eXtremeRate PS5 DualSense EDGE Controller Full Replacement Shell 

honestly I think running this clear shell with the black buttons and touchpad would be so awesome. I like how you can kind of hybrid different colors together.

I bought your case, I installed it following your video guide and the case looks better than the original. Congratulations for doing things with such a level of perfection. I am very happy with the result.

Great guide for an install. Also great product in my opinion. I got the black shell and it looks amazing.

Left a review on Amazon for you guys this thing came out freaking mint brother when I tell you i couldn’t be happier. I’ve had the dualsense edge sense it came out and I finally picked up a second one just to custom build I was a bit scared at first but omg it was so easy almost all the screws are the same and your video is so discriptive thank you guys!!!!

My back cover grips were peeling out, ordered and just swapped the back only, it's miles better right now, also the mate front plate is so much better than the glossy one, totally recommend!

Half way through and it looks amazing

To anyone struggling with getting the bracket off from inside the triggers: After 15 mins of getting frustrated from using the pry tool provided, i decided to use a very small flat head screwdriver and it worked like a charm. Just be careful with how much pressure you're putting on the bracket itself. Remember to push upwards on the bracket after getting the first side unclipped or else it will click back into place when you push on the other side.

even tho it was tedious i do a thank you for every detailed step

The motion diagrams are insanely helpful

Mine coming today, pre order gang 💪🏾🙏🏾

Just finished mine thank you!

Say you the Goats without saying you the goats 🐐🔥

Im buying this mainly to get rid of the rubber grips from the stock shell. awesome

I ordered the atomic purple. If you have a charging dock that the controller rests on you have to really push it down hard onto the charger for it to catch the connection. I installed it perfectly as well

Extremerate...I love your detailed videos. In every step, you show how you unscrew a screw correctly 😅

Great video, is there a possibility you will make a retro kit for Dualsense controller in style of Playstation 1?

good tutorial it helped alot thanks!

I believe, when it's all said and done, extremerate would have given us the tools to make the pro controller to rule them all. Just waiting on clicky/extra buttons 👀

i will pay to not have to do this and potentially break my controller, but respect for such a detailed guide

Can you please make some shells with GRIPS on them? I installed a 3rd party set of grips, and they're already peeling off. I bought your black dualsense edge shell and installed it before this video was released. It looks AMAZING. I just wish you had grips on them.

Ordering mine today, never done a mod before but this video makes me confident lol. IF anyone has any tips would be very grateful 🙏🏻

Thanks for the detailed guide, mix & matched various sets and controller looks awesome! What are the two springs around the PS Button for at 6:30? Definitely not asking because I forgot to put them back in... 👀

Just making sure. Can you mix and match between ExtremeRate versions and the default parts already on the controller? for Example: changing the (L+R)face(s), front, bottom plates/covers and the pause + share buttons with extremeRate versions. But keeping the (L+R)Triggers, (L+R)bummers, face buttons, and original touch-pad. Would they interfere with each other? besides cosmetically.

Just did the black see through replacement but kept the OE buttons, touchpad, logo and triggers. It looks great. Basically anything that said Sony or had logos, I left on the controller.

I bought the case and installed it just like in the video. I have got one question and one little problem tho. Do I need to use the provided screws or is that optionals. Since I only now realized after completing it that you use the provided ones in the video. Also I am 99% sure I did everything correctly but i Have a small gap between the back plate and cover and cannot find a way to fix it. I tried titening all the screws again and putting it back together. I dont see where the problem is other than maybe it being the screws if that makes a difference to using the original screws. I would love to get some advice from you or anyone who had the same experience! Otherwise quality is amazing and feels great!

Let me know when you guys release a snes she'll for the dual sense edge 😁

The part where you remove the internal clip from triggers is INSANELY hard. I legit broke the clip. I have submitted a ticket to your support. That part is crazy hard, not to mention went through like 2-3 of those tools you gave to pry things open.

Broke my battery connector to the controller, the little grey part with the wires. Didn’t realized you had to pull up and not away. The video cut away from that part and went to the next step. very sad about this

I noticed in the video that the USB port was stuck at the port opening of case. You need to make sure that the USB port is snapped fitted to that part of the shell.

Do you sell the colored or clear buttons with the directions, or shapes? I got the black edge controller shell but didn't like the buttons so i used the factory ones.

Bought it and tried installing, the front and back piece is not perfectly aligned and that made my lower attachment back piece not be able to attach properly breaking all the clips and rendering this 50 AUD plastic shell kit useless now. Hoping Extremerate can replace or refund me

Ps5 edge button logo/power on is the same type and shape as the standard dualsense one and can be used instead?

Pls release clicky kit (buttons) so I can install both at once ❤

I plan on customising my Edge soon so Thanks for the guide. Now I hopefully won't destroy this £200 piece of equipment

Clicky triggers for the dual sense edge and it would be complete for me it’s so close to perfection anyway pls make it happen!

Does this come with the tension spring for the faceplate? I lost my original one and trying to find this spring is a joke. I will buy this set just for that spring. Thank you

could you start thinking about designing a mini wheel for the edge version ? this is adding a whole new input decide without the joystick like the normal controllers versions have with a lot of 3d prints on the internet , there's non that works for edge yet but would be perfect and no big brand has ever implemented it

Wow I get a third of the video just to find out I need to heat up the touch pad😭😭😅 wish I knew this before buying

Any plans to have a transparent orange color?? :c

Nothing feels like it fits flushed. Did I do something wrong? I made sure to follow the video step by step but everything at the end doesn't seem to just clip and fit securely?

Extremerate, please make those clips on the last back plate stronger,, i just picked it up and one of them broke

Hello, should i not use the original screws instead of the ones you get with the shell?

Do these replacement shells have the grippy rubber part too on the back? Or is it just hard plastic?

Have an issue where the controller will not turned on unless plugged in and cannot read battery life

I was trying to carefully remove the internal battery of the edge, but the white plastic casing stayed attached to the controller while the wires ripped away from that plastic casing. So I think I’m kind of screwed with this mishap I made. Does anybody have any general advice for me? I don’t wanna have a wasted $200 controller for such a silly thing happening

Are there places i can send my controller in to have this done instead of doing it my self im afraid ill break it cause of my shakey handz

Will your led kit for bdm 30 work on the ps5 edge controller?????

Looks great except the last under shell piece not fitting right at all. Had to mess with the clips to get it to fit 80% right.

The heat gun melted the old touchpad plastic 😂

Can’t get the back cover on without breaking it..

Dropped the final screw and went to pick it up. Realized at some point one of my small springs fell out half way through the rebuild. ¯\_(ツ)_/¯ Guess it's a little lighter.

me patiencely waiting for the controller to turn purple

can you use the rise kit bak buttons alswel?

I have a problem with the rear right telegram behind stuck and it is not possible to open you to reply

My back plate came with all the prongs smashed over. No wonder I could fit the fcking thing into the back. THEN on top of that, the backcase is too big. It wont latch fully on the one side where you grab it, very noticeable. I thought I was doing something wrong and it turned out I got a shitty backplate. I tried my old one I took off and got it within a minute. So i was like wtf. 1* out of 5 for me. Cool designs but it not fittting properly is making me mad for the cash I spent and I was beyond careful doing this

broke 3 pry tools trying to do the Triggers Rip

Hmmm...wonder what that long pinky nail is for... 😶‍🌫️

do you have clicky kit for the edge?

It is possible to remove the rumbles?

I’m having an issue were my buttons work on the Home Screen but once I load a game they stop working.

Yes, but we need 2 extra back buttons please! How soon to get this+

Is there LED mod available for a dualsense edge?

DOES THE CLICKY HAIR TRIGGER KIT PS5 WORK ON DUALSENSE EDGE????

my front panel won’t open any reason why or help on how to fix it ?

Did all this and for some reason my controller wont stay on

Having trouble getting the board off the touchpad

The screws that go under the L1 & R1 do not fit into the replacement shell. Bummer.

The video is cool but I got the kit and it does not fit for some reason. I took my time, used all screws in proper place and still when I get to the end, the controller does mot fit flush for me to even be able to use. I’m irritated now because I spent the money and can’t see to get this controller shell to fit properly

@richardt992 13 days ago I’m having an issue were my buttons work on the Home Screen but once I load a game they stop working.

Wait so yall got rid of the grips? Thats kind of disappointing tbh I thought yall was gonna do something to fix it not just get rid of it

Does anybody know of any services that do this for you? I’m worried I’ll damage it lol

1:22 launched the spring into a different dimension - can't find it. any ideas for a replacement people? thanks in advance

2:33 this screw is so insanely over the top tight that i cant remove it. It is now stripped and and considering just ripping the damn back shell off. Its so impossibly hard to get this screw out.

I think I did something wrong it makes a clicking sound when I turn it on

Brooo my controller is missing so many screws 😭

broke my spudger trying to remove the bracket from my first trigger. Such a weird thing to not simply include in the kit. dont see why that would be any more effort to include. not to mention my triggers and brackets were severely deforming while i was attempting to remove it just like the video. guess im just gonna leave my default triggers. To extremerate, just include the fucking brackets in the kit, why is that so complicated???? to anybody that has tips to help get the brackets out please enlighten me

My left PET sticker 26:52 decided not to aline properly when I put on the back panel and is now fucked. Does anyone know if you actually need those stickers. It seems pretty useless

Please, We need a product for Dualsense EDGE to ADD 2 extra Back Paddles (Buttons) or maybe 4 extra back Buttons. ASAP please. Thanks.

I broke a piece of the control😢

I wanted to buy it, but after watching it, I decided not to get into it 😅

this guy whos doing the tear down, has got major shakes some one give him Valium

Well everything went well until the triggers… ugh. Controller is damaged now. Great

BR ?

When will it be available on Amazon Germany?

Oh come on I thought it was purple :(

tylko po co wpakowac pada w taki badziew ?

Option and share buttons are too tight and short and do NOT work, also XO buttons only work in PS menu now not in game. Nightmare! 0/10

21:27

please get a real human to run through the steps, next time. he gave absolutely no insight or helpful tips for any kind of potential guidance through areas that could potentially cause trouble. A real human would be like, "Hey, heads up with (such and such.). be careful not to (somehting bettter than "dont hurt yourself", (because we dont want to be sued i guess?)) or, "Hey, here's a better way to put this part on such and like like, actual conscious human guidance. Why do you have a cyborg giving instructions?

Cant buy cuz im not at that region🥲