Favorite Install: Motorcycle SaddleBag LED Latch Lightz Custom Dynamics Lights bright plug n play

Просмотров 44 тыс.

% 1 017

Custom Dynamics Plug & Play Saddlebag LED Latch Lightz for your H-D Touring bike! Adds visibility & style to your bags!
Before we left off for our Kick-Off 2020 ride, Chad at Denney's H-D installed the Latch Lightz which are a direct Plug & Play replacement for your OEM saddlebag defectors. The Latch Lights have 81 super bright dual intensity red LED's & increases your visibility from the side greatly!!
Best part... functions as Run/Turn or Run/Brake/Turn
Share this video with a RU-vidr friend:
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tX7dijmL0AA.html
Watch one of our most recent uploads about the Custom Dynamics Fascia LED Panels: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AyEyV0-CPtI.html
🟢JOIN & become a MEMBER ru-vid.com/show-UC6_Pld2GvkbQ8d_Pfg45CFgjoin
🔵 SUBSCRIBE & SUPPORT channel: ru-vid.com
📱Let’s Connect!! 📱
Facebook: bit.ly/2nWXuA4
Instagram: bit.ly/2ovUpHB
Twitter: the_ornery_one
Website: www.theorneryone.com
🧢 Buy Ornery Merch (Shirts, Bags, Patches, Stickers, etc) here:
bit.ly/2nVhtz8
📫 SEND US FAN MAIL:
The Ornery One
P.O. Box 1692
Harrison, AR 72602
Our Motorcycle:
2019 Road Glide Special (Industrial Denim Gray) with Stage 2
* Mk 4.5 s&s mufflers 1801-1077
* Screamin' eagle torque cam kit #92500074 video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mwaTxGXCe4A.html
* Screamin' eagle extreme flow air cleaner #29400357
* Screamin' eagle pro street tuner #41000008c
* Screamin' eagle smart tune pro #41000445
* Screamin eagle extreme flow 55mm intake manifold #27300167 video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZC6JU37HsWE.html
* Primary Vent Kit video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l8g4xxXNuus.html
* Legend Suspension RevoA shocks video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rNpWtteLdCQ.html
Lights:
* Custom Dynamics Amber/White ProBEAM Front Turn Signals
* Custom Dynamics Red/Red ProBEAM® Rear Turn Signals video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-L2hPhNQ2Qqw.html
* Custom Dynamics NEW Low Profile Bag Lights
* Custom Dynamics Dual Intensity TriBAR Light
* Custom Dynamics TruBEAM Road Glide Headlight
* Custom Dynamics Magic Strobes™ RSG
* Custom Dynamics LED Dynamic Windshield Trim video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FZ4vvHZ2fv0.html
* Custom Dynamics ProBeam® Motorcycle LED Halo Fog Lamps video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TE57gp-hEQc.html
* Custom Dynamics Fascia LED Panels video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AyEyV0-CPtI.html
* Custom Dynamics Latch Lightz
* Custom Dynamic Magical Wizards Body lights
Accessories:
Memphis Shades 6" Spoiler Windshield video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eeCmdsEQzYw.html
Memphis Shades HandGuards video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9k-PiMu8cxc.html
Kuryakyn Phone Mount
RickRak Gas Kap Keeper
RickRak GoPro Mount video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-meLRq8A7EGg.html
RickRak Top Dekk II Luggage video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VE17jfi3FxA.html
Mustang Deluxe Touring Seat
AdvanBlack King Tour Pack
Singletrack Street Grim Tool Roll
Arai Regent X Helmet
Sena 10C Evo Action Camera
Viking Cycle Motorcycle Rain suits
Want to become an ORNERY ASS? A member of the Ornery One? JOIN our membership program here on RU-vid! For more information click here bit.ly/35J63Pw

Опубликовано:

3 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@mikerichardson3017 4 месяца назад

Ok, for those asking about the hole and grommet on the latch side. Just get the extra 3 wire grommet from CD and use it. The hole does seems larger than the one in the video, but it will work and is not really too large. I did mine that way and in worked just fine. Hope this helps.

@ocglide2566 4 года назад

I agree as well, I have Custom Dynamics all over my RGS. I purchased the windshield trim LED's from Revzilla and the screws were missing from the package so I called Revzilla and they wanted me to return everything and wait at least 10 days to get a new one when all I needed was the screws so I called Custom Dynamics directly and they sent me the screws, Very nice people and great support.

@TheOrneryOne 4 года назад

That is awesome! I mean that sucks that RevZilla did that but so proud to hear that about Custom Dynamics!! They truly have their customers back!!

@ocglide2566 4 года назад

I don’t blame Revzilla it’s the process for a return I just didn’t want to wait so I called Custom Dynamics and they sent me the screws at no cost. They made a believer out of me and I will recommend them to everyone.

@OZARKSHDRIDERS 4 года назад

Chad done an awesome install on the lighting, and it's pretty cool how they flash with the brake and lights up the side's of the bike I dig it man ride safe live long guys 💯✌️😎

@run4st717 4 года назад

I respect the fact you straight up say you are sponsored and you like them also. Your running them which does also say alot...Lights mean safety for you and wife. Much respect. Oh and they need to give you some swag to give away...lol ok thats just me wanting free lights. Ride safe

@Viewson2s 3 года назад

Definitely liked the video. Very clean. I will be watching more of your channel 👊🏾

@timmetcalf4869 4 года назад

You guys are awsome giving me a lot of things to buy when I go get my new Harley and have Denny’s put them on once I pick out my new Harley thanks guys

@rubenruiz2987 2 года назад

Can never enough light to be safe.Great work!

@954Lacko 4 года назад

Thanks for this video. I just received my CD Latch Lightz yesterday, and planing to install it later today - the same way you did sir.

@BamaTraveller 4 года назад

Agree on CD lights! Great company

@mikemyers6387 4 года назад

Wife and I have been talking about those. They look great

@airbrushinmotion 4 года назад

This is gonna be a must have for me! Awesome vid!

@Tredwayj 4 года назад

I put mine on last fall. They are badass. I love them. Stay Up Stay Safe.

@curtisck813 4 года назад

Good video..published on my birthday March 3rd 🤙🏾🤙🏾🤙🏾looking forward to installing some on my SG...And my future 2020 RGS!!!

@paulkucinic9619 4 года назад

Love what you've done to the bike! Looking at getting the Custom Dynamics Fascia Panels that I saw in one of your videos! Be safe brother!

@mattscheurman1616 4 года назад

What size hole and grommet did you do behind the latch (approximately 7:30 in to the video)?

@ChaseTheRide 4 года назад

Agree, they are the best lighting. Think the fact that is all the do and their dedication is huge.

@TheOrneryOne 4 года назад

They are the lighting company that we only want on our bike! The LEDs don’t look like Christmas lights for one & they have the dedication in their products

@2bad1 4 года назад

That’s a clean install

@budirwin9825 4 года назад

Truckers decking out our rigs always added "chicken lights" Nice touch

@magicmdf 3 года назад

Thanks for the video, I went with your extra grommet install it's much cleaner, they really should incorporate this method, 2 extra gromets vs that cushion should break their bank

@joewurtenberg2128 2 года назад

What size grommet did you use on the bag side??

@14theroad1955 4 года назад

Ordered a Triple Play Module for my E-Glide Standard, received the unit within 2-3 days, tried to instal but it didn't work, called Custom Dynamics who tried to troubleshoot over the phone, they couldn't get it to work either, they sent me a new part, no questions asked, installed the new part and it worked like a charm, hell, they even sent me a envelope and a shipping label so I could return the original back to them...Great customer service, for sure.

@robertjr1254 4 года назад

I run an auto repair, and guaranteed the wire ran over the edge wouldn't have lasted 2 months before these 2 edges cut that wire. Notify RI and tell them to fix the directions. I also have a 19 rg so i plan on getting these. They look badass

@marcq769 Год назад

I’m running both custom dynamics and Ciro. I like them both.

@hogboy57 3 года назад

Added those to our bikes. Really nice.

@TheOrneryOne 3 года назад

Glad you like them... they are great!

@vitovitale8098 2 года назад

Very nice looking good.

@CanadianHarleyRider 4 года назад

What size drill bit did the mechanic use for drilling the hole under the latch? I was thinking about putting a set on my bike, but didn't like how the wiring was supposed to be routed under the lid, were you brought up a good point about the wires always getting pinched.

@kirkwb 3 года назад

I wish I had seen this video before I installed my latch lights. I wired mine the prescribed way over the lip of the bag. Drilling through the bag behind the latch here is a much cleaner way to go.

@TheOrneryOne 3 года назад

It seemed like a cleaner look in our opinion but regardless... the latch lights are awesome!! One of the best accessories that we add!!

@kirkwb 3 года назад

@@TheOrneryOne I agree on both counts. I have a black FLHXS so I was worried about being seen at night. The latch lights definitely help - so much that I'm going to get the amber lights to replace the fork reflectors too. As for a cleaner look, I just picked up some plastic wire channel from the hardware store, painting it satin black, and using it for routing the wires (I also have Custom Dynamics' interior saddlebag lights) to clean things up more.

@rickyhawkins7407 4 года назад

I have CD LED lights in my rear fender, rear running, brake, signal lights, antenna hole lights, and windshield trim. I have a set of the grill lights on order and as soon as they have them back in inventory going to order a set of their latch lights. I have run their lighting for years without an issue.

@TheOrneryOne 4 года назад

That is one thing we love about their products... years without issue & the LEDs have a lifetime warranty!!

@ocglide2566 4 года назад

I purchased and installed the smoke saddlebag latch lightz over the week end, used the Denny's install tip and drilled through the bag and added a grommet to get the wire inside the bags, that was a great tip and a much cleaner install. Maybe Custom Dynamics should change the instructions and add two more grommets to the kits??

@mattscheurman1616 4 года назад

Did you use the same size grommet on the front of the bag as well? If not, what size grommet did you use?

@joewurtenberg2128 2 года назад

Also interested in what size grommet you used behind the latch.

@ericjones5753 Год назад

I totally agree…. I just bought my smoked lights and I need to find that extra grommets

@TheGoodbabies 5 месяцев назад

@@mattscheurman1616😊

@954Lacko 4 года назад

COOL!!!!

@dnkkelly 4 года назад

A little more detail on the wiring would have been nice. I have two sets to install next week.

@Walt450 2 года назад

those are bad ass te lights look good brother cant waut to do mine

@alexrubio1548 3 года назад

Nice video guys, question... Custom Dynamics suggests a 9/16 hole in the saddle bag, I think that is a bit too much? and on your video it seems a lot smaller and I will also want to to do the whole behind the latch rather than having the cable over the edge, don't think 9/16 would even fit there. What size grommet and drill bit do you suggest? Thanks!

@AC16 4 года назад

Looks great , by installing these lights can the saddlebags still come off easily or do you need to take the seat off to disconnect them?

@alexanderkoufodontis2092 4 года назад

I thought that was u man I just saw u at the gas station in st Augustine I had the blue Electra glide damn was in such a rush to get back to work

@jameswilbur1273 Месяц назад

Im going to add the latch lights, also going to use your idea of the wire routing . What size bit and what size grommet did you use? TIA

@irishrider7324 4 года назад

I love CD as well! But not everything is plug and play. I installed all CD turn signals and just installed dual brake/turn lights, with modulator. Not working correctly so I’m going to call CD and see if they can help fix .

@Randystites66207 4 года назад

Now do they work as brake and turning lights? I have a HD 2007 Street Glide.

@Randystites66207 4 года назад

I am going to do the same and drill a hole to run the wire and not run it over the top. I can see the wire getting pinched in two after time.

@d.mar.2624 Год назад

In the area where you drilled a hole instead of using the foam to rest the wire over, What size hole did you drill? Thanks!

@johnkisch2654 9 месяцев назад

Did you use the lighting module for the blades or for the bag handle light?

@michaelserrell3796 4 года назад

Does anyone make a yellow light kit to go on the sides of the front fender?

@gilbertmal6033 4 года назад

Bad ass. It will help y'all be more safer out there.

@515mustang8 2 года назад

What’s the difference between cd lighting and the ciro3d’s thanks

@jimmyflowers6597 4 года назад

I love custom Dynamics to if I got all my lights free

@TheOrneryOne 4 года назад

Hell yeah!! We have had two other brands on our bike and you can see who we decided to go with. You have followed us this past year right? You would know the other two brands. 😁😁 one looks like Christmas lights & the other is well... just bad. Lol

@jimmyflowers6597 4 года назад

@@TheOrneryOne right on be safe keep the shiny side up

@ericjones5753 Год назад

Where did you get the extra grommets? They don’t come in the package

@paulrevere4326 Год назад

What is the wiring process (diagram for a 2007 model Street Glide)????

@NOSCOPE-zb3hl 2 года назад

The most important part the how to wire to bike,,,

@robertmorenoii4399 3 года назад

Every video I watch with every light installed with custom dynamics where it says plug-and-play nobody ever shows the plug part that’s the most difficult part if you ask me. Why doesn’t anybody ever show the wiring part

@9mmjames653 4 года назад

cool

@BdeSimon 3 года назад

Bro nice beard!

@joewurtenberg2128 4 года назад

Just wondering what size bit and grommet he used to go in behind the latch. Been hesitant because of the wire over the side deal but that was genius! Cheers.

@barrydawg7544 2 года назад

Ornery One, Just did the BBB in Arkansas recently. I had these saddlebag lights installed on my 17 RGS. Great add-on. I thought they were going to be run/turn only,, I was pleasantly surprised that they are run/turn/and Brake. Super bright. My question is I want to take off my bags and detail them but am not sure how to disconnect them. I don't want to screw it up. How do you unclip the plug? I should have had the installer show me how easy it is. Dawg from Columbia, Mo..

@TheOrneryOne 2 года назад

Yes for me, I have a clip that I unplug that is between the saddlebags & the frame of the bike. I would definitely check to see where your clip connector is located. We did it this way so that I can take the saddelbags off very easy with just unclipping the connectors.

@connorhicks13 4 года назад

Getting the VIP treatment over at Denny's HD eh?

@justindemar4584 2 года назад

Just bought a street glide that already has the latch lights installed can I also install other rear lights without having to add connectors or more plugs ? Thanks

@dkingpin74 2 года назад

CD sells a harness that turns the single connector into a triple. CD-BCM-PLUG-EXT

@Jabcross1234 3 года назад

Was the wire long enough for under the seat or did you get the extension

@alphainvest06 3 года назад

I just bought these and the wires were plenty long., inside the saddlebags and under the seat.

@scottbilsky792 4 года назад

Just picked up a set of latch lights and rear saddlebag lights. How did you connect them both to the harness? Do they have to be spliced to work with the existing rear brake/signals?

@justindemar4584 2 года назад

I’m wondering same thing

@dkingpin74 2 года назад

CD Makes a harness to attach up to 3 sets of lights. Part number CD-BCM-PLUG-EXT

@p2o8wer 4 года назад

Probably not the right place but I need some help. How can I make my pipes louder without losing back pressure? I have the cane and Hines super radius. I took the baffles out but it had almost no back pressure at idle.

@marcmo7138 4 года назад

how do you know you have no back pressure at idle? Go study back pressure. youll be fine.

@benjones4658 4 года назад

Tj and miss Stephanie hello hey quick question if you would please. I saw you have bag blades on your saddle bags. Can you see the wires for the bag blades with the saddle bags installed? Thanks RSMF😁

@TheOrneryOne 4 года назад

No, they are ran inside the saddlebags as well. You can’t see any of the wires. 😁⚡️😁

@benjones4658 4 года назад

Thank you 🙏 much hope you two have safe and happy riding season.

@Davidjones-sk4vf 3 года назад

What size, and where did you source the grommets?

@joewurtenberg2128 2 года назад

Please answer this question. Would also like to know what grommet was used on the bag side.

@milesholt762 Год назад

I have a broken wire on my CD latch light. How do I repair?

@milesholt762 Год назад

Figured out what the problem was. Three broken wires at the base of the light. I suggest not running wires over top of the bag as recommended by CD.

@donniestephens5391 4 года назад

Awesome stay ornery bearded charmer

@andrewsumner5388 4 года назад

Didn’t you already have a set installed before?

@TheOrneryOne 4 года назад

Yes! We had a different brand. In our opinion.... are not as high quality!!

@DeBa1226 4 года назад

Where is Denny’s? Thought u were in Biloxi on ur way to Daytona

@TheOrneryOne 4 года назад

De Ba yes!! This was right before we left.

@DeBa1226 4 года назад

@@TheOrneryOne see brother, I’m watching, tracking... I got skeeerd for a minute and thought you took a wrong turn, and ended up back near home! I was like, “ Damnmit... that GPS sucks; they should have stuck with the old school Rand McNally Atlas road map and a sharpie... it’s never gotten me a wrong turn yet!!!” Lol.