Experts Guide to Air Bag Computer Reset Procedure

Подписаться 61 тыс.

Просмотров 17 тыс.

50% 1

In this video i show air bag computer reset how its done or airbag module cloning copy and paste is done.
airbag module coding from original air bag computer to a good donor air bag computer.
airbag computer reset is done when the vehicle was in a crash and you want to reset it to a good pre accident state. air bag computer clone is done when you have bad module flooded or physically bad you can copy vin and all original coding.
This video will guide you through the air bag computer reset procedure, an essential skill for anyone dealing with airbag module programming or repair. Learn how to use an airbag module crash data reset tool and clone an airbag module with this expert guide. Don't let a faulty air bag computer slow you down, watch this video now to learn how to reset and program it like a pro!
Original airbag module flooded?
Installed a good donor airbag module with same part number airbag light is on?
Replaced airbag module wrong configuration or coding codes?
Airbag module shorted out?
enjoy
if you need this service to clone or reset visit karmanauto.com

Хобби

Опубликовано:

17 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@electronic7979 2 года назад

Nice repair video

@DzebisA Год назад

Can you tell us what instruments do we need? I can say that this video is Soo good,if I had everything like u I can do same,but 1st I wanna know what do I need,what cable,what program do I need to start

@naseemahmed4382 Год назад

Nice video plz keep make more videos like that

@swarajjoye Год назад

Hi great video. Quick question, I can read the EEPROM once but fail to verify. Keep coming back as verification fails. Clamp eeprom on pcb. Is it a bad connection?

@yiannakosautomotivekeys2380 Год назад

Hi. What happens when you lose the original eeprom? Is there a way to modify the eeprom file from the new module? Great work by the way. Please keep them videos coming. Much appreciate you.

@davidwinters1189 5 месяцев назад

Do you still work on the little boxes for their air bags?

@methosa8818 Год назад

Audi/VW use similar Bosch airbag control modules. There is a concept of index number; which basically maps to the number of sensors/airbags in the vehicle. Usually each model has anywhere between 3-12 different index numbers. For example, airbag control module 1K0909605AB has index codes 6A and 39. Are the differences between these modules in the eeprom or in firmware? If they are in eeprom; I imagine a scenario where you could dump the contents of 6A and flash it to 39 and for all intents and purposes 39 becomes 6A. If the firmware itself is different; this method would probably not work.

@nasqad3357 6 месяцев назад

Hey mate, just a quick question couldn’t you just transfer the EEPROM chip to the new donor module from the old one?

@dodynboy 10 месяцев назад

What program do you use to clear the EPROM?

@tariqhusham1576 Год назад

I just see your replay to another comment. so the question now ,when is your next course will be? thank you

@mkfourgli1 2 года назад

where are you located? can you code out sai egr and such systems on a vw

@SamandShiba8860 10 месяцев назад

What if the chip is burned, do i need a new module and where do i get one that affordable and will the it work with the other gaget or is there more reprogram

@tariqhusham1576 Год назад

good day sir. do you give course about repair airbag modules? Thank you

@jamesward5721 Год назад

Ok - so question. You had to remove the eprom regardless - so why bother doing read/write when you're swapping the chip anyway? @splain pls. :-) Eprom swap would do the same thing, no?

@faustovalerio8434 2 года назад

I found you on RU-vid. I am wondering if you can program my ignition switch for 2018 Mercedes.

@rennmotorsllc9787 2 года назад

2018 ignition switch is a FBS4 component, which has a high security system. Only new component and has to be done online with Xentry.

@paulobrien226 Год назад

would pin no1 not be on the bottom left and not the top left as marked

@peterfoster4025 Месяц назад

Miss understood I’ll explain I have a bad module I bought a new module they are vin for certain car so if I use my mcu with my vin in it can I just swap put in new module without doing am I clone with car pro programmer

@vehix411 Месяц назад

For German cars no need to clone

@dvveloza 4 месяца назад

Great video. I have 2023 Corolla with the airbag light on and no codes. I sent the module to get reset and I just got it back and installed it and the light still on… wtf!!! Any ideas on what else to look for?

@devilmonkey 3 месяца назад

You probably still have a fault or didn't fix everything. If it was in a crash and the seat belts are locked up, gotta change them. A proper scan tool could tell you exactly what codes are still there