Faster！But How Much Faster? SUCLPFUN S30 5W 10W 20W Laser Cutting Efficiency Comparison Test

Подписаться 19 тыс.

Просмотров 36 тыс.

50% 1

SCULPFUN S9 Thick Sheet Cutting Test and Cutting Recommendations : • SCULPFUN S9 Thick Shee...
As we all know, the Sculpfun S30 Series has three models:
S30 5W, S30 Pro 10W and S30 Pro Max 20W.
👉Purchase the Machine on Sculpfun Official Website: bit.ly/3ZDXd1j👈
📣How do these three models perform on 11mm Acrylic, 10mm Plywood and 15mm Wood? How many passes?
📣What's the difference between them and the S9?
📣Does turning ON air assist help cutting efficiency?
Let's find out in the video!
--------------------------------
Do you like the video?
What tutorial video would you like to see next time? Please tell us in the comment section. 👍
If you like the video please click "👍".
Subscribe us for more videos!
-----------------------------------
❤️Purchase links For S30 5W❤️
▷TOMTOP: www.tomtop.com/p-os6676eu.html
▷Geek buying: www.geekbuying.com/item/SCULP... (Coupon code:SCULPFUNS30)
▷Aliexpress: www.aliexpress.com/item/10050... (Global delivery)
▷Allegro (Poland&European countries): allegro.pl/oferta/12652055865
▷Banggood (Global delivery):
www.banggood.com/SCULPFUN-S30...
▷Alibaba.com (Low batch price & Global Shipping): www.alibaba.com/product-detai...
▷Amazon (US&EU warehouse & fast delivery): amzn.to/3hqtjNu
（10%off: 109NVKJZ）
▷NewEgg (US): www.newegg.com/Product/Produc...
▷SCULPFUN official website:
sculpfun.com/collections/scul...
▷Amazon (US): amz.run/66dB
▷Amazon (US): amz.run/66d5
❤️Purchase links For S30 Pro 10W❤️
▷Geek buying: www.geekbuying.com/item/SCULP...
(Coupon code:SCULPFUNS30P)
▷Aliexpress: www.aliexpress.com/item/10050...
▷TOMTOP: www.tomtop.com/p-os6677eu.html
▷Allegro (Poland&European countries): allegro.pl/oferta/12652101846
▷Banggood (Global delivery):
www.banggood.com/SCULPFUN-S30...
▷Alibaba.com (Low batch price & Global Shipping): www.alibaba.com/product-detai...
▷Amazon(US&EU warehouse & fast delivery): amzn.to/3WGUgg9
(7%off code :07X27EMV）
▷NewEgg (US): www.newegg.com/Product/Produc...
▷SCULPFUN official website:
sculpfun.com/collections/scul...
▷Amazon (US): amz.run/66d7
▷Amazon (US): amz.run/66dC
❤️Purchase links For S30 Pro Max 20W❤️
▷Aliexpress: www.aliexpress.com/item/10050...
▷Geek buying: www.geekbuying.com/item/SCULP...
(Coupon code:SCULPFUNS30PM)
▷TOMTOP: www.tomtop.com/p-os6678eu.html
▷Allegro (Poland&European countries): allegro.pl/oferta/12652136180
▷Banggood (Global delivery):
www.banggood.com/SCULPFUN-S30...
▷Alibaba.com (Low batch price & Global Shipping): www.alibaba.com/product-detai...
▷Amazon (US&EU warehouse & fast delivery) : amzn.to/3NPkzwH
（15%off code :15CDGTVJ）
▷NewEgg (US): www.newegg.com/Product/Produc...
▷SCULPFUN official website:
sculpfun.com/collections/scul...
▷ebay (EU):
www.ebay.de/itm/ws/eBayISAPI....
------------------------------------------------------------
👉Facebook： / sculpfunofficial
👉Facebook Official Group：bit.ly/42q5rwO
👉TikTok: bit.ly/3lKPdgZ (@sculpfunreal)
👉Official Website: bit.ly/3ZDXd1j
👉Instagram： / sculpfunofficial
👉Twitter: / sculpfuntech
----------------------------------------------------------------
Other videos in our channel you might be interested in:
👉SCULPFUN S9 Thick Sheet Cutting Test and Cutting Recommendations:
• SCULPFUN S9 Thick Shee...
👉SCULPFUN S30 Series Instructions for First Use & New Function Tutorial | 20W | Installation Tutorial
• SCULPFUN S30 Series In...
👉Three things you should know about air assist（For SCULPFUN S10）| Air Assist | 10w:
• Three things you shoul...
👉Six Amazing Projects Using SCULPFUN S9 Laser, happy laser making at home:
• Six Amazing Projects U...
#efficiency
#sculpfun
#lasercutter
#laserengraver
#laserengraving
#sculpfuns9
#sculpfuns30
#sculpfuns30series
#cuttingtest
#lightburn
------------
0:00 11mm Acrylic cutting
4:48 10mm Plywood cutting
8:03 15mm wood cutting
10:48 3.5mm Acrylic's fastest cutting speed

Наука

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@fayasma999 Год назад

Very helpfull comparison video Thanks team 🥰

@SCULPFUNReal Год назад

😆Thank you!

@SCULPFUNReal Год назад

The test content is for reference only. Even though I think low -speed and high -power cutting can help improve efficiency, other users have different opinions (facebook.com/100003711190929/videos/934541061285298/?idorvanity). Please judge and select the appropriate cutting method by yourself. Subscribe us for more videos! ❤

@emilyl1006 Год назад

Amazing video👍

@SCULPFUNReal Год назад

@DoctrinePolice Год назад

Very helpful. Which version of LightBurn is most suitable for the S30 Pro Max 20W?

@michaelainsworth627 6 месяцев назад

I just ordered the s30 pro 10 w and was wondering what are good safety glasses to go with it??

@cosygame8736 Год назад

The best info for us! 🙏 Good job! #SCULPFUNTHEBEST

@SCULPFUNReal Год назад

😆Thank you!

@jorgedelafuentemaganto Год назад

Hello, I would like to know if I can cut 12mm thick cream-colored PMMA with the 20W model. Thanks.

@TheKev011 18 дней назад

superb video thank you for all this information, ps: without the music it would have been perfect ;)

@quetzalcoatlhermeticus8024 Год назад

How does sculpfun s30 pro max cool itself down? And is it possible to do low production with him?

@user-cl3iu9lr1o 11 месяцев назад

What is the best machine pls and didi the S30 ultra 33w is best machine in market?????

@vladimir7370 7 месяцев назад

is sculpfun S30 pro laser head compatible with atomstack A10 pro ? can i instal this head on atomstack a10pro?

@LongHairPat 3 месяца назад

My 5W that I got second hand, doesn’t give me anywhere near this performance. What do you recommend?

@marthacruz6472 Год назад

Que puede opinar en comparativa entre la s30 pro y la s10 ?

@paullaus8295 Год назад

I have the 20w and love it 😁

@SCULPFUNReal Год назад

Yeah~~~

@MejazMejazMejazMejaz-fn7yd 10 месяцев назад

Price 20watt

@achemxe 10 месяцев назад

Saludos de nuevo se que es mucho pedir, por favor estos vídeos de configuración los pueden subtitular al español, je je gracias

@corretor-giliardi Год назад

quanto tempo dura o laser ?

@kilumnati Год назад

I think for me would love to try the 10w version I think thats the sweet spot for me to use

@SCULPFUNReal Год назад

Yeah! 10w is great too!

@diymaker7047 Год назад

Cool！！

@SCULPFUNReal Год назад

😝😝

@cosygame8736 Год назад

For the New S30 Ultra series a video like this, when?❤

@ChuyR. 8 месяцев назад

can it cut clear acrylic? or does it only cut black acrylic?, sorry for the question it might sound naive but i honestly curious

@SCULPFUNReal 8 месяцев назад

All the diode laser engravers can't cut clear acrylic.

@SalvadorCarmona-ct9bd 4 месяца назад

¿Cuál es el mayor grosor que corta el laser de 22w?

@piotrdivineacoustics5754 Год назад

The best cutting parameters for 3mm black cast acrylic to have best cutting surface quality for 20W Pro Max are: speed 140mm/min, 1 pass, power 19%, air assist off!

@user-hl9pi6lu1n Год назад

why？Why is the laser power so low？ Is your speed parameter written the wrong unit?

@piotrdivineacoustics5754 Год назад

@@user-hl9pi6lu1n if you do the cutting test like in the movie you show "just" capabilities of power and speed. For real work when you require quality and repeatability of the parts, you have to also consider how thick is the cutting gap and what happens at the bottom of the cutted part. When you add more power to acrylic cutting you'll have wider gap and some burns at the bottom side. Speeding up from 140mm/min to just 200mm/min requires of using 50% of power - that lowers the cutting quality. So in my opinion the best results for any materiał is to set the proper speed for the lowest power capable to cut through. Then you have the thinest gap and the best quality. Acrylic 3mm is 140mm/min 19%power and acrylic 6mm is 70mm/min 72%power, both 1pass, both no air assist. Overall the 20W pro max laser cuts very wide gaps, much more wider than 5W laser, so you have to also consider this parameter.

@user-hl9pi6lu1n Год назад

@@piotrdivineacoustics5754 Sorry, my English is not very good. I can't fully understand what you mean. First of all, low speed cutting or air assisted cutting will make the cutting surface effect of acrylic look poor. However, the test in the video is only conducted from the perspective of efficiency. Second, the "just finished cutting" in the video is only for testing. In actual work, it is necessary to adjust the speed and pass count according to the drawing difficulty and material thickness. If you want to cut the surface perfectly, you really need to increase the speed or reduce the power. Third, the default upper limit speed of 20W is 100 mm/s. Since the 20W laser is heavy, it is not recommended to lift this limit. Your 140mm/s, are you sure it is mm/s, not mm/min

@piotrdivineacoustics5754 Год назад

@@user-hl9pi6lu1n you are correct, its milimeters per minutes, not per seconds😉🙂🖖😎

@thanatosor 8 месяцев назад

@@piotrdivineacoustics5754does this mean S10 is sufficient for cutting those 3-6-9-15mm plywood ? And by 10w+ power, it’s more than enough ?

@BHorst.BHorsty Год назад

When will Wifi- and Bluetooth-Connection be available on my S30 5W😭. Bought the machine cause it was advertised 😞😭

@diymaker7047 Год назад

wow！！！😮😮

@SCULPFUNReal Год назад

@RTSFoto Год назад

We are sorry to tell you that due to the Postal Restrictions , your order for SCULPFUN S30 Pro 10W Laser Engraver Cutter is not able to be shipped to the United Kingdom. Just wondered has anyone else had a similar message from Banggood.

@ColinWatters Месяц назад

Yes. Sadly I found other suppliers are more expensive.

@ednelsondiih1043 Год назад

como fazer um upgrade na S9? sinto ela fraca, queria saber se é possivel colocar a 10w ou 20w

@SCULPFUNReal Год назад

Yes! We will release the 22w&33w laser module for S9! Please join the FB group for more info：bit.ly/42q5rwO

@NEWCARTOON-2024 6 месяцев назад

Very Helpfull thankyou

@MejazMejazMejazMejaz-fn7yd 10 месяцев назад

Price plz

@isairamossoto9948 Год назад

I just buyed the s30 pro , but can't cut Even 3 mm mdf, for 9mm what settings would You use?

@user-hl9pi6lu1n Год назад

7mm/s（420mm/min） 100% 3 pass maybe

@isairamossoto9948 Год назад

@@user-hl9pi6lu1n i'll try, it is a trial and error learning curve, but, at the end it works and it's satisfying, i just succesfully cutted 3 mm mdf, with a 700 mm/min 70% 3 pases air on config, i'll keep trying for thicker material

@davidcorbag237 Год назад

better share the parameter settings and solved me lot of questions!!!

@SCULPFUNReal Год назад

🥰😘

@derekjenkinson8014 Год назад

What was the 15mm wood? I can’t quite make out what you call it.

@SCULPFUNReal Год назад

balsa wood

@user-hl9pi6lu1n Год назад

泡桐木（paulownia wood）You can find the same material in Amazon

@TheCartoons4you Год назад

Do you have to pay for customs in US?

@SCULPFUNReal Год назад

We have overseas warehouses in the United States

@andylau8961 Год назад

🎉🎉🎉

@SCULPFUNReal Год назад

😜

@kr3l Год назад

I really like the Sculpfun S30 pro max. I just bought it, but I don't like its rotary system. I wanted to know if it is compatible with xTool RA2 Pro

@SCULPFUNReal Год назад

We will make the new rotary rolly soon~

@todd636 Год назад

What is the difference between 10w S10 for $470 and 10 w S30 pro with air assist for $510? The S30 seems like a much better deal. I must be missing something.

@SCULPFUNReal Год назад

S30 pro 10W, with automatic air-assisted air pump, limit switch, linear guide rail in the package, can upgrade the Y extension axis, can upgrade the XY extension axis, can replace the lens, and one replacement lens is included in the package too. ----- S10 10W, you need to buy an air pump (manual), it has a linear guide, you need to buy a limit switch if you need. You can upgrade the Y extension axis, you can upgrade the XY extension axis. And there is no replacement lens in the package. Can be upgraded to automatic air assist (need to purchase matching motherboard and air pump) ----- We will launch a new model soon, please join the group for details：facebook.com/groups/sculptfunusers

@davidcorbag237 Год назад

20W is more powerful and fast than 5 or 10W , I would like to try it

@SCULPFUNReal Год назад

😊

@evertonmartins4850 Год назад

Can i upgrade my s9 to s30 20w?

@MrDonrecardo 8 месяцев назад

yes

@rodolfoperez9660 Год назад

20W laser is compatible with S9 model? If yes, what is the price of 20W laser

@SCULPFUNReal Год назад

Sorry, 20w laser head can't match the S9 machine.

@user-hl9pi6lu1n Год назад

20W laser has not been listed yet

@user-hl9pi6lu1n Год назад

Even if we have it, we don’t recommend putting 20W laser on S9 for high -speed carving work

@user-hl9pi6lu1n Год назад

Low -speed cutting should be fine

@jaymakes Год назад

Is it possible to upgrade my 5w s30 to 10w? Thanks.

@SCULPFUNReal Год назад

Of course, we have S30 Pro 10w laser module! bit.ly/3ZDXd1j

@jaymakes Год назад

@@SCULPFUNReal thanks for your response. I am wanting to know if I can replace just the 5w laser to a 10w onto my s30 frame?

@SCULPFUNReal Год назад

@@jaymakes Yes sure, just puchase the S30 pro laser module will be fine.

@markosrebernjak1175 Год назад

Is it possible to upgrade s30pro (10w) to 20w from s30pro max?

@OscarDaFish Год назад

Unfortunately, no. The 10w is 12v the 20w is 24v. Fell for the same catch.

@markosrebernjak1175 Год назад

@@OscarDaFish Thanks.

@SCULPFUNReal Год назад

@@OscarDaFish 👍

@OscarDaFish Год назад

@@markosrebernjak1175 I bought the 10W initially hoping that I could upgrade to the 20W later. That's when I realised you couldn't. :(

@anabel1488ify Год назад

@@OscarDaFish So, 10w from S10 is the same to 10w from S30Pro ?

@thanatosor 8 месяцев назад

Now I think my prev S9 was too weak to cut anything but thin paper 😂

@tech4unepal Год назад

I want sculpfun s30 pro iam from saudi arabia

@SCULPFUNReal Год назад

Try these: ▷SCULPFUN official website: sculpfun.com/collections/sculpfun-s30/products/sculpfun-s30-pro-automatic-air-assist-laser-engraving-machine-10w ▷Aliexpress: www.aliexpress.com/item/1005004749830652.html

@MejazMejazMejazMejaz-fn7yd 10 месяцев назад

20watt

@sigh_of_the_times 11 месяцев назад

Just a heads up I gave you a thumbs down to get your attention. The video is great but the music is the back ground is to high and obnoxious you might want to deal with that.

@BHorst.BHorsty Год назад

When will Wifi- and Bluetooth-Connection be available on my S30 5W😭. Bought the machine cause it was advertised 😞😭