine what laser to get.

Nice very nice. Glad I found your youtube channel . Now I want to try doing a full warp tumbler.....

I love the things you do. I've learned so much about the tools I have from watching your videos. The Ultra will be on my doorstep this afternoon. I'm sooooo excited and tonight...we laser

Just got my first xtool and have done lots of wooden projects but have not done any Rotary tool projects. Looking forward to doing some. I watch all your vids and learn lots from them. Thanks so much

Great job. Can’t wait to see the jewelry attachment and what other ideas ya’ll come up with using the rotary.

Love your videos. I'm doing full wrap and adding a name somewhere in the design. I'm looking forward to seeing how you make your full wrap designs.

I haven’t tried tumblers yet because I was seeing so many people have issues with doing a full wrap! Definitely looking forward to next week’s video to see how you design it!!

Just started trying these on my F1 and the P2. Used the roller once and the chuck twice so far. The roller worked well on a non tapered tumbler, but I think I prefer the chuck as well. Thanks for the videos!

I love doing these. So fun to watch come to life.

Very informative and 😎 I have worked with resin however after watching y'all's videos I'm looking at lasers 🎉 thank you for sharing your knowledge and love for engraving❤ ❤❤

I have the rotary to tool but haven't tried it yet with my P2. Thanks for the encouragement.

I’ve only engraved rings using the rotary. Will now have to set up to engrave tumblers. Thanks!

I am so glad to see you do this. I have a large laser with a rotary and have not even wanted to try it. Looking forward to your next video on designing a tumbler. Love your videos!

Haven't tried a tumbler yet but have the rotary and need to try one.

I love your Demo’s. I am deciding on an x tool machine, and your projects really spark my imagination and help me decide which options I will need.

Love the tutorial! I don't have a laser engraver yet, but hope to get one soon for the right price. I have been buying supplies, though 😊 I am very interested in using the rotary attachment. Love you guys ❤❤

I’ve just done single designs. Haven’t tried a full wrap one yet. Not sure how to set it up. But I’ll be watching for your video on how to set one up. Thxs for your videos

Thanks for all your videos. Very informative. I like using the chuck rather than the rollers.

We have the rotary with our F1 but haven’t had a chance to play with it yet. That fiber looks cool! Love the larger size!

Looking forward to doing full wraps and tumblers in general when my Ultra arrives next week! Great video!

I do tumblers with resin but one of my grandsons wants a laser to start an online business...so Memaw will be learning how to laser!! LOL

Love the tumblers. Just got my F1 ultra and anxious to try my hand!

I love doing tumblers on my F1

I laser engrave with the P2 using the chuck on there. I purchased a 3D made screw on from Etsy. I would love to try on F1 now but chicken too until I saw your video today. Thanks for all you do. I appreciate your expertise & humor.

Love using the Rotary! Bought the accessory kit as well. Comes with locators and laser for center.

I use my F1 and the chuck. Very cool things we did and I was able to figure out how to make the engraving color to be Black!! So so cool.....Thanks K & G!!

We're just doing sublimation and sometimes resin. Want and need to do engraving. We have all we need. Just need to do it. Great video! 🎉

Full wrap tumblers are the best! Love my xTool S1 and F1 Ultra! Thanks for doing this informative videos! Love you guys!

I have a rotary but haven’t used it yet!! This makes me want to go to the shop & try!!

Thanks so much for all you do. Your videos are so informative and I've learned so much! Can't wait til we can add a Fiber to our shop!

Love It!!! Just tried on rotary on my F1 this week for the first time. Can't wait to try a full wrap tumbler.

Nice demo. My Ultra comes Tuesday. I wish I could use my rotary from D1 one. Lol thank you for the information.

Hey Guys, I love watching you guys, I sublimate my tumblers (very easy) I recently purchased the WeCreat and have lasered a few( also pretty straightforward) My next adventure is the XTool M1 ultra... Really excited and hope to see videos from you on it as well. Thank you for all you do to help fellow crafters. God bless

Nice job!! Just started with the F1 ultra. I’m new to engraving and have yet to do my first tumbler, but can’t wait. I will be using the chuck system.

YES!! Right now I use resin on my tumblers, but I just received my rotary tool, can't wait to try engraving.

I love the way you are together! I sublimate my tumblers, I haven't tried engraving yet, maybe some day.

I love watching everything you do. I’ve learned a lot from watching you.. Thanks for all you do..

I've only used my s1 for tumblers so far. Got the ultra and need to reorganize the craft room for better efficiency and multiple laser use! Tip you can out the chuck jaws IN the tumbler I found that holds much better!!! (for me at least)

Have done sublimation and resin just getting started with doing tumblers with p2 and f1

I can't wait to start making items like this. I'm new to lasering, so everything is new for me. Great job. Good info as well!

Have you tried the chuck jaws inside the tumbler instead of on the outside edge?

WOW!!! Not bad on the time! VERY NICE!!!!!

Very cool tumblers!

Thanks for the video! Do you have the M1 Ultra? I just got my M1 Ultra and rotary tool! Excited to learn!

Love what you guys do! Very informative wishing you much more success

Can't wait to try them out

I've only done one full wrap but did do 16 32 oz front and back engravings. I also do epoxy and sublimation cups. Love your videos!

Mind blown, we just got the X tool D1 pro and the tumbler attachment, haven't used yet, but would love the tumblers, guys.

I have only used my rotary chuck once. It turned out great but was a little nerve-racking, wondering if it would work!

I bought the rotary tool but have not used it yet! I can’t wait to try it.

I always learn new techniques from your videos! Keep up the good work!!

Just unboxed my F1 Ultra and filter system! I'm (almost) too scared to plug it in, what if I screw something up? :) I am no expert, just a beginner and it just looks like fun.. I'm old and bored! Thanks for posting this tumbler vid, those are on my learning list! You should do a vid on where to find those files for wrapping! Other than RU-vid, I know not where to start.😉

We are doing ours with a chuck. The chuck makes it easier to change tumblers of different sizes.

Great video, you guys make it look so easy.

enjoyed the video, I use my RA2 chuck with my Xtool D1 when making tumblers

I am sublimating my Tumblers but the engraving looks AWESOME 🤩

Love this wrap! Can’t wait to try the roller on my laser. 🎉❤

Thank you for sharing now I think I can do it!

nice did you do the second pass on the chucked tumbler? why did you cut the video at the most important part at the end of the engrave or the start of the 2nd engrave.. its time to be more transparent

I use the chuck on my d1 pro. Love military themes and working on full wraps now!

This looks so sweet and easy!

Hi K&G!! I haven't done any tumblers yet. But I want to someday. I want to try laser and Resin coating. Good luck everyone!

My Ultra is FINALLY on the way. The RA2 arrived today... what a tease. Everything else comes some time next week.

I did tumblers for my team at Circle K.

Waiting for the F1 ultra to arrive next week. I have used the rotary tool with the chuck seems to work better for me. Try some full wraps soon! I have just did it on my D1 pro have to try on the P2 as well

Christina and I are expecting our 50 lbs of joy (F1 Ultra) to arrive today by the UPS stork. We don’t have a rotary yet for it but would be an excellent addition one day I know. That makes little brother Xtool Laserbox, big big brother 130watt Omtech and now the middle brother Ultra. The family is growing…

I have a Xtool F1 and have used the rotary chuck twice on tumblers. They were not full wraps. I’m looking forward to your video next week on how to design full wraps!

Thanks for sharing. Inspriation to try the xtool tumbler attachment I bought. Thank you.

I am still using a glowforge, and I wish it had the options of the xTool. After watching everything the F1 can do it will be my next investment because I really want to do tumblers.

awesome great tips can't wait to try

I use the RA2 Pro as well. I usually do just 2 opposite sides. I haven’t had the courage to do a full wrap yet.😬

I haven't engraved a tumbler (YET). I an waiting for RA2 cable for the F1 ultra to be delivered. But I have laser engraved a couple metal flasks. Can't wait to see your Military ones.

I have an Omtech and would love a tumbler to try.

I have only used laser on black flasks so far. Still haven't taken the rotary tool out of the box for tumblers. But I have a few ideas brewing for a Chrismas Cup! Keep up the good work, I'm loving the different projects!!!

Love, love, love this feature on the F1 Ultra!! Would love to be able to try it out! That's a lot of love in these comments....lol😅!

I use my p2 and they have turned out great most of the time

I just started trying to do tumblers on my Xtool F1

Im just in the trial process kinda afraid to do a full wrap cuz them tumblers are expensive to waste😂But I may try them again since u made them look so easy❤.Love ur videos and always so easy to follow😊

I use a diode laser. I just added an inexpensive co2 laser that I haven’t tried with the rotary axis yet. I am excited to learn how to make a full wrap design next week!

This makes me want to get my Rotary going. I've been putting it off but I haven't had the courage to do it.

We have not got into tumblers just yet. Still trying to master the signs.

What tumblers did you use? Normally do sublimation for my wraps but very interested in using a laser. Glad to see you make mistakes as some of the videos it seems everything comes out perfectly. Gear drive on the chuck will always be better and more accurate than the rollers because as you said things can slip on the roller and you might not notice. Very important if you have to make more than one pass.

those are some foxy full wraps that would do on my F1 with a chuck as roller walking is a pain as I like a second ir pass to clean it up!

Looks awesome!

Can we engrave on the inside of a ring?

Omgoodness these are great!! 😊

I have the rotary tool but have not tried it yet. Want to do so soon

Great video! We have an F1 and the rotary tool, just no tumblers.

I use WeCreat and Epoxy... I do it all my friends. By the way I love that you two share your knowledge with us!!

If you use the chuck it won't skip like that. On the rollers it won't line up for the second pass