Falcon Controller Build Part-3: Installing Power Components 

Third video in a series on how-to do a Falcon controller build with a Bud Box enclosure. When complete the controller will consist of a Falcon F16v3 plus 2 extensions providing 48 pixel ports. In this video I install the power supply, fuse box, and Ethernet surge protectors.
Materials
JDEation Kit; Design ID: 4Q6USYKE
Meanwell 350LRS-12 (purchased from Holiday Lighting)
#10-24x2 1/2" bolts Qtyx4 (purchased BoltDepot)
#10-24 locking hex nuts Qtyx4 (purchased from JDEation)
#10 flat washers Qtyx4 (purchased from BoltDepot)
WUPP 12 Volt Fuse Block, Waterproof Boat Fuse Panel (purchased from Amazon)
#8-32 1 1/2 Bolts Qtyx4 (purchased from Home Depot)
#8-32 hex nuts x4 (purchased from Home Depot)
#8 locking washers Qtyx4 (purchased from Home Depot)
Bus bar for ground
#6-32 3/4in Round head combo bolts Qtyx2 (purchased from Home Depot)
#6-32 hex nuts Qtyx2 (purchased from Home Depot)
APC Surge Protector for Ethernet Data Port (10/100/1000 Base-T Ethernet lines), ProtectNet (PNET1GB) (Amazon) x2
#8 locking washers Qtyx2 (purchased from Home Depot)
#8-32 1 in Bolts Qtyx2 (purchased from Home Depot)
#8-32 hex nuts Qtyx2 (purchased from Home Depot)
Blue Spades Terminals
Tools
Power Drill
Assorted drill bits
Wire Cutters
Crimping Tool
Phillips screw driver
Wire Strippers