Fault 7 Cooker Oven overheats and burns eveything

Подписаться 136 тыс.

Просмотров 7 тыс.

50% 1

The Cooker or Oven overheats and burns everything, in this video, we will look at
1 Faulty Thermostats
2 Faulty NTC sensors
3 Damaged or faulty PCB's printed circuit boards
4 How Cooker and Oven Thermostats & NTC sensors work
▶More Cooker and Oven videos
ru-vid.com...
🛒 Cooker & Oven Thermostats
www.how-to-repair.com/help/se...
🛒 Cooker and oven NTC Sensors
www.how-to-repair.com/help/se...
🛒 Cooker and Oven PCB's printed circuit boards
www.how-to-repair.com/help/se...
Please remember to subscribe to our channel and click on the bell notification to get reminders
ru-vid.com?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
RU-vid. / apart4u
Facebook. / how.to.repair.appliances
0:00 - INTRO
0:40 - FINDING YOUR OVEN THERMOSTAT MODEL NUMBER
1:41 - OVEN OVERHEATS & NOT CONTROLLING TEMPERATURE FIND OUT WHY
2:39 - OVEN BURNS THE FOOD
2:58 - HOW A COOKER THERMOSTAT WORKS
3:54 - HOW COOKER NTC SENSORS WORK
6:00 - OVEN THERMOSTAT TESTING
7:16 - OVEN NTC SENSOR OHM'STESTING
8:13 - HOW COOKER & OVEN PCB'S PRINTED CIRCUIT BOARDS WORK WITH NTC SENSORS

Хобби

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@sammoore5011 7 месяцев назад

Hi Paul love the videos .just one observation I made.you kept referring to the electronic temp sensor as an NTC .The sensor would be a PTC sensor.If the resistance goes up when applying heat it is a PTC sensor.If resistance goes down when heated it is a NTC type .not trying to be smart just letting others know the difference. Keep up the great work as the vids are very informative. Thanks again.🖒

@rscelectrical7091 2 года назад

Great video as always Paul, you lay things out simply enough that anyone can understand them 👍. I've been in the industry a long time, but still find your videos enjoyable.

@How-to-repair 2 года назад

I feel slightly humbled, I've always tried to make the videos in a way that the general public can understand sometimes I do think I'm getting to Tekky though

@nihadsarajkic2807 2 года назад

Very educative and good video. Hello from Bosnia and Herzegovina

@How-to-repair Год назад

Hello there frow wales glad it helped! Thank you For leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@paulb9769 2 года назад

Hi there thank for your videos they have been helpful. I have an odd one. Replaced a customers fan element she called back to say the thermostat was not working. I discovered current between the plug going into it and the chassis. Is it possible that a short could be bypassing the switch completely? It is the older type of thermostat not ntc.

@How-to-repair 2 года назад

Could be selector switch problem We now have Live Q@A's weekly on our live show, see our home page ru-vid.com for the next date

@kevinhilton5844 9 месяцев назад

I have a baumatic oven which started overheating, the thermostat light goes out as it should do but the oven continues to heat when the oven is set to fan with top and bottom elements but seems to work if just set to bottom element and fan. I've replaced thermostat just to test and made no difference. If left it will heat up to the extenet that the whole oven turns off until it cools.

@kevinhilton5844 9 месяцев назад

It's a baumatic BODM984X/e if that helps

@education9135 Месяц назад

The kelvinator single stove gets on and bakes and after some time it switch off by itself, then after some time it switch on again , what might the problem

@How-to-repair Месяц назад

You described it a little bit better here and I understand what is going on a little bit better if the oven is cutting out completely and then coming back on say 20 minutes later this may be a thermostat called a safety cut out kicking in for safety reasons of course this might be because the cavity between the inner oven and the outer oven is getting too hot. You might want to check, if the cooling fan system inside this cavity is working if fitted as I do not have the model or wiring diagram I'm unable to know all the components in the oven

@Kyle-rj8gi 2 года назад

I had a friend who’s oven glass door smashed , he then got replacement glass for it and it happened smashes again. I noticed the element was flush with the door once closed, so the element would be touching the glass I don’t know how that’s possible. Do you you think that’s a possible cause ?

@How-to-repair 2 года назад

I have seen this happen a few times it is normally when the wire shelf or any cooking tray is touching the glass the transfer of the heat sometimes causes this problem

@Kyle-rj8gi 2 года назад

@@How-to-repair ah I never even thought of that. Thanks il bare that in mind for the future 👍🏻 🪛

@education9135 Месяц назад

Again the kelvinator single stove plates have the same heat at setting of 1,2,3,4 but 5, 6 they get hot why.

@How-to-repair Месяц назад

again without the model I do not know which thermostats are controlling the hob plates the old type system used to just heat different coils so 1234 for example would only be using the inner coil but 56 maybe using two coils again without the model number and knowing what type of thermostats are in this? It is very difficult for me to answer. Feel free to use the contact page on the website with all the relevant information.

@artstech Год назад

I have a 9 year old GE Profile oven and the control board (relay) is faulty. The part is around $300 but guess what? It is no longer available and discontinued. So now I need to buy a new oven.

@How-to-repair Год назад

Sometimes it can be just a relay on the circuit board so it's worth inspecting them but you may also find it helpful to put your model number into the likes of eBay and see if anyone has a secondhand board for sale. Hope you had a good New Year please remember to subscribe to the channel as that helps us. glad we could help you @artstech this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@education9135 Месяц назад

Why didn't u test the thermostat the same as the NTC sensor

@How-to-repair Месяц назад

if I am understanding the question correctly the thermostat is a set of points which cut in and cut out at a certain temperature. The NTC sensor does not physically control anything it only sends an ohms reading to the device that is attached to then there is normally a relay that will control whatever it is controlling. I hope this helps you @education9135 please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍