In this video, we will troubleshoot my axis amplifiers, replace the one that is bad, and follow the procedure to tune it in the machine. See the below links for things referenced in the video.
Tools:
1. 1/4" Drive Ratchet
2. About a 10" extension for ratchet
3. 1/4" Socket
4. Phillips drive bit
5. Phillips head screwdriver
6. Flathead screwdriver
7. Lighting to see in cabinet
8. Small flat screwdriver for tuning pots
***************************************
Fadal Manuals (Thanks to CNCPros):
***************************************
CNCPros Website:
www.cncpros.com/
CNCPros Technical Docs:
www.cncpros.co...
***************************************
Fadal Facebook Group:
/ 1628752910692236
***************************************
5 окт 2024