A brief summary of the tutorial;
I am pouring the resin to the molds and mixing my resin tints/pigments (you can use any tint, pigment, paste, the key is adding a very little white into the colors) with %99 isopropyl alcohol (you can use %91-99 range) in seperate cups/ice cube tray. Dropping the colors and give them a swirl with a toothpick/needle. Wait for 1 hour (in the tutorial video it is written in the wrong part 😂)(waiting time that depends on the resin brand, so you may need to make some experiment on timing - I am using different brands and this one is a brand for electronics) and give a swirl to them once more (this part is for making the petri effect feathery). Then wait for demolding.
The color mix;
I am eyeballing it but let me say, 1 part resin + 3-4 drops of tint/paste + 1/2 part Alcohol. You need to test it in a sample piece before you add the colors to all the batch. Once you drop your mix, it needs to spread a bit, if it doesn't then you need to add more alcohol to the color mix.
Hope you enjoy :)
You can find some of my pieces on my Etsy Shop
www.etsy.com/s...
If you would like to follow me;
my instagram is @LunaByLuna
/ lunabyluna
my facebook is Luna Design
/ lunadesign.tr
Music: www.bensound.com
8 окт 2018
