Extremely Complicated Part Machined on PUMA SMX 3100ST 9 Axis CNC Machine | DN Solutions

Подписаться 895 тыс.

Просмотров 921 тыс.

50% 1

Setting Up a Complicated CNC Machined Part on the DN Solutions SMX3100. This is part 1 in a series that will show you how to machine a part from raw stock to finished part. Material is 17-4 H1150
Help support FREE industrial education by purchasing the products shown in our videos at: rebrand.ly/TiStoreBOOM. Easy purchasing, at a fair price.
FREE CNC Machining Academy:
rebrand.ly/TiAcademy
FREE Aerospace Academy:
rebrand.ly/TiAero
Subscribe for daily content and expert knowledge: rebrand.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
rebrand.ly/TiAcademy
Follow us on Instagram:
rebrand.ly/TiINSTA
Like us on Facebook:
rebrand.ly/TiFACEBOOK
Join the conversation on our Facebook Group:
rebrand.ly/TiFBGroup
Connect with us on LinkedIn:
rebrand.ly/TiLINKEDIN
Follow our CEO, Titan Gilroy:
rebrand.ly/TitanGilroy
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - rebrand.ly/TiKennametal
Doosan - bit.ly/DoosanTiYT
Mastercam - rebrand.ly/MastercamEDUTiYT
Blaser Swisslube - rebrand.ly/TiBlaser
Tormach - rebrand.ly/TiTormach
Solidworks - rebrand.ly/TiSLDWRKS20
Trumpf - rebrand.ly/TiTRUMPF2022
Trumpf TruMark - rebrand.ly/TiTRUMPFTruMark
Trumpf TruPrint - rebrand.ly/TiTruPrint
Markforged - rebrand.ly/TITAN-Markforged
Tyrolit - rebrand.ly/TITAN-Tyrolit
Mitutoyo - rebrand.ly/TiMitutoyo
Haimer - rebrand.ly/TiHAIMER
LNS - rebrand.ly/TITAN-LNS
FANUC America - rebrand.ly/TiFanuc
Schunk - rebrand.ly/TiSchunk
#CNC #Machining #Machinist

Наука

Опубликовано:

11 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 186

@misfit3050 2 года назад

I would love to have access to a blank sop sheet from you guys and tool sheet

@TITANSofCNC 2 года назад

Just go to aerospaceacademy.com and download for free

@manibalansivakumar3109 2 года назад

Can u upload the continuation of that machining

@johnkeefe20 2 года назад

Why not center drilling BEFORE drilling?

@SGIABC Год назад

@@johnkeefe20 Carbide Drills do not require a spot drill. In fact having a spot and especially a center as a pilot increases the chances of the chisel chipping on the drill itself.

@Subbestionix Год назад

@@manibalansivakumar3109 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vIOJTaEo9_g.html

@paulkraus4799 2 года назад

Man I love how Tyson explains exactly what he’s doing and why

@adm2765 2 года назад

Thanks all at TitansofCNC. Great explanation from Tyson! Looking forward to seeing the next installment already 🤞🤞

@blackburn1111 2 года назад

I'm a bandsaw operator at a metal distributor, supplying customers like you guys. I love seeing what sorts of things our metal may get turned into. Usually we never know. A very technical sounding material like 17-4 PH cond. H1150 always makes me curious. I think it's one of the few magnetic stainless steels i work with if memory serves me right?

@godbluffvdgg 2 года назад

:)...This 9 axis stuff is amazing to see...I remember when 5 axis was the CNC du jour...

@Chainsawyou 2 года назад

Still is for me lol

@MrStorm029029 2 года назад

Yeah when he started saying insert lathe tools one carousel and the mill tooling in the other...😳🤤

@godbluffvdgg 2 года назад

@@Chainsawyou And, most of the rest of the industry as well...It's More'n you need in most cases...-X axis roll and yaw are luxuries...:)

@angrydragonslayer 2 года назад

We had a millturn with two turrets and two 5-ax milling spindles in a company i sadly only worked at for a few months The guy programming it said he was honestly amazed at how often he got to use all four at once, mostly running them in two turret/spindle pairs from what i saw (using one pair on main lathe spindle and the other on the secondary)

@swamihuman9395 2 года назад

Great vid. Well laid out. All seems so logical - which it is - but what really impresses me is the knowledge/experience it takes to be able to figure out how to program the part, and exactly what's needed.

@Mike-lt6sj 6 месяцев назад

It used to be that way, now it's much easier.

@krazykillar4794 2 года назад

Wow , im absolutely blown away 😳 You guys are awesome, I love these Videos . What a blessing for the youth , you can't learn like this anywhere else . Thanks

@davegill8634 2 года назад

Love these Videos , Those Machines ,Quality Content Tyson !👍

@cyclingbutterbean 2 года назад

17-4 stainless steel. The best!

@simonallan9941 2 года назад

That's so awesome bro 👏 that machine is way more advanced but still very much the same principle as my Okuma LC40 and Moriseiki CNC lathes in the 80's lol I really wish I could have a spin on yours 🤗 thanks awesomely for the great and very therapeutic videos 😀

@farhanpantoji661 2 года назад

Hi titan!!. you guys do a great job. I will to love programming like you

@robertgillcash1696 2 года назад

Wow. I know what you're doing, but, geez, it's like you're speaking an alien language. The training and learning what to do for a machine like this is impressive. Wow, good job guys. I don't even have enough life in my body left to learn enpugh to do all that.

@nathanthomas8184 2 года назад

Great job Tyson on tool selection Get those chips flying

@naitikvishwakarma1816 2 года назад

Love from India🇮🇳 Keep it up

@dikobraz38 2 года назад

Great video 📹 love the way you organized the tools, I did the same on multus instead of T41 T100 for the lathe tools. Keep the good work 👏

@DarkAeroInc 2 года назад

Looking forward to watching part 2! :)

@Subbestionix Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vIOJTaEo9_g.html

@rahimselmani8006 2 года назад

Absolutely beautifully explained video

@leosgarage7157 2 года назад

well done tyson, good explanation as always

@jayjaydelarosa475 2 года назад

I love all of your video... Titans you have a perfect machine no matter what shape of metal

@ronnydowdy7432 2 года назад

I was waiting for the part to be made. What happened?

@TITANSofCNC 2 года назад

Video would be to long… It’s a series. Will come out next week.

@chivasx557 2 года назад

Nah nah it's called a set up 🤣🤣🤣

@user-wg3ni8pt5e 2 года назад

番成中文

@andrewbeaton3302 2 года назад

Great video!

@johnmontgomery1421 2 года назад

The only issue I have with putting a center into bar stock choked up and then extending it is that the center will not rotate on the new rotational centerline (especially if the stock is not straight). When you engage the center, you will force the center of the part onto the live centers rotational axis. As long as the live center is engaged, the part will rotate true , but once it is released, it will spring back. Maybe this is not an issue with this part, but I have seen many a machinist struggle to understand why they are having runout issues when utilizing this strategy. Maybe you are going to cover this later, but I figured it was worth mentioning, since this is an educational video.

@michaeloverdorf3196 2 года назад

Absolutely right, I don’t think they have done long shaft work before.

@Awfultyming 2 года назад

Glad to some some real machining content again. #backtobasics

@varmint243davev7 2 года назад

I like Tyson's videos

@melearningtech8741 2 года назад

Excellent work

@deepeshkumar5408 2 года назад

great video a lot of information good job .

@JSomerled 2 года назад

Cool.can’t wait

@huckfitler4268 2 года назад

Great work. Greetings from germany

@_domlnlk_ 2 года назад

this is how i like the vidz ... nice

@hms1688 Год назад

Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.

@rcandcnc9684 2 года назад

Looking forward to the next episode. Did you finish the actual aerospace part on a grinder as well or on a lathe?

@Tex81024 2 года назад

a little late but the print calls out for a ground finish, id imagine it'd be the same, a shaft like that would usually be used for extremely tight toleranced alignment of parts

@vvioletlawiieri1593 Год назад

Thanks for sharing . Wichita ks 2022

@DazePhase 2 года назад

Damn, these machines are so advanced and a lot of thought is invested into selecting the proper tools and way to machine the part. Meanwhile I work with old machines from the 80s. xD

@carriepatton7811 2 года назад

what is the name of the live center from royal? Been looking for something like that for our sub spindle

@12mikeg12 2 года назад

can't believe they set the tools in the collars without measuring the end location as it relates to the collar position when in the machine, crazy

@348frank348 Год назад

Gee thanks for showing the part being made in action

@fuknuz 2 года назад

When it said tight tolerance, I was curious. I have had a 14 inch turn on 5/16 threaded rod that was 0.500 +0 -0.0004. That i did on a 10 year old haas tl2. Tell you what, that took some patience lol

@5oclockshadowbanned154 2 года назад

You can actually hear how hard that material is when it's slid into the jaws.

@GeneralG1810 2 года назад

Aw come on man don't leave me hanging, I wanted to see you make the part

@activemailorder6 2 года назад

Why did you decide to put the OD threader in the lower turret? I would have assumed to load it with the other OD turning tools on the 5 axis turret. What are the benefits?

@TheFeralEngineer 2 года назад

Probably just for sake of the demo. Lower turret on these types of machines have a dramatically less tool change time.

@joey.cnc. 2 года назад

From my experience. I noticed more error when using a magnetic base w/ test indicator to find the center of a tool. I found using a co-axial indicator is more reliable and easier to use. It does require little more time setting up that co-axial indicator but it's worth it.

@paulpelletier9422 2 года назад

depends on the indicator I think, nice ones are fine with going upside down but cheapers ones will shift slightly with the change in gravity.

@travistucker7317 2 года назад

@Paul Pelletier typically the mag base. You put it on a solid arm and they normally do fine. Better than a coax in my experience, but not as fast

@71brp84 2 года назад

Curious why you don't use the tool setter for X of the live centre. Could measure X+ and X-, then take the average.

@travistucker7317 2 года назад

Probably wants to make sure it's dead on. I would tool set, minus rad, then indicate

@benmarchant4474 2 года назад

Really struggle with imperial measurements :p just taking your word on the tight tolerances :P

@clubmfg 2 года назад

I'm learning I have a quick question for the rougher, noticed you used a CNMG and a DNMG. Can you elaborate on that ? Would like to learn why two roughers were used instead of one. Thanks :)

@mikemallano2484 2 года назад

If you look at the inserts when they're loading the tool holders in the video the difference between a "C", and a "D" is the tool shape. "C" is more of a square shape for either general roughing, up to finish machining on a long, straight surface (as it is a very popular insert). "D" is a diamond shape insert for machining up to, and into sharp or tight corners or radius' where a "C" insert would not fit, or work.

@willford0493 2 года назад

i usually use a dmng when i am using my tailstock as i only have the one live centre which is pretty big :) it gives me clearance for that. i use a 3 axis x, z and c axis lathe

@AussieBoss-rj8mf 2 года назад

Who long does a job setup like this take?

@elya_magic_36 15 дней назад

Hello, I want to know which software you recommend for programming that is used by all or mostly, is cheap and has the most use...

@davidprock904 2 года назад

How can a pressurized system (earth) exist inside of an ever expanding vacuum (outer space)?

@jeffbee2337 2 года назад

Excellent video and like the utilization of a live center. The Husky ratchet and hex driver was a bit of let down - did not expect to see that in your shop.

@barrysetzer 2 года назад

Hahaha Snap On isnt for every operation. Gotta buy hand tools that get the job done. Remember that we want EVERYONE to succeed. From the 1 machine garage startup to the multi billion dollar rocket company

@TommiHonkonen 2 года назад

That long indicator arm is going to flex so much that you would be better off not doing it like that. I measured 0.2mm flex on a proper arm when fully extended and doing 180 flip. I have a jaw that can take dial test indicator straight to it and therefore it wont flex at all for indicating centers.

@chopthesheep90 2 года назад

I was thinking the same thing I use a coax in a collet works great, way easier to read too no mirrors

@chopthesheep90 2 года назад

Then the mag base can be properly used to keep the coax from rotating lol

@ninjaabcde Год назад

Whyd you use two OD roghers?

@rathnaram9600 Год назад

Lovelt

@pfufoostuff7483 2 года назад

On the multus I turn these soort of parts without a center even longer I first make the thread and then rough the rest I even did slots milling on dia of 30 mm sticking out 650 mm super duplex if flexing of the part I run two finishing cuts with 2 tools and finish the part on the sub spindle.

@barrysetzer 2 года назад

Dude make a video of that! And then put it online for millions of people to tell you what you couldve done better 😂

@patrickmartinez3217 2 года назад

16-18 inches hanging out machining on it all over seems pretty dicey to me. That’s going to bite you one day.

@pfufoostuff7483 2 года назад

@@barrysetzer I am going to check if I can find it because some times I make videos of it.

@pfufoostuff7483 2 года назад

This was the my tool I build it up even did the ball voor the valves completely ready only needed a polis no extra grinding in super duplex. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H7RSL4rPZXI.html

@patrickmartinez3217 2 года назад

Where’s the 650mm hangout?

@ethanbewcyk4111 2 года назад

Never heard of a UNJ thread before

@Michaelsloncehammr 2 года назад

Used to make the same part. That diameter gets a thread.

@JimVanEeckhoutte Год назад

All that money!

@VictorHernandez-nt3tw 2 года назад

I want to see how you machine 17-4ph H900. When we machine at H1150, it machines easier than non-heattreated 17-4. But at H900, we are struggling right now! :(

@TITANSofCNC 2 года назад

We have done a ton of H900 and H900… Especially for the Sub-Sea Industry. Will do some videos on H900 etc in the future. It’s all about the variables, correct tooling and parameters. Have you looked at our AerospaceAcademy.com we teach on machining way harder materials like A286, Monel etc. Lots of good tricks, tips and just great high level machining knowledge.

@VictorHernandez-nt3tw 2 года назад

@@TITANSofCNC Oh yeah I have. I love that series! I usually check on the academy on a regular basis to see if there are new releases. I wish there was a release of new projects every week on the aerospace academy but I know it is a lot of working put that together! I encourage all my employees to get onto your academy. That is how I see if they are truly wanting to learn machining or programming. If there is true dedication, they would have an account and be watching the videos in a few weeks. But when I ask back a few months later if they checked out Titans of CNC Academy and they say, no... then I feel there isn't true dedication to learning the trade if they won't even make the effort to learn this stuff for free!

@TheOutbackIndustries 2 года назад

@@VictorHernandez-nt3tw After Years of dealing with H900 and the "tooling engineers" leaving with there tail tucked between there legs because there golden tool melted in three seconds. on the milling side we think we have about figured it out. on the lathe side with stress to our customers please use 430F if possible. way way way easier to turn

@stbentoak5047 2 года назад

@@TheOutbackIndustries You had the wrong tooling engineers.. Get Sandvik in there with some good Blasers and some high pressure coolant, you will cut H900 like butter.. We did it for 25+ years....

@TheOutbackIndustries 2 года назад

@@stbentoak5047 for turning?

@MarceloPereira-ei8hl Год назад

Bom dia amigão

@koksalcelik75 Год назад

düz frezeye takabiliriyiz bunu acaba

@daveomacron4301 2 года назад

I could barely manage X,Y,Z,A and that was with Mastercam. With more time maybe.

@TellURide447 2 года назад

Omg it 18” long?? That’s going me a raging clue right now

@mdunbar008 2 года назад

Okay, what am I missing? Why is this part being ran on a 9 axis machine? From the prints this looks to be a pretty simple part.

@fishsticks88 2 года назад

My question is how do yall keep your machines so clean

@TITANSofCNC 2 года назад

We clean them daily

@nikkismith5078 2 года назад

@@TITANSofCNC how long is set aside each day for that?

@Zontics 2 года назад

@@nikkismith5078 at my shop we take the last 15 min to 30 min every day to sweep and wash out the machines and we get compliments from costumers about how clean our shop is compared to others which is good to hear

@Sebastian-ed5kt 2 года назад

@@Zontics I really love to hear that some people still clean the machine... I'm an apprentice and my task for now is restoring a 8 year old tool changer with 2-3mm of rust in there

@fishsticks88 2 года назад

I try to clean my machines in between each job. But with the amount of work I have it's hard to stay on top of.. and coolant changes are few and far between

@danieldeaugustine6583 2 года назад

H1150 isn't hardened it's just as hard as annealed but it machines better and is less gummy

@koolkiwikat 2 года назад

Bahahaha you sound like the boss they way you speak

@TITANSofCNC 2 года назад

He is… and He is a Bad Ass Machinist

@texasermd1 2 года назад

@@TITANSofCNC so how about a BOOM! for the BAM!!

@danmclean2899 2 года назад

What's a unj thread? Never heard of it

@brandons9138 2 года назад

UNJ threads have a controlled root radius. It common in aerospace work. The root radius helps keep the root of the thread from being a stress riser and failing at that point.

@randomidiot8142 2 года назад

@@brandons9138 for some reason I thought iso threads already had it and threading inserts weren't a sharp 60° V.

@brandons9138 2 года назад

@@randomidiot8142 You are correct, most threading inserts are not dead sharp. They will have some kind of corner radius of some size. Whether it conforms to the UNJ spec is another question. Inserts that are ground to make UNJ threads will have a corner radius that meets the UNJ spec. With a UNJ thread the radius at the root is a specified size, if it it out of spec, it is a bad thread.

@marc-antoinethebeautiful7714 2 года назад

IF this is extremely Complicated 9 Axis Set-up then I am a Grand Master 9 Axis Programmer/Set-up/Operator CNC Machinist.

@barrysetzer 2 года назад

Prove it! Lets see the video!

@douglaspierce7031 2 года назад

I think 17-4 machines better hardened

@TITANSofCNC 2 года назад

Yep, breaks that chip

@davidgray721 2 года назад

You all do good things but 17-4 h1150 is not that hard. sometimes you guys say a material is harder than it actually is. h1150 is a good stable material to run. keep up all the good work

@andymcdo 2 года назад

this also isn't even remotely a complicated setup

@alexkern9134 2 года назад

That material is heat treated??

@TITANSofCNC 2 года назад

What’s up Alex😁 Yes… it’s H1150 You can google it to find our more about that spec

@Zontics 2 года назад

@@TITANSofCNC I machine 17-4 ph almost every week. I'm doing 4"x20" shafts this week that are H1075 and it is no fun! The thing I'm most curious about is the insert grades for the lathe. I've gone through so many different grades and chip breakers and nothing lasts long in that stuff. Can't wait to see the machining video! I run a new 6 axis lathe but you're machine makes me drool 😆 I want it

@alexkern9134 2 года назад

@@TITANSofCNC awesome. It just didn't look heat treated, maybe they did it in a vacuum. I am used to seeing the outside with color. I cut H900 every day. Sick machine!

@alexkern9134 2 года назад

@@Zontics kennametal KCU10, sandvik 1115

@Zontics 2 года назад

@@alexkern9134 bought a box of the sandvik grade 1115 but unfortunately it's worse than the insert I currently use with recommended speeds/ feeds. Oh well, was worth the shot

@cobrawins 10 месяцев назад

السلام عليكم مطلوب شريك لعمل ورشه تستخدم نفس المعدات

@andrewut7ya511 2 года назад

I bet these guys could build the lego firestation in about 3 minutes, just sayin.

@santboiboi375 2 года назад

Una propaganda de "kenametal" el plato del centro d mecanizado alemán Seguís ,trabajando en pulgadas un sistema super complicado ,aparte las vistas de los planos las giras en sentido contrario a los planos europeos

@king0dasouf 2 года назад

Gotta trust whoever your running behind to trust that tool setter!!! Why not set X on the live center with the tool setter? At least your close when you go sweep it in.

@TommiHonkonen 2 года назад

For a center you would be good enough to set the x to whatever the tool body is at, say 100mm and z the same. Then you dial in the x proper.

@michveldvvid 2 года назад

Rob dahm is looking for you

@theahmedmamun Год назад

Price this machine???

@derekstaples7260 Год назад

Hey I'm impressed with you guys making these components, but try holding these tolerances on crap machines and doing it and give me a call.

@Kwestor92 2 года назад

It was hard to watch when you finding the center of this tools using indicator on looong arm. What about parallelism and perpendicularity?

@Runkpapper 2 года назад

Geometry should be fine out of the box, but with that long weak indicator arm he'll definitely end up off-center

@Kwestor92 2 года назад

Most of the tools look like new, unused.

@randomidiot8142 2 года назад

The arm length doesn't matter. There's not enough pressure to deflect the arm with just indicator tip pressure.

@Runkpapper 2 года назад

@@randomidiot8142 gravity is enough to pull it

@randomidiot8142 2 года назад

@@Runkpapper I realized later you were talking about a different arm. How do you fix it? Carbide arms? Carbon fiber arms? Ditch the indicator mount completely? If the deflection was bad enough to cause significant issues, you'd think the practice would be avoided. Gravity should be consistent, why couldn't you learn your tools and know the difference to compensate for it?

@moviehop4645 10 месяцев назад

Sir I need a job in cnc

@lukewaggoner9513 Год назад

"This beast here is about 18 inches long." Brag about it...

@gurmukhsingh1440 2 года назад

Sir I am coching for cnc .please listen the channel.

@BPond7 2 года назад

Blueballed! But a nice vid, nevertheless! 🖖😀

@stbentoak5047 2 года назад

H1150? We ran tens of thousands of pounds' of 15-5 H900 Solid bar including deep hole drilling and intricate ID grooving for Aerospace applications. HT in 4 ft bars then barfed complete at H900. Okuma LTM's and EX 3000's... Want to really move out on parts like this? Put ChipBlasters on all your machines....

@fruchtsafarigonzo364 2 года назад

Ez Pz Lemon s.......

@randomidiot8142 2 года назад

I like the sound control on the walls. I'm assuming it's for sound and you're not in an asylum..

@semperfidelis8386 2 года назад

where's the rest??

@massimo79mmm 2 года назад

when you turn on the godmode

@brandons9138 2 года назад

I kept waiting for the complicated part of this setup. Maybe in the second half of the video. Loading tools is not complicated.

@barrysetzer 2 года назад

Neither is leaving a youtube comment. Way to go champ

@brandons9138 2 года назад

@@barrysetzer I didn't title my post as being complicated though did I? This video is seriously trainee level stuff being called complicated. I spent my first year and half in the trade working the tool crib. At least stop with the overly hyperbolic titles. This is the definition of clickbait.

@barrysetzer 2 года назад

It all depends on what level youre at. Are you doing 80” diameter inconel blisks on a 27 axis machine with upper/lower turrets with live tools and steady rests and live centers and a mill spindle? Congrats, youre .01% of our audience. Whats easy for me just might blow your mind. Be mindful of perspective.

@brandons9138 2 года назад

@@barrysetzer You're right that sounds complicated. Problem is, that's not what is shown in this video. Keep in mind we are talking bout THIS VIDEO and it's overly sensationalized clickbait title. I work on the opposite end of that spectrum. I make parts where you can fit thousands of them in your hand. One sneeze and you can lose a whole shifts worth of work. At my shop work in titanium with tools that you can barely see without magnification. We make a medical implantable part that we thread mill a M.8X.2 ID. With tooling like that even handling the tools is difficult.

@jadedcarton Год назад

@rickhammer2374 Год назад

Guess I missed 6 of the axis's.

@Louishall86 Год назад

So you guys forgot to machine the part? Why half video?

@TITANSofCNC Год назад

It’s a series… all videos are on our channel

@rightsidelanechoice7702 2 года назад

Heavy ass stainless steel on an aero space project huh?

@lucasspeers4436 Год назад

Reading these comments sounds like you all want to blow him, not that hard guys learn your trade then learn your machine and everyone makes money kinda the whole point of being more than a button pusher, can't wait for the dissatisfaction of this comment but very truthful.

@todoryalanski5580 2 года назад

@davidethridge6033 2 года назад

While you button boy's are still fiddle farting around with your fancy stuff, I'll have that ready to be finish ground in an hour and a half or less. On an old Mori engine lathe and a Bridge Port Mill.

@pokerplayer6495 Год назад

Wow that was disappointing

@cncmachinist3642 2 года назад

Not bad but, Extremely complicated...? 🤔

@1ginner1 2 года назад

Are you actually kidding me? you never ever centre drill a part and the pull it out to where you want to machine it. Check this out. After you have machined the part take the centre out and put a DTI in the centre hole, running true? I think not. You might get away with it if you are only gripping on approx 10m in your jaws but any more than that when you remove the centre you are in a world of runout.

@joesebalj1962 2 года назад

Exactly what I was going to write. Your right on. You can not do that. Part must be out at full length then you center it so that your center is running true to your spindle

@barrysetzer 2 года назад

Lol you guys obviously are NOT accustomed to huge material stickout

@joesebalj1962 2 года назад

@@barrysetzer acti am work with it a lot The way he did that is incorrect do to the fact that he center drilled it and then moved it. If you close in the video the part that he turned is not running concentric. Most pet think by sticking a center in it that it will be correct IT IS NOT once the center is removed the part will spring back and will not be concentric

@shadowdsfire 2 года назад

@@joesebalj1962 What's your solution then? If the part stick-out is so long that you can't even center it? (I'm not saying that is true for the part in the video, this one he could absolutely center it)

@joesebalj1962 2 года назад

@@shadowdsfire a face driver