Expanding the Mother with Eurorack | Mother-32 Tutorial - Part 13

Подписаться 8 тыс.

Просмотров 2,7 тыс.

50% 1

In this video, we're going to go through some ideas for expanding the sound studio into Eurorack!
If you like this series - check out my other tutorials on the Subharmonicon and the DFAM
➜ • Part 1 - Introduction ...
➜ • Part 1 - Introduction ...
Perfect Circuit Affiliate Link:
➜link.perfectcircuit.com/t/v1/...
I have patchbooks and other downloads available on my Patreon Page. These are offered as a Thank You to supporters of my channel - I truly appreciate your support.
Patreon:
➜ / braintree56
If you’d like to support my page without joining patreon, please visit the affiliate links below. If you click through these links and shop around, I’ll get a small commission on anything you buy. It’s a great way to tip me at no additional cost to you.
Make sure to follow me on Instagram!
➜ / braintree56music
The Moog Mother-32 is an intuitive and expandable semi-modular synthesizer that adds raw analog sound, powerful sequencing and extensive interconnectivity to any creative, electronic or modular ecosystem.
#moog
#mother32
#moogsoundstudio
#modularsynth
#eurorack
#electronicmusic
#synth

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@dariuszickus3999 3 месяца назад

Following your series on expanding Moog Sound Studio to Eurorack, which can be a daunting experience. I had to calibrate my M32s VCO to get an acceptable External CV 1V/Oct pitch tracking. Apparently, this is a known issue with M32. So, just wanted to give a heads-up to anyone who's planning on using an external CV sequencer. Manual discourages users from attempting VCO calibration, but my unit was way off and the procedure is quite straightforward. Thanks for your videos, very helpful.

@InvertedPopesMusic Год назад

Great video. Again learnt stuff I had not realised I could do. Agree what you say about Maths but it is awesome. Defo looking at the Cumulus as a next buy. Look forward to more.

@braintree56 Год назад

Glad you enjoyed it

@ahmedabdelaziz1298 Год назад

you are amazing my brother you helped me a lot . THANK YOU SO MUCH

@braintree56 Год назад

Thanks!!

@draconianrhythms Год назад

Very enjoyable 🙏

@braintree56 Год назад

Many thanks

@draconianrhythms Год назад

When trying to tune my M32 with Plaits (or any other MI voice), I find I get better results using the Mother for fine tuning; their frequency pots are so silky smooth, and accurate. Mutable frequency pots are much harder to dial in perfectly. Just in my own experience.

@GeorgeLocke Год назад

Mutable is also quantized to semitones, isn't it?

@braintree56 Год назад

I don't think it's quantized... But I'm reading now that there might be a hidden setting. Interesting. I'll have to do some experimenting. Thanks!

@GeorgeLocke Год назад

@@braintree56 i think the pitch knob is quantized but not response to v/oct

@davide88rn 11 дней назад

Can I ask you about the volume knob? When outputting via the 1/4 jack into an interface or mixer I got a lot of volume and sometimes I hear some loud clicks with particular patching. Is it possible that is too much for the input of maybe the mix of the patches creates some click audible only when the volume is dimed and usually in lower octaves

@harryyes1527 Год назад

I have another question for you if you don't mind, and apologies if this is totally obvious. So from your videos i have discovered that you can take the lfo out, feed in back into the ext audio, turn the LFO rate up, giving you another oscillator in theory and then use the mix nob to blend in the two. So in that case am i able to take that lfo oscillator out of the mother and run it through another filter and into a seperate mixing channel giving me in theory two oscillators? Another thought i had, is if i feed one of the VCO out into the multi, is it possible to split it into two seperate waveforms thus creating 2 oscillators? I feel like this is almost definitely going to be no but its been in my mind all day. Just trying to get my head around all this modular stuff!

@braintree56 Год назад

Sorry I missed this... Yeah, those are all good thoughts. You could feed the VCO into the mult - it's a buffered multiplier so it should be suitable for audio. Now, it would be an exact copy, not an independent waveform. But you could run it through some separate filters and things like that. (I haven't actually tried this, but I can't imagine why you couldn't!!!) This is totally the kind of creative thinking that makes modular so much fun!!!! :)

@GeorgeLocke Год назад

I'd be interested to hear your opinion on the opposite: why would I want an M32 if I already have some eurorack kit? What does it bring?

@braintree56 Год назад

That's actually a really good question! Here's my take. It all comes down to value. The mother is like a whole bunch of good modules wrapped up in a package. Osc, Filter, Envelope, LFO, a handful of utilities including S+H, and a sequencer... If you were to buy those separately, you would pay much more. But... If you have a ton of eurorack, it might just be better to have separate modules... That's my take.

@nxn-analogxanalog5739 Год назад

I see it from the other side: M32 is a great entry into (semi-)modular systems, since you get some basic modules (osc, filter, envelope, vca, sequencer) with patching capabilities. At least for me, this was the starting point 😊. If I had first invested into a „pure“ modular system, I‘d probably rather go for the Behringer system 35 modules than for M32 to get some Moog flavour.