Fabricating a Canoe Motor Mount (and Test Drive) 

Thanks Sneaky Z! Despite the so so production values this is one of the best videos I could find on this particular build(there’s a lot of them). I’m about to begin my own install as well and I wanted some more info regarding extending the power lines so I can install the battery in the bow for ballast. You addressed this issue perfectly 👌 I also have to salute your bravery in testing an unrestrained open terminal battery in an aluminum boat⚡️Good show, man!

I’ve been thinking about mounting mine on the end of the V. Have to get mine down and see what’s comfortable.

Good job! Ill be doing the same thing. Thanks!

Been there,done that! They turn great to the right,but poorly to the left! Motor needs to be mounted on centerline of boat to track properly. Currently planning an air canoe. This will be my 2nd air canoe build, first was 6.5 up with 24 inch prop... New build will have a 225cc 2 stroke with a 32 inch prop. Will work so much better in Lilly pads and swamp grass.

Pretty Cool 👍

pretty cool, have fun that's what life is about.

far be it from me to mention this but no one else has yet. Bein experimental, maybe throw something that floats on board. If you have a few seconds you can always dump the beer outta the cooler and keep the lid tight.

I would of used square "C' clamps ,for the cross piece,and used the holes already there. Saving a lot of time. Also, you were running the canoe "Stern" forward, instead of the "Bow"

Good on ya'!

How straight does the canoe stay with it mounted on the side?

Nice. I'm about to do a similar setup but for a 17ft rowboat. I'm wondering whether to go up to 55lb or if that'd just be overkill? How much run time (or distance?) are you getting off your 100 Ah battery?

Nice project but two thoughts on your video. First, get more light in your work area. You were back lit and it was very dark and hard to see what you were doing. Any old light would help. You can even get a cheap clamp light at a department store. You know the kind, spring clamp that can clip to a thin shelf or pole and then on the other end there’s a small conical shade to direct the light. Some are just the clip and light and others have a flex shaft. Second, for your pond video, set up a camera on the shoreline then you can go past at the different speeds and it will be much easier and obvious for us viewers to see how well it’s working. Just a few thoughts, free advice as it were, weather you use them or not is up to you. I blame any or all improper words on spellcheck. You have a great day.

Turn the the endless music down, what?!

I like the idea of the canoe with the murder but I'm thinking about a two-stroke motor for my canoe what do you think will it be too fast

Or - 2 pieces of wood, loosely joined by rope/zip ties. Clamp motor directly to hull - power is closer to centerline.

I have a good ol 50 year old aluminum boat im gonna put a 30 on. What does your boat weigh?

Building mine right now. But making outriggers for it, cause swimming and losing the gear, no thanks. Cool vid, cheers.

You installed it on the front…..whoops

Nice. Build, but the music was so loud I couldn't hear you speaking. :)

13:41 what was that lmao

How long can you run on medium to low with that battery that’s a lithium ion battery?

looks like you mounted the motor mount to the front (bow of the boat). oops.... Cool idea though!

What were you thinking? Music played over talking? Seriously?

Shame about the music

I guess even having to sit with his legs over the foward thwart still didnt register that hes operating from the front of the canoe...not the brightest star in the night sky... is he?

every self-respecting Ohio-Boy needs to own a Gruman Canoe w motor atleast once in his life....or we deport them.

Wrong end of the boat man

Hi content was good but watching the video made me sick and I wasn’t even in the canoe Please keep the camera still

The mount is on the wrong end of the canoe