F.I.R.A-----Maestri Electric Staple Gun

Подписаться 39

Просмотров 12 тыс.

50% 1

A Brief description and service of guide of the maestri electric staple guns as used by Fira Techs.
Heres the links for spares, apologies the prices appear to have gone up a little
www.spotnailslt...
and heres my link of what I do, go on please subscribe, it really helps my little channel.
/ @djfunkymike
thanks
mike

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@paulmaude1331 10 месяцев назад

So glad I found this!!! The washer inside I found had split into pieces causing loss of stapling on occasions,, thanks for this now I can sort this very easily now,,, legend thanks...

@thefunkymikeexperience.3570 10 месяцев назад

Hi, glad it helped. few years ago now and my gun is still going strong. Mkke

@blairmmackinnon5808 3 года назад

This was really helpful and I enjoyed it. You should make more videos like this. All the best.

@thefunkymikeexperience.3570 3 года назад

Thanks for the comment

@matthewmclaughlin7472 2 года назад

I’ve just looked at this video as mine is playing up. Firing and then stopping. It’s the switch getting stuck I found. 👍 great video. Really helped me out.

@thefunkymikeexperience.3570 2 года назад

Hi glad it helped, great staple guns. Mike

@rayteagle5866 Год назад

how did you repair the white switch? as my white switch has lost its return ability

@matthewmclaughlin7472 Год назад

@@rayteagle5866 I just ordered another switch. I searched ME606 switch, Checked it was right code, has a little code/number on it. Old one Should just pull out and then put a new one in.

@cronut7113 Месяц назад

The blade on my maestri gun is stuck forwards, ive taken it apart but i can't remove it from the magnets. How can i release it?

@drornadav2064 Год назад

hi mate thanks for bringing this video, dose the mechanism fit all the Maestri model? Have the 606.

@Djfunkymike Год назад

Hi yes they are all the same apart from the blades and spacers for them, mike

@lewissmith386 6 месяцев назад

I’ve just bought a new one, I went for one that didn’t say “3second delay” but it’s turned up and has 3 second delay. Can I remove the delay switch? Because I don’t have time for that

@jasonmartin7290 10 месяцев назад

Hi funkymike my staple gun when I fire it the front plate keeps falling off the pin going through the metal clip on front is slightly can i buy this part and do you know the part number cheers j

@stephend3981 Год назад

Looking to purchase one of these to install seat covers on motorcycles! Any idea if it is upto the job?

@cronut7113 Месяц назад

Yes

@strummer6642 Год назад

Great video, do you find the guns fire the staples/brads flush with the timbers surface, and would you recommend them?

@thefunkymikeexperience.3570 Год назад

hi, with a bit of practice getting the right pressure yes.

@burakkekec616 9 месяцев назад

Hey I have the same gun and I’ve taken it apart because it wasn’t firing consistently I’m noticing that the switch is not returning to position after being pushed to fire do you know where I can get a replacement switch?

@Djfunkymike 9 месяцев назад

Hi, if you look closely at it, you will see a part number, its a generic switch so ebay or rs components will have one. Mike

@burakkekec616 9 месяцев назад

Thanks!

@user-rs5uz3zx9p 8 месяцев назад

hi is there a way of knowing if the circuit board isnt working ?

@Djfunkymike 8 месяцев назад

Hi, it's a simple board, so you could either use a multimeter or get someone to check it, but easy to replace and proberly the cheaper option, I would say the switch itself would fail before the board unless its been shorted. Mike

@donnamariesnails2361 3 года назад

whats the model of the staple you were repairing please? Im looking for a electric stapler for upholstery .. im keen on the maestri but unsure on what model to buy ?

@lotlot 3 года назад

It’s the ME3G/71 I’ve just bought one from H Webber & Sons, in Dorking who were very helpful. I bought 10mm and 12mm staples from them too.

@scottbarnard6259 Год назад

Hi. I’m a carpet fitter and have had my 606 repaired several times by an independent flooring wholesalers who does in-house repairs but the problem keeps occurring. The issue that keeps happening is after 3-4 staples are fired the gun jams and the plate moves with 2-3 staples being jammed between the plate. I’ve dis-assembled my gun and the only fault I think I recognise is the blade. Mine is not broken but seems to have a lot of movement where it’s bolted in. Before the gun was taken apart I looked at the blade and it sits to one side more then the other like it’s loose ( the place where it hits the staples). My questions are 1. Is there suppose to be much or any movement from where the blade is bolted in at the top? 2.if there is movement how much as it feels quite loose and I don’t believe that’s correct. 3. How do I tighten up the bolts holding the blade at the top of the gun as the bolts are tiny? Thanks for the video also, I’m sure you’ve helped a lot of carpet fitters with it.

@thefunkymikeexperience.3570 Год назад

Hi Scott, shame your having an issue, they are simple machines, 3 things you need to look at, 1 is there a metal washer type thing that sits under the rubber bung, it sort of guides the blade, or it could be broken, 2 as you say the blade could be bent, 3 the staple carrier at the rear of the run, below the cable, is it fitted correctly and inline, if your looking from the rear, it should be on the right side of the molded handle and it either has a little plastic spacer or its molded onto the case, depending how old it is, its approx 4mm in size. your questions, 1 yes the blase moves as only held in with a split pin, hence the washer to guide it. 2 again yes it is loose, as mentioned above 3 as mentioned its a split pin, unless of course they have changed it. also i take it you have the correct staples, and sometimes a squirt of lube on the staples and carriers help. Hope that helps, let me know mike

@danielboomer5356 3 года назад

Hi can I have the link for the blade repair kit please

@andrewhunt4532 Год назад

Just a quick question sir I'm just a beginner I'm fitting my own carpet on the stairs will this machine work on carpet

@thefunkymikeexperience.3570 Год назад

Hi, absolutely it works really well, I've used it for the same, mike

@YokiFux Год назад

I have staples 606/12 I need them shorter .where can I buy them.

@Djfunkymike Год назад

Hi, easiest place I found is ebay. But most upholstery supplied carry them.

@rayteagle5866 Год назад

how do you repair the white switch? mine has lost its return abilty

@Djfunkymike Год назад

Hi if you unplug it( take a picture before for wire reference) and go onto any component website like RS components or ebay too, there's a number on the switch, only cost a few quid to replace. Mike

@patricklinyard1119 3 года назад

What sort of power does this gun have? Is it adjustable as I recover pool table cushions.

@Djfunkymike 3 года назад

Hi use it for upholstery and constantly stapling into beech rails, works fine, also done a few plastic motorbike seats and no issues.

@Djfunkymike 3 года назад

And no not adjustable

@TOMBSTONESTAN 2 года назад

Mine now and then fires 4 or five staples like a machine gun.

@thefunkymikeexperience.3570 2 года назад

What do you mean, I it faulty

@TOMBSTONESTAN 2 года назад

@@thefunkymikeexperience.3570 Yes it's faulty. Fires several staples with a single pull of the trigger? Wondered if you knew a fix?

@Djfunkymike 2 года назад

@@TOMBSTONESTAN yes sounds like the staple blade is either bent or broken. Take the front plate off and have a look, remove the staples first, as you have to fire it to see, I assume you have the right staples?