Тёмный

Extension Build 2024 | The Times They Are A-Changin' 

Skill Builder
Подписаться 611 тыс.
Просмотров 101 тыс.
50% 1

Special thanks to Surrey Bespoke Construction
www.surreybespoke.co.uk
Tel: 01737 448101
___________________________
Extension Build 2024 | The Times They Are A-Changin'
In 2024, the United Kingdom saw significant changes in its building regulations, marking a pivotal shift towards more sustainable, energy-efficient construction practices. These changes come as part of the government's broader initiative to tackle climate change and reduce the country's carbon footprint, which aligns with the UK's commitment to achieving net-zero carbon emissions by 2050.
The amendments to the building regulations affect various aspects of construction and renovation, from residential to commercial projects, aiming to enhance energy efficiency, improve safety standards, and foster innovation in building design.
Enhanced Energy Efficiency Standards
One of the most notable changes in the 2024 building regulations is the introduction of stricter energy efficiency standards. The government has significantly raised the bar for the minimum energy performance of new buildings, requiring them to be nearly zero-energy buildings (NZEBs). This means that new constructions must utilize renewable energy sources to a large extent, significantly reducing reliance on fossil fuels. For existing buildings undergoing major renovations, the regulations mandate improvements that substantially increase their energy efficiency, aligning them more closely with the standards set for new buildings.
Focus on Sustainable Materials and Construction Methods
The revised regulations also strongly emphasise the use of sustainable materials and construction methods. Builders and developers are encouraged to employ less environmentally-impact materials, such as recycled or sustainably sourced products. The new guidelines also favour construction methods that minimize waste and reduce carbon emissions. This shift not only aids in reducing the construction industry's carbon footprint but also promotes circular economy principles within the sector.
Improved Safety Measures
In the wake of various high-profile building safety incidents, the 2024 amendments have introduced more rigorous safety standards, particularly in relation to fire safety and structural integrity. The regulations now include more stringent fire detection and suppression systems requirements in both new and existing buildings. There is also a greater emphasis on buildings' structural resilience to withstand natural disasters, reflecting a proactive approach to ensuring the safety and well-being of occupants.
Innovation in Building Design
The latest revisions to the building regulations encourage innovation in building design, especially in integrating smart technologies. Smart energy systems, which allow for more efficient management of energy consumption, are now becoming a standard feature in new buildings. Additionally, there is a push for designs that enhance natural light and ventilation, further contributing to energy efficiency and creating healthier, more comfortable indoor environments.
Implementation and Compliance
The government has introduced more rigorous inspection and certification processes to ensure compliance with the updated regulations. Building projects must now undergo more comprehensive assessments at various stages of construction, ensuring that they meet the new standards. Non-compliance can result in significant penalties, underscoring the government's commitment to enforcing these changes.
The 2024 changes to the UK's building regulations represent a significant step forward in the country's journey towards sustainability and environmental responsibility. By setting higher standards for energy efficiency, promoting the use of sustainable materials, improving safety measures, and encouraging innovation, these amendments aim to transform the construction industry. As the UK continues to face the challenges of climate change, these regulatory updates underscore the critical role of the built environment in achieving a more sustainable future.
==========================================
#extensions #building #construction
📪 Newsletter: skill-builder.uk/signup
/ skillbuilder
/ skillbuilderchannel
/ skill_builder
/ skillbuilderuk
🔗 Skill Builder Link Tree: linktr.ee/skillbuilder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 Video library: ru-vid.com...
💧 We Support Charity Water: www.charitywater.org
◾ Out of respect to our sponsors and followers, we'll remove comments that do not follow expected standards of politeness and decency.

Опубликовано:

 

8 апр 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 235   
@dannyshennan7810
@dannyshennan7810 Месяц назад
Get the feeling they really didn't want Roger there 😂
@Jonathan_Doe_
@Jonathan_Doe_ Месяц назад
@@user-tx6ii9pm4dThey’re using a breathable type of insulation so the air gap isn’t really necessary.
@noskills9577
@noskills9577 Месяц назад
Came here to see what the internet experts were slagging off, best they could do is tracksuits - must be a good build
@zorot3876
@zorot3876 Месяц назад
Yeah but the guy who drilled the holes for the three pipes should be sacked.
@Simonsimps
@Simonsimps Месяц назад
@@zorot3876 He did the brickwork under the padstone too 😁
@olivergoodwin1348
@olivergoodwin1348 Месяц назад
@@user-tx6ii9pm4dwhen using that type of insulation how would you keep an air gap and prevent it from touching the outer skin?
@TheToolnut
@TheToolnut Месяц назад
​@@zorot3876Agreed that was the only red flag I spotted, 🙄
@TheToolnut
@TheToolnut Месяц назад
​@@olivergoodwin1348Personally I would be using Kingspan.
@josephrooney7205
@josephrooney7205 Месяц назад
We built 125mm cavity with 75mm pir and 50mm clear cavity up until this year. New regulations are now 90mm pir with 50mm clear cavity. Never liked rock wool don’t like the idea of soaking wet rock wool in my cavity’s. It’s obviously a lot easier to fit than pir but pir is far superior and less chance of damp issues in the future. A cavity should be a cavity especially on brickwork imo.
@gingerelvis
@gingerelvis Месяц назад
Very clean and tidy workers for the challenging conditions we have had lately, that site looks a bit tight on access too.
@CJ-gn8qm
@CJ-gn8qm Месяц назад
Watching craftsmen in full flow is a beautiful thing. My father was a time served brick layer and later a general builder, though went into engineering I still appreciate the skill he had!
@jayseabie215
@jayseabie215 Месяц назад
Only trouble with larger cavities is either you get a smaller internal area or you'll have to build out more to get the same inside space as previously.
@sucofnisucofni8935
@sucofnisucofni8935 Месяц назад
I worked on a bungalow construction that was 9in blocks laid flat with kingspan rendered with epoxy. The block work became one big heat store and extremely cheap to heat
@laurencetayloruk
@laurencetayloruk Месяц назад
Full fill cavities are the next ticking timebomb in construction. Give it 15 years all the insulation will be wet and rotten. It's been proven that wind driven rain gets through your brickwork whatever you do. Cavities are there for a reason! I build with blockwork-insulation-50mm cavity-brickwork. Yeah you lose 2 inches but the building will last 100 years
@oddjobtriumph1635
@oddjobtriumph1635 Месяц назад
exactly
@TheToolnut
@TheToolnut Месяц назад
That's tasty work, the scaffolding is a masterpiece especially with the roof on top of it. The only red flag i spotted was the plumbing, the joists should be drilled in the center along the neutral axis. Holes to be kept as small as possible with an allowance for expansion.
@Wgnwtb
@Wgnwtb Месяц назад
I’m curious what makes it good scaffolding please
@TheToolnut
@TheToolnut Месяц назад
@@Wgnwtb The roof on it, you'd never see that in Ireland. Paddy's too tight to pay for it! 🙄
@Wgnwtb
@Wgnwtb Месяц назад
@@TheToolnut lol thank you)
@nectafarious8842
@nectafarious8842 Месяц назад
Pipes should have gone in before the Caberdeck was glued down. Plumbers would have been cursing. Builders probably thought Hep2o was going in.
@TheToolnut
@TheToolnut Месяц назад
@@nectafarious8842 You'd still have been able to drill through the centre of the joists from below.
@patrickjoneill5836
@patrickjoneill5836 Месяц назад
Great to see skilled English craftsmen doing a decent job.
@djhago3123
@djhago3123 Месяц назад
Im using 125 and 150 xtratherm pir cavity fill with the plastic front... and if its pumped walls they want 200mm cavity... in Ireland we don't really use the rockwool version for cavities
@1966uk123
@1966uk123 Месяц назад
All you need is 100 mm cavity 60 mm insulation and 40mm air flow result is your never get damp or mould, period..
@person8203
@person8203 19 дней назад
yea, but buiding regs are over the top
@mattg4321
@mattg4321 Месяц назад
Don’t think much of plumber and sparks on this job. Those holes through joists at the end all in the wrong places. Cables also out of safe zone where they dive round the steel. Wouldn’t have them working in my place!
@sygad1
@sygad1 Месяц назад
I was thinking the same thing about the holes in the joists
@hunterb9273
@hunterb9273 Месяц назад
Yep those pipes where shocking bad.
@MrCADCHANNEL
@MrCADCHANNEL Месяц назад
Good informative RU-vid video as usual RB. With regards to thermal cavity wall insulation, I’ve never favoured AIRCRETE bl’wk being used to improve thermal values, as the inner cavity wall leaf is really for load bearing requirements from floor & roof loads & certain beams/lintels etc. Therefore, a dense aggregate block will tend to perform better structurally than AIRCRETE block & with all the inherent fixing issues to AIRCRETE. As for the insulation full fill within the cavity with face brickwork outer leaf, a waterproof insulant rather than a water resistant/repellent additive material should be a consideration, the cost difference shouldn't be that much higher. Also over time, a mineral wool type product could slump within the cavity compared with a rigid T+G board. A basic thermal calc will identify the cavity width required & what type of insulation board to achieve the current elemental U-value, this being 0.18W/m²K for outer walls. The example below achieves this with dense bl'wk & a 10mm residual cavity using this type of quality insulation, i.e. 125mm o/a cavity. Water ingress from driving rain could bridge a full fill insulated cavity with certain brick types, even small imperfections, so any residual cavity will assist, I guess everyone has their preferred methods :-) Rsi 1 15 0.180 0.083 Gyproc Wallboard 12.5mm+skim 2 15 R-value 0.170 Drylining - plaster dab cavity 3 100 1.080 0.093 MasterDenz (agg1960) Internal 4 10 R-value 0.290 Cavity unventilated low-E (0.2) 5 115 R-value 5.200 Recticel Eurowall+ 6 103 0.840 0.123 Brick outer leaf Rse 0.040 ----------------------------------------------------------------------------------------- U-value (rounded) 0.18 W/m²K -----------------------------------------------------------------------------------------
@bilvis1985
@bilvis1985 Месяц назад
Chasing out the cavity in the existing wall is new regs to stop thermal bridging. Had this discussion with my BCO.
@davejohnston5158
@davejohnston5158 Месяц назад
Existing cavity wall needs a vertical cut where the new wall meets it. Try doing that once youve built the new extension. Could be enforced by building control. Brickwork otherwise looks tidy.
@SkillBuilder
@SkillBuilder Месяц назад
Not required. The cut can weaken the corner
@TheGweems
@TheGweems Месяц назад
Cut is only in the outer skin for installation of vertical dpc. Ideally insulated if you want to avoid cold bridging. The structural skin is unaffected if an engineer requests it you can always install remedial wall ties for stiffness before you make the cut.
@Ironbuket
@Ironbuket Месяц назад
2:14 Does the cavity have to be 150, or it just has to be that unless you use the more expensive 90 type? Your room could be 12cm bigger if you use the more expensive insulation?
@fireblaster9961
@fireblaster9961 Месяц назад
It makes sense that they want bigger cavity’s considering most older houses are having thick insulation blocks glued on to the outer brick work
@brindlesmally6244
@brindlesmally6244 Месяц назад
And then having damp problems because wall can't breathe
@SteveAndAlexBuild
@SteveAndAlexBuild Месяц назад
Nice . That Tin hat was a massive help 🧱👍🏽🌧️🌧️💦
@andyd747
@andyd747 Месяц назад
I’m after a porch built in Merseyside, any chance of a quote?
@kevinhopkins8355
@kevinhopkins8355 Месяц назад
No cutting into the existing wall to continue the cavity or vertical damp ..?..
@SkillBuilder
@SkillBuilder Месяц назад
It is not always required. It is better to keep the strength in the corner
@leggbuildingdorchester6234
@leggbuildingdorchester6234 Месяц назад
Surely that would create a bridge?
@charliebass9238
@charliebass9238 Месяц назад
Great video Roger, looking good 👍
@user-qt6do4qh9f
@user-qt6do4qh9f Месяц назад
150mm drytherm cavity insulation. Amzing difference. Builders were complaining "insulation doesn't make any difference anyway". I said to them, when its cold do you wear a coat?.....silence.
@wibblywobbly1234
@wibblywobbly1234 Месяц назад
In the future, houses will be made entirely from insulation
@Crogookah
@Crogookah Месяц назад
SIP is the future... Or present 😂
@martin2466
@martin2466 Месяц назад
@@Crogookah Certainly one way to go. And S.I.P`s is good. I have done "Passive-Haus" and "Huf -House" triple glazed windows, air-tight structure with MHVRS Now that is the way to go.............
@johndavenport7281
@johndavenport7281 Месяц назад
My woodwork teacher told us that the adhesive was stronger than the actual timber members being joined together. I can still remember the look he gave me when I asked "Why don't we make furniture out of adhesive then?". With heating bills at current levels I'm beginning to think I'll have to move into a new spec home and leave our 150 year old stonebuilt cottage behind. There's a limit to how much roof insulation, double glazing etc. can do when there are 2ft thick walls soaking up interior heating.
@PaulSmith-pr7pv
@PaulSmith-pr7pv Месяц назад
They’re called bricks 😂
@martin2466
@martin2466 Месяц назад
@@johndavenport7281 I built the house we currently live in. The walls are a insulated/composite timber system with brick rain screen cladding. Triple glazed windows on west/North and East elevations. High levels of insulation to sub floor/ loft and intermediate floors. almost fully sealed with an internal ventilation and recovery system. U - values achieved easily far exceed current required standards and E.P.C =A* rated. It is the only way to go.....
@64gorrilla
@64gorrilla Месяц назад
Is quiet floors to joists now not required?
@ebebop
@ebebop Месяц назад
Use 90mm pir board and keep the 100mm cavity.
@MrClem877
@MrClem877 Месяц назад
Are those wall ties long enough for a 150 cavity ?
@Joe74854
@Joe74854 Месяц назад
I put 10 mm pea shingle around my crates on a soakaway also 100 mm under the crates
@lightx500
@lightx500 Месяц назад
2:25 150 cavity for the wool insulation if you use PIR still under 100
@18199
@18199 Месяц назад
3:55
@jonp6798
@jonp6798 Месяц назад
I had to do my own calcs to convince BC I could use 100mm PIR on a garage conversion. What a menace.
@ck008uk
@ck008uk Месяц назад
I went through this recently where our architect/engineer had given specs according to old building regs. Since we had already built the walls up to damp level, I also had to switch to the special PIR tongue & groove insulation boards which probably doubled the cost on insulation. However, (based on calculations) it overachieved the required level. The bricklayers (from Moldova) did an awesome job even though it wasn't an easy job.
@ck008uk
@ck008uk Месяц назад
@@jonp6798 If you live in a weather-sheltered area, filling 100mm with normal PIR is probably accepted. I live in a sheltered area as well. But I thought of sticking to 10-20mm air gap between the PIR and the external wall while using 90mm tongue and groove PIR boards (even though they are freaking expensive) to stay out of trouble from building control. They say that rain penetration can happen across joints unless they are tongue & groove style boards. Not sure if it has been proven or utter BS for selling something at a higher price.
@simonashworth2820
@simonashworth2820 Месяц назад
Celotex Thermaclass 21 is a full fill rigid insulation that meets current u-values and is 100 mm thick installed in a 100 mm cavity
@andyarchitect
@andyarchitect Месяц назад
I'm always surprised that many trades are unaware of the rules regarding drilling and notching joists. The ones for the copper pipes caught my eye. Keep your holes for services in the middle of the joist and keep the hole size to a minimum. If you are drilling or cutting into any structural element as part of your work you need to be aware of the implications of what you are doing and what is acceptable... especially if its a task you are doing on a daily basis. Sometimes people wonder why floors of old properties are bouncy and when you lift the floor boards and see how many holes and notches have been added to the joist over the years, both top and bottom, then you realise the joist has lost almost a 3rd of its structural depth.
@SkillBuilder
@SkillBuilder Месяц назад
That is all in the existing buildimg. You won't thread copper through the middle of the joists.
@stephen-boddy
@stephen-boddy Месяц назад
@@SkillBuilder Sorry, but 8:22 is definitely _not_ in the existing building, and there are three copper pipes with _huge_ holes through every joist. Those holes look to break several of the LABC/NHBC guidance. (Not on joist center-line, holes not spaced 3x diameter center-to-center, holes too close to supporting wall -
@njh8277
@njh8277 Месяц назад
@@stephen-boddy You've just BUSED skillbuilder
@beijingbond
@beijingbond Месяц назад
Masters at work.....we love these videos, Roger.
@Jackzuk
@Jackzuk Месяц назад
U should do an eps on SIPS… there a new build art deco style house built out of SIPS with curved walls and everything, would never know its SIPS. Look amazing!!
@martin2466
@martin2466 Месяц назад
S.I.P`s is one of the ways to go for mass market construction.
@frankcaratti
@frankcaratti Месяц назад
@@martin2466 what's s.i.p? Ive never heard of it
@lo0ops
@lo0ops Месяц назад
Nice edit and post.
@JulianCoogan-zl1ru
@JulianCoogan-zl1ru Месяц назад
Nice video!
@RS-ei3yt
@RS-ei3yt Месяц назад
Qq..my neighbours ground is 350mm higher than mine. The external wall cavity tray will still need to be 150mm above it. Should insulation go beneath the cavity tray too…?
@jackrussell9811
@jackrussell9811 Месяц назад
bigger cavities = smaller internal areas
@gdfggggg
@gdfggggg Месяц назад
Warmer though. Cheaper on the bills.
@Dale-11
@Dale-11 Месяц назад
You can't afford to lose an extra 2inc can ya pal? 🍆
@mich29sm
@mich29sm Месяц назад
Not many cares, as long as houses are shown on the market with a description of how many bedrooms, instead of square meters, like the rest of the world.
@mich29sm
@mich29sm Месяц назад
New, thick insulation and still metal rod as thermal bridges. Someone has to start thinking.
@petergrice76
@petergrice76 Месяц назад
Love to see good skilled builders especially brickies. In my day, most would cheat and lay the bricks with 'frogs' down. Nice work.
@eleycki
@eleycki Месяц назад
Why do you bring up the brick leaf first? I have only ever seen the inner leaf leading?
@SkillBuilder
@SkillBuilder Месяц назад
you can do either but most of the time you should bring them up together
@SB-dg8hq
@SB-dg8hq Месяц назад
Are those wall ties long enough?
@p1ggyw1g
@p1ggyw1g Месяц назад
How would you deal with the stepped out brick courses if at a later date you wanted to add External Wall Insulation ?
@SkillBuilder
@SkillBuilder Месяц назад
You just cut the insulation around the corbel. It is done all the time
@mypointofview1111
@mypointofview1111 Месяц назад
Nice to see building regs insisting on a lot of insulation. The only trouble is that in 50 years time the insulation will have shrunk and not be so effective, will these extensions have to be filled with foam?
@davidfelton134
@davidfelton134 Месяц назад
I bought a new build with London Brick about forty years ago built with the "frog" (dimple in the brick) placed down. I noticed bricklayers in this SB vid placed the bricks frog up. That's the correct way I think as the other way caused serious problems. Face of the bricks blown out by frost particularly below DPC. They did it this way because its quicker as less mortar is needed. Funny though, the last course they laid before they went home were always frog up! lol Dave
@johndavenport7281
@johndavenport7281 Месяц назад
Upon taking off the render on our outhouse due to failure and spalled bricks I too discovered that the bricks had been laid upside down with massive air pockets in the frogs. To make matters worse they had mixed a far too strong cement mortar and render so that it was no wonder the bricks were spalling. The only time I have decided to lay bricks frog down (with filled frogs) was on the top course of a dwarf wall in a greenhouse so that the frame could be laid and sealed to an even surface. I've repointed and re-rendered with lime to improve water transmission and built a toolshed extension on the worst west facing gable to protect the outhouse. If I'd discovered similar on my house then it would need major replacement, not everything was better in the "good old days".
@davidfelton134
@davidfelton134 Месяц назад
@@johndavenport7281 Interesting John
@glassfibrespecialists.
@glassfibrespecialists. Месяц назад
They look and sound like good guys. Most of these recent insulation rules are going way over the top.
@user-qt6do4qh9f
@user-qt6do4qh9f Месяц назад
Disagree. British housing stock is old and antiquated. New builds need to be better insulated. My house has been renovated to part L regs. So, 150mm drythem cavity.in the walls.etc.... Barely needs heating and keeps a far more constant temperature, so comfortable.
@themaltsters
@themaltsters Месяц назад
The people making the rules haven't got to pay for the materials
@BsktImp
@BsktImp Месяц назад
06:48 Is that a bit wonky or do I need a new visual cortex?
@nectafarious8842
@nectafarious8842 Месяц назад
It's the angle of the dangle...
@rogercurtis8270
@rogercurtis8270 Месяц назад
Why are they not installing dry-fix ridge and hip tiles?
@SkillBuilder
@SkillBuilder Месяц назад
If the existing building has bedded ridges or hips you don't have to dry fix. They build to the drawing and all of it is passed by Building Control
@jeremykemp3782
@jeremykemp3782 Месяц назад
nice
@markbriggs6786
@markbriggs6786 Месяц назад
Looks as though it’s got an over hang on the corner 4 courses up that can’t be intentional can it as it does overhang along all the course unless it’s the camera angle
@nopy99
@nopy99 Месяц назад
Some of the wall ties seemed a bit short
@chunkymonkey55555
@chunkymonkey55555 Месяц назад
150 cavity? must be nice for people with a side space issue. Getting Crazy!
@chunkymonkey55555
@chunkymonkey55555 Месяц назад
@@user-tx6ii9pm4d I think the insulation regulation depth is unreasonable on an extension build myself personally. These Net Zero loons are going to destroy this country with their bs.
@leerussell8939
@leerussell8939 Месяц назад
Shouldn’t there be 4 inch kinkspan inbetween the joist before caberfloor goes down?
@SkillBuilder
@SkillBuilder Месяц назад
that is the upstairs. The insulation in that void is Rockwool for sound and fire. It is put in from below.
@darrenbooker4155
@darrenbooker4155 Месяц назад
Is this correct? The new extension bricks not lining up with the original house would kill my OCD! (7.10)
@scottlewis7893
@scottlewis7893 Месяц назад
It’s about levels ark
@pmbpmb5416
@pmbpmb5416 Месяц назад
I’m putting in 90mm is the 150 material substantially better ?
@SkillBuilder
@SkillBuilder Месяц назад
No the 90mm PUR board is the same as the 150mm mineral wool. The trouble with pur is sealing the gaps. The mineral wool is faster
@MARTINA-gc3tq
@MARTINA-gc3tq Месяц назад
Those holes through the joists for copper pipes are miles away from the centreline!
@edthompson9337
@edthompson9337 Месяц назад
Just waiting for a plasterboard screw to go through one of them, very naughty!
@SkillBuilder
@SkillBuilder Месяц назад
The plumber was left alone. The joists had to be doubled up to overcome it. Also metal plates protecting the pipes
@MARTINA-gc3tq
@MARTINA-gc3tq Месяц назад
@@SkillBuilder you mean the “plumber” was left alone. 😀
@GrandpaTig
@GrandpaTig Месяц назад
I thought the tile ridges needed to be the dry modern method?
@SkillBuilder
@SkillBuilder Месяц назад
Not on a traditional roof where you are matching existing.
@GrandpaTig
@GrandpaTig Месяц назад
@@SkillBuilder Understood - good to know for the future 👍
@RhysPearson
@RhysPearson Месяц назад
Genius bricklayers. Unfortunately couldn't get an apprenticeship so ended up in cybersecurity. Ah well....
@GoldenAdhesive
@GoldenAdhesive Месяц назад
I'm a data analyst who is DIY fully renovating my home. Funny how IT guys go back to the hard labour haha
@robertszynal4745
@robertszynal4745 Месяц назад
@@GoldenAdhesive Haha, same here. Devops Engineer that's fully renovating my future home. I guess we just love a project.
@Czechbound
@Czechbound Месяц назад
Tell us all of Roger's secrets !
@funkeybikemonkey
@funkeybikemonkey Месяц назад
They have a zig zag in the ties so drip both sides. If it is not specified that there must be an air gap and the materials are what are requested by an architect then... Seems alright to me.
@craigwelsh
@craigwelsh Месяц назад
​@GoldenAdhesive technical architect on cloud and security here who spent the weekend mitre cutting oak skirting now I've finally tiled the floor. I think after all the nonsense and computers we all like to build something practical other people can look at and understand.
@allyburg7145
@allyburg7145 Месяц назад
I prefer kingspan or celitex because it’s closed cell, I would be interested in your thoughts
@lmilne4859
@lmilne4859 Месяц назад
Tidy squad
@person8203
@person8203 19 дней назад
wall insulation regs are overkill for extensions
@leggy6234
@leggy6234 Месяц назад
The wall ties didn't look long enough to get 50mm into the blockwork.
@rumco
@rumco Месяц назад
Don't worry, they're tied to the wool :D
@ilricettario
@ilricettario Месяц назад
You could well be right.
@phooogle
@phooogle Месяц назад
It's ok, the wool is "rock" wool.
@leggy6234
@leggy6234 Месяц назад
@@rumco Wool is flexible/non-structural, the two leaf's need tying together directly.
@dannyhowarth1728
@dannyhowarth1728 Месяц назад
😂​@@leggy6234
@petemarshall7784
@petemarshall7784 Месяц назад
I was speaking to a builder the other day whos doing a extension and he said the 150 is only for new build he did cavitys in wool 100mm. has anybody actually read the exact wording of the regs. and does it depend on your area im in north yorkshire
@Jackzuk
@Jackzuk Месяц назад
My architects said it applies to extensions too and drew my plans with 150mm cavity, as said 100mm doing it with special PIR is prohibitively expensive…. However my builder said we can still do 100mm with PIR for extra £600. I would say thats reasonable and worth paying to save 3 x 50mm internal wall space, also means dont have to pay more for longer brick ties, wider lintels, cavity closers etc… from what ive heard getting 50mm longer brick ties cost 100% more than regular.
@mikejames4271
@mikejames4271 Месяц назад
Pay for a home energy survey, £280 and keep your 100mm cavities.
@SkillBuilder
@SkillBuilder Месяц назад
You can trade off by beefing up the existing to bring you up to a decent standard but the builders build what is on the drawing. The horse trading is between the architect and Building Control.
@johnwarwick4105
@johnwarwick4105 Месяц назад
That scaffolding roof must have cost a fortune 🤷‍♂️. Nice for the lads working though
@geoffnewman3109
@geoffnewman3109 Месяц назад
As the brickie said these rules are mad. We like living in freezing cold draughty buildings and spending a fortune on gas and electricity because that’s what we have always done and we are British. 🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿
@phooogle
@phooogle Месяц назад
To be honest kingspan et all is back too good prices, even so far as when I built my loft out getting on ten years ago, so I think they could go thicker with the regs.
@thomasrogers4534
@thomasrogers4534 Месяц назад
Why is it knowing the damp issues I've encountered over the years with full fill cavities albeit injected glass fibre, this goes right against the grain???
@the1beard
@the1beard Месяц назад
😯 14-inch think walls ... what next 2ft thick walls
@timstradling7764
@timstradling7764 Месяц назад
That’s what my house has, built about 1780 - cozee
@nectafarious8842
@nectafarious8842 Месяц назад
Cotswolds is now natural stone 150 on bed, 150 cavity, 100 inner skin. Try coring through that lot for your extraction ducting...
@the1beard
@the1beard Месяц назад
@@nectafarious8842 nuts
@deanchapple1
@deanchapple1 Месяц назад
There’s no way on this planet those pipes allowed to be cut in to the bottom half of the joist? Surely that’s against building regs?
@WilliamPightling
@WilliamPightling Месяц назад
They should be notched into the top of the joist closer to the bearing point, where the joist is in compression rather than below the neutral axis where the joist is in tension.
@SkillBuilder
@SkillBuilder Месяц назад
You are right Dean, you should never notch the underside or do anything past the centre line. It was the plumber let loose. The joists had to be beefed up with extra ones to get over the issue.
@johnnymetalcore5608
@johnnymetalcore5608 Месяц назад
Flip flops are the way to go 😂
@Foz1
@Foz1 Месяц назад
must cost a fortune for a little extra space. Lots of work
@SkillBuilder
@SkillBuilder Месяц назад
it is quite a bit more space with a new kitchen and cloakroom
@markmaloney5146
@markmaloney5146 Месяц назад
Why ain’t they cut a cavity, or even a saw cut in cavity of where new meets old 🤔
@SkillBuilder
@SkillBuilder Месяц назад
Because it is not required. The engineers and architects give the builder a drawing which is passed by Building Control and then the builder builds what is on the drawing. If you start cutting the cavity near a corner you have weakened the structure. If the engineer says to do it then it is their insurance that pays.
@stephenmarsh
@stephenmarsh Месяц назад
zzzzzzz what did I just fall asleep to? Not much on this week Roger!
@SkillBuilder
@SkillBuilder Месяц назад
Some weeks are fat and some are thin. It is a hard game bringing in enough stuff to keep you awake but I hope you enjoyed the snooze and woke up refreshed.
@johnswarbrick2365
@johnswarbrick2365 Месяц назад
Skills impress me - whether it is brick laying, plastering, embroidary, inlays in cabinet making, art painting etc etc NOT the size of the car you can park on the drive to impress the neighbours.
@martin2466
@martin2466 Месяц назад
I have seen 150mm, 200mm and even 300mm cavities on sites recently. What nonsense is this? This cannot be a viable way for house building to proceed into the future, and the large volumetric house builders wont view enormous cavities as economical into the future either - so then what? Next year the "Future homes standard" comes into force along side more tweeking of the Building regulations - so expect more of this stupidity coming to a cavity near you soon..... Does anyone really think Air sourced heat pumps are the future for heating homes at scale.?????? W.T.F
@martin2466
@martin2466 Месяц назад
Air source heat pumps are not the answer to the boiler replacement issue for the domestic housing market, at scale..... #heatpumpsareshit.
@scottlewis7893
@scottlewis7893 Месяц назад
Am they heck
@sch-handyman
@sch-handyman Месяц назад
How you can't get it that the wool insulation you used will soak moisture like sponge and will never dry out. Same as your foamcrete blocks. Unless you manufacturing penicillin from that mould you gonna get.
@SkillBuilder
@SkillBuilder Месяц назад
It has a water repellent face.
@higherfordkid1625
@higherfordkid1625 Месяц назад
Who would be a bricky in this god awful climate !
@W2APS
@W2APS Месяц назад
Silly isn't it? Feels like an odd comment to make. Our houses in this country aren't energy and thermally efficient enough and need to be better whether old or new. Especially if you want to keep your energy bills down.
@martin2466
@martin2466 Месяц назад
Dont worry new legislation is on the way. Future homes standard, comes into force next year and thats just the beginning.
@SkillBuilder
@SkillBuilder Месяц назад
It is silly because there are diminishing returns on insulation. The first 100mm is much more effective than the next 100mm. If they allowed you to build closer to the boundary it would help recover some of the lost space.
@user-eq2dt5hz4p
@user-eq2dt5hz4p Месяц назад
All that extra work covering up because of the weather. But are you making any money building extensions? I stopped building extensions years ago. I just do roofing now,....... when its not raining!! Good luck guys, hard work dose pay.
@julianowens4071
@julianowens4071 Месяц назад
Omw- troll city,give it a rest,great builder’s doing a great job while you lot who basically don’t have a clue sit around ordering Uber eats talking nonsense
@timgranthunnisett380
@timgranthunnisett380 Месяц назад
The background music to this vlog reminds me of my old man's porn (VHS) collection… in black and white 🫣
@SkillBuilder
@SkillBuilder Месяц назад
Then it should have made you very happy with those fond memories.
@paarker
@paarker Месяц назад
Call me anti-fascist, but I think the owner and the designer should be the ones deciding on the level of insulation. The owner is the one paying and the bills. What would do without the private companies having a government monopoly, writing the rules for every industry. A wise economist might say this across every industry is why the UK gets poorer every year. What rules can they come up with next year. More expense they don’t have to pay but those working and owning the place have to pay.
@martin2466
@martin2466 Месяц назад
Next tear its, "The future homes standard." and that is just the beginning. As soon as the eco - zealots really get going, the Government will be shutting off the gas taps, and forcing us to go all electric. Its mad and will drive the country backwards.
@paulacooke5466
@paulacooke5466 Месяц назад
😂 so the next person who moves in gets a cold damp house?
@lowrangedifflockers2209
@lowrangedifflockers2209 Месяц назад
Not keen on 150mm cavity, so do 100mm with 25mm celotex on the inside block face, dop dab.
@SkillBuilder
@SkillBuilder Месяц назад
You can't dot and dab Celotex
@1987pagey
@1987pagey Месяц назад
He means insulated plasterboard
@steadfastandyx4947
@steadfastandyx4947 Месяц назад
Is it a wonder young people don't want to be builders and tradesmen. Just pain. I'm one and unfortunately know.
@TheToolnut
@TheToolnut Месяц назад
Young people are soft as butter, no character, mental toughness or back bone.
@martin2466
@martin2466 Месяц назад
@@TheToolnut Not all of them......
@TheToolnut
@TheToolnut Месяц назад
@@martin2466 Agreed, ninety percent of them are useless.
@nicksimmons7234
@nicksimmons7234 Месяц назад
Old men crying about 150mm. 40 years ago crying about double glazing.
@Roger-Bisby1
@Roger-Bisby1 Месяц назад
@gdfggggg
@gdfggggg Месяц назад
My dad moaned about cordless drills 🙄
@Me-zo8yc
@Me-zo8yc Месяц назад
@@gdfggggg But they are amazing. The time savings must be almost countless.
@stormthetawnyowl.2348
@stormthetawnyowl.2348 Месяц назад
Not being funny but those blokes don’t need the myther of you filming and stuff .
@SkillBuilder
@SkillBuilder Месяц назад
Very true, nobody needs a film crew. We are going to set up a new channel to bring you hours and hours of nothing.
@namAlexander
@namAlexander Месяц назад
yet new builds are shocking and getting worse
@martin2466
@martin2466 Месяц назад
Volumetric house building is mainly shit - quality.
@namAlexander
@namAlexander Месяц назад
@@martin2466 make you wonder why they even bother going to collage to learn a trade as once on new builds its out the window, no pride just figures figures ect sad
@Nomoreranch0
@Nomoreranch0 Месяц назад
@@namAlexanderAgreed. Seems it’s one rule for big construction and another for your average builder
@ncey8713
@ncey8713 Месяц назад
One thing I can't stand is tradesmen who show up in trackies, trainers and a hoodie. Especially when it's one guy in a crew. Total lack of professionalism, might as well show up in your PJs
@denty32
@denty32 Месяц назад
How would you like them to turn up? In a suit maybe
@royduncancarter1467
@royduncancarter1467 Месяц назад
Don’t often see bricks going up before the block work 🤔 not up north anyway
@mace106
@mace106 Месяц назад
@@royduncancarter1467 i always do bricks first if possible and am up north and been that way for last 30 years
@zororat
@zororat Месяц назад
Seriously, what if his workmanship is second to none, do you really care what he's wearing? And do you expect these guys to wear expensive clothes that get destroyed by cement and need thrown out regularly
@northeastcorals
@northeastcorals Месяц назад
@@denty32 Silk pyjamas or nothing as far as I'm concerned!
@Merdock-uj5xl
@Merdock-uj5xl Месяц назад
Get a life
@rumco
@rumco Месяц назад
I hate that red brick so much. Even new builds look like shit in England.
@jdjones4825
@jdjones4825 Месяц назад
Lego land
@pigswillbepigs
@pigswillbepigs Месяц назад
Were is the heat pump ? Or has Rodger seen the light like so many of us. ?
@martin2466
@martin2466 Месяц назад
Heat pumps are nonsense spouted by Johncock, when he was prime minister. Expensive shit. #heatpumpfails
@pigswillbepigs
@pigswillbepigs Месяц назад
@@martin2466 I know, tell Rodger. Obviously you didn’t see the irony in my comment. Perhaps you don’t know the history with HPs and Rodger. 👍✌🏻
@martin2466
@martin2466 Месяц назад
@@pigswillbepigs Thanks very much for the explanation - your irony was totally lost on me..... But on a more serious note, I have just taken time to learn all about A.S.H.P`s and what an eye opener it was to. They really are an expensive frippery that this insane Government are trying to force on us. F.F.S 🙄😁👍👍 Thanks again.👍👍
@martin2466
@martin2466 Месяц назад
@@pigswillbepigs Thanks for your reply - and I`m afraid the irony went completely over my head. I had a real shock when I looked into heat pumps. Really inefficient and costly.
@pigswillbepigs
@pigswillbepigs Месяц назад
@@martin2466 👍😂😂 That Rodger was pushing them not long back. He has his loyal sheep, oups I mean followers, alas I’m not one. ✌🏻👍
Далее
Why Has Your Wall Cracked? and What Can You Do?
11:53
Просмотров 838 тыс.
Dancing makes everything better 🕺🏼
00:16
Просмотров 5 млн
Let's Spray - "NOKON BLUE" Pearl over Black
19:28
The Coolest TOOL I've ever BUILT - Scrapyard I-Beam
26:33
Jackpot! One Mans Trash Is My GOLD
34:41
Просмотров 15 тыс.
Damp survey - Conflicting advice.
12:50
Просмотров 1,3 тыс.
CAB TOUR | Scania SECRET compartment | next gen 500S
23:24
Tree Thinning - selecting trees to extract
5:50
Просмотров 79 тыс.
How Many Mistakes Can You Spot on This Roof?
19:00
Просмотров 143 тыс.
Make a Rake
6:47
Просмотров 94 тыс.
Dancing makes everything better 🕺🏼
00:16
Просмотров 5 млн