F-16 Home Cockpit 09 - How To Build DIY Push / Pull Switches 

Thank you - and yes, I'm a total amateur :-)

Perfect! That's the reason I'm doing those videos, great, if they help someone!

Thx a lot, henkie - you know, I copied from the best ;-)

Thank you! Great tip! ATM to backlight the knobs there's already a round white part around the hole as in the real panels. That's why I only made the 8mm hole for the (6mm) shaft in the plates so the LEDs can be placed around it 🙂

Thx!

Thank you! Here's the data I got at viperpits from Nikolas (the "P" in the special function columns shows where a stop is located): ROTARY SWITCHES Panel Control Posi- Index Special tions angle function FUEL ENG FEED 4 45 PULL STOP 1P234 STOP AUXCOMM MASTER 5 36 PULL STOP 1P234P5 STOP AUXCOMM CNI 2 36 IFF MASTER 5 36 PULL STOP 1P234P5 STOP IFF CNI 2 36 AVTR DISPSELECT 4 45 AUDIO 1 Mode 3 45 Push switch AUDIO 1 Mode 3 45 Push switch CMDS PRGM 5 36 Momentary to BIT CMDS MODE 6 30 PUSH STOP 1P2345P6 STOP EW MODE 5 36 PULL STOP 1P2P345 STOP INSTR MODE 4 30 FUELQTY SEL 6 45 Momentary to TEST AIRCOND AIR SOURCE 4 45 KY 58 MODE 4 45 KY 58 Fill Sel 8 30 PULL STOP 1P234567P8 STOP KY 58 TD 3 30 AVIONICS POWER INS 7 45 PUSH STOP 1P2P3P4P5P6P7 STOP AVIONICS POWER EGI 6 45 PUSH STOP 1P2P3 STOP AVIONICS POWER MIDS 3 45 PULL STOP 1P2P3 STOP

Neinein, gerade deine Stage 4 bestaunt, bei dir funktioniert ja alles :-D aber ich bau ja erst seit 26 jahren :-)

@@simhangar6216 noch ist der Konjunktiv angebracht 🤪 hab Herbst 2023 angefangen und ja, es zieht sich...

It's designed to work with both. Inputs are done through HID interfaces (=Joystick firmware on an Arduino), outputs are read through BMSAIT which also gives data from DCS. github.com/HummerX/BMSAIT

yes, they're in the "Master" file: makerworld.com/en/@mitschi/collections/1243270 (as in the video descriptiont stated ;-) )