FEEDBACK DESTROYER BEHRINGER FBQ1000 | HOW TO INSTALLATION / CONNECTION "BALANCE" & TEST [16] 

Contain :
[16]
FEEDBACK DESTROYER BEHRINGER FBQ1000 | HOW TO INSTALLATION / CONNECTION "BALANCE" & TEST [16]
In this video section, it talks about How to do BEHRINGER FBQ1000 & TEST FEEDBACK connections.
connections in this section use BALANCED CONNECTION, with the following arrangement:
MICROPHONE - MIXER - FBQ1000 - POWER AMPLIFIER - SPEAKER.
With tests to find out how this installation was successful or not.
[15]
FEEDBACK DESTROYER BEHRINGER FBQ1000 | (1) HOW TO INSTALLATION / CONNECTION UNBALANCE & TEST [15]
In this video section, it discuss about How to do BEHRINGER FBQ1000 & TEST FEEDBACK connections.
the connections in this section use UNBALANCED CONNECTION, with the arrangement:
MICROPHONE - MIXER - FBQ1000 - POWER AMPLIFIER - SPEAKER.
complete with tests to find out how the installation was successful or not.
[14]
HOW TO KNOW "FEEDBACK FREQUENCY" WITH BEHRINGER FBQ1000 - FEEDBACK DESTROYER [14]
In this video section discusses how to find out the value of the frequency that appears feedback, by viewing the FEEDBACK DESTROYER BEHRINGER FBQ1000 diplay.
The trick is to select FILTER on the PRESET then SELECT FREQ then the frequency number that appears on the display will appear.
Please watch the video to find out in full.
[13]
FEEDBACK TEST, PRESET-3 & INSTALATION "MICROPHONE - MIXER - FBQ1000 - POWER - SPEAKER"
In this video discuss testing using a microphone without a switch to look for feedback that appears / generated by the speaker control stage.
Testing with speaker control stage because the location of the anatar mic and speaker can be close together and SUSCEPTIBLE WITH FEEDBACK, and immediately eliminated by the BEHRINGER DESTROYER DESTROYER FBQ1000.
prove it by watching the video above.
[12]
PEQ's GRAPH, Freq 40Hz ~ 6.3KHz, PRESET-5, FILTER 1~12 | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [12]
In this video provides an overview for FULL PARAMETRIC EQ's.
PRESET 5, COUPLE CHANNEL L & R, PARAMETRIC STEREO, SET 2/3 OCTAVE, RANGE 40 Hz ~ 6.3 KHz.
The results of the graphs will give Feedback Detroyer Behringer FBQ-1000 performance to a STEREO PARAMETRIC with a range of freq. settings as mentioned above.
[11]
PEQ's GRAPH, FILTERS 1~12, RANGE 125Hz~1.6kHz, PRESET 4 | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [11]
In this video provides an overview for PRESET 4, COUPLE, STEREO PARAMETRIC, SET 1/3 OCTAVE, RANGE 125Hz ~ 1.6KHz.
The results of the graphs will give Feedback Detroyer Behringer FBQ-1000 performance to a STEREO PARAMETRIC with a range of freq. settings as mentioned above.
[10]
PRESET 9 & 10, IDEAL FOR CHOIR | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [10]
[09]
PRESET 8, COUPLE CH-L&R, 4 PA + 8 SI, FOH SPEAKER | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [09]
[08]
PRESET 7, CH L&R @MONO, FILTER 1 ~ 8 MODE SI + FILTER 9 ~ 12 MODE PA.Def | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [08]
[07]
PRESET 6 CH-L MIC LEAD VOCAL & CH-R MIC BACKING VOCAL | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [07]
[06]
FEATURE PRESET 5, PEQ, COUPLE L&R, 2/3 Oct, FILTER SET | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [06]
[05]
PRESET-4 FEATURE, PEQ (PA), COUPLE L&R, SAMPLE FILTER | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [05]
[04]
FEATURES MODE FILTER L & R (1~12) AU, SI, PA, OF, LO | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [04]
This video discusses the features of the FILTER MODE for setting the settings by selecting the following:
1. filter mode AU = AUTOMATIC (FULL)
2. SI mode filter = SINGLE SHOT
3. filter mode PA = PARAMETRIC EQUALIZER
4. filter mode OF = OFF / NOT FUNCTION
5. filter mode LO = LOCK
LO (LOCK) filter mode will appear after locking the frequency feedback on the filter.
[03]
FITURE AUTO, SINGLE SHOT, FULL AUTO "PRESET 1 - 2 - 3" | FEEDBACK DESTROYER BEHRINGER FBQ-1000 [02]
[02]
REAR PANELS - TERMINAL FUNCTION & INTERFACE CONNECTION | FEEDBACK DESTROYER FBQ-1000 [02]
[01]
FUNCTION OF FRONT PANEL PARAMETERS KEY | FEEDBACK DESTROYER FBQ-1000.
Discuss the parameter buttons and indicator LEDs on the ENGINE PROCESSOR FBQ-1000, including buttons and functions:
1. LED METER
2. INDICATOR STATUS
3. LED DISPLAY
4. INDICATOR DISPLAY
5. JOG WHEEL
6. FOLTER SELECT
7. FILTER MODE
8. ENGINE - L KEY (COUPLE)
9. ENGINE - R KEY (COUPLE)
10. FREQUENCY
11. FINE
12. BANDWIDTH
13. GAIN
14. IN / OUT (MIDI)
15. STORE (MIDI)
#ANTHONMITRAAK #SOUNDSYSTEM #POWERAMPLIFIER #AUDIO

Наука