FENDER TELECASTER (TELE) - How to Setup your Guitar, Step-by-Step

Подписаться 23 тыс.

Просмотров 150 тыс.

50% 1

MusicNomad and Geoff Luttrell team up like no other FENDER Telecaster (Tele) setup video, with easy to follow how-to setup instructions using MusicNomad's Precision Gauges and Tools and the KEEP IT SIMPLE, SETUP (KISS)™ method. To learn more about the setup tool sets used in this video and how to setup your own guitar or bass visit MusicNomad's Setup Hub: www.musicnomadcare.com/How-To...
Since 2001, Geoff Luttrell Master Guitar Tech of SF Guitarworks and Sonoma County Guitarworks sfguitarworks.com/ has setup thousands of guitars and also teaches countless guitar and bass players how to setup their own instrument in his setup workshops. He does an incredible job, like no other, of breaking down each setup task explaining in layman’s terms why your guitar will play and sound better by performing each setup task and then leads you through each step, giving helpful tips and tricks along the way. Using MusicNomad’s Precision Gauges and Tools, the setup process becomes so simple to perform as you will see for yourself. Follow along with your own guitar and you will be amazed that yes you can setup your own guitar. Not only is it fun, but a properly setup guitar takes your playing and sound to a whole new level.
Check out MusicNomad's setup hub for lots of how to videos, setup tools and info on the KEEP IT SIMPLE, SETUP (KISS)™. Subscribe to our Channel for more videos coming.
0:00 Introduction
1:00 Pre-Setup Steps
4:23 Truss Rod
13:56 Action of Strings
20:23 Radius of Strings
26:23 Nut Height
38:01 Intonation
44:17 Pickup Height

Хобби

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 191

@CuriousCaine 2 года назад

In a word, WOW! I've been involved in high tech company education and marketing for my entire career. The clarity and quality of this video is absolutely at the tippy top. Extremely articulate presenter makes the previously mystical become easy. Tools on order and I can't wait to apply this education to my Tele!

@EnigmaticAnamoly Год назад

Minus the g*ddamn persistent lip smacking.... I love the info he shares but as someone who is misophonic, his lip smacking drives me absolutely bonkers

@guitarman4242 10 дней назад

I've follow Geoff's set up instruction for my Martin and Taylor. Both turned out perfect following his tutorials. Couldn't be happier.Tele is a different animal. Take away was the difference of nut filing angle for the tele ( nearly parallel) as opposed to a slight angle toward the head stock on the acoustics. Very well done. Can't wait to try this on my CS Tele. Thank you Geoff. I'm in Marin. Good plug for Nomad also.

@dustinadair7893 2 года назад

15 years of playing electrics and I rarely tinker with them myself or set them up. Always pay someone else to do it. This gave me the confidence to go ahead and buy this kit and try it myself. Thanks!

@thadstuart8544 Год назад

i have all of your gauges and most of your your nut files. i am so pleased with the ease of use. regarding the radius gauge, i have found that if i shine a flashlight from behind the gauge, it will clearly show which strings are touching the gauge and which ones are allowing the light to shine through because there isn't any contact. just a tip in case you haven't tried it. thanks again

@Gnasherism 3 года назад

Brilliant video guys, currently building my first ‘partscaster’ and this is gonna be my bible! Great stuff cheers

@andyritchie2408 3 года назад

Absolutely fantastic stuff guys! Thanks!

@MusicNomadCare 3 года назад

You can fast forward to the specific task below: 1:00 Pre-Setup Steps 4:23 Truss Rod 13:56 Action of Strings 20:23 Radius of Strings 26:20 Nut Height 37:59 Intonation 44:16 Pickup Height

@geo5772 2 года назад

Ha! Geoff, imagine my surprise when I found “my” luthier teaching me online! My Strat came out as beautiful as can be. Can’t believe what a Plek can do and cant wait for the P-Bass to be done as well. A Telecaster to follow shortly. Sonoma County and SF Guitarworks are the best in the North Bay. Thanks for the education boys, great collaboration…more to come possibly? Hope so! Best to Seth, Heather and the crew!

@DARKSXDYTGaming 3 года назад

thank you so much i know how to set acoustic and les Pauls up but when it came to my telecaster i had no idear how to thank you so much works very well

@livergen 2 года назад

This has been an outstanding video on set up, I was actually looking for a telecaster set up video And this honestly touched on every issue in the setup process for most all guitars. You sir should be complemented On such an outstanding job and good explanation of the process. And yes, having the proper tools will definitely make your job much easier and more straightforward in the process, I wish my workbench looked like yours but it's close, And also definitely makes life so much more enjoyable. Thank you guys and stay safe.

@TommySprocket 2 года назад

Well, after thoroughly fine sanding my neck pocket to get a good string alignment on my partscaster build I put the Nomad tools to use on my truss rod, nut slots and string radius then I set the intonation when I got to the b string and was tuning it to pitch it broke :( I will have to wait until tomorrow to finish my setup but I would like to thank you for the concise video presentation I could not have done it without you.. :)

@wcarneirofilho 3 года назад

Very good. Great job! Thank you! Very educative!

@ZachKTS 2 года назад

Thank you. This video is the holy grail for setting up a guitar. I was doing it wrong for years. I will buy your products when I need new tools.

@mikehihz Год назад

Geoff has not only been taking care of my guitars since 2009, but I also took his setup course in person and it has been working for me for a very long time. He only sees me when I have a Plek or more serious job to do. Listen to the man and get the tools. You can do this!

@Zen-Mit-Chips 2 года назад

An excellent and comprehensive guide, very well delivered and explained.

@BartoszXIV Год назад

Brilliant video! Everything clear and very well shown. Thank you!

@67er_matze97 2 года назад

stellar demo of how to set up these wonderful instruments !! 👍

@Fatherflot64 9 месяцев назад

The nut cut has got to be the single most underestimated factor in guitar playability and sound.

@michaelruiz3167 2 года назад

Thanks for the sound explanation. I really like your line of tools which I will look into and am already using your care products.

@sthengr 2 года назад

Excellent video series, thanks!

@Togglefree Год назад

OMG, this is a great video!! Well explained!! Thank you!!

@ArtMacasinag Год назад

superb explanation for properly doing a setup. Thank you so much !!!!

@charlesflint9048 Год назад

I recently bought a used Tele Baja, and wanting to get the best out of it, I found this the most informative tutorial ever on setting up my guitar. It is already my favourite and I want to get the best from it. Thank You!.

@MusicNomadCare Год назад

Awesome, thank you!

@GWShark1 2 года назад

Great video, thanks a lot for sharing!

@Ilikepicking Год назад

What a wealth of knowledge thank you very much.

@jmberrysonoma Год назад

Great helpful tips. Decided to start to intonate my guitars myself. Clear and concise info. Thanks team!

@MusicNomadCare Год назад

Rock on!

@KingDM83 2 года назад

Best guitar set up video I have ever seen. I will def be ordering your products from now on. Thank you. 😊

@MusicNomadCare 2 года назад

Awesome, thank you!

@SuperRicky57 Год назад

Geoff and his crew are the best!

@mjtejero 8 месяцев назад

very detailed :) and so helpful. thank you very much!

@paulweddle9250 5 месяцев назад

I did exactly as you showed, and my Telacaster plays perfect! My string height was all over the place before. Thanks!

@michaelthornton2235 2 года назад

Very clear and very thorough. Thanks a lot!

@MusicNomadCare 2 года назад

Glad it was helpful!

@HeySlick96 2 года назад

This is such a good video, yasss

@JMM440xi Год назад

Want that guitar now. Like the combination of colors on the body and the neck is very nice.

@alwatts9713 Месяц назад

Excellent stuff. Thanks for the video.

@juanespinosa8064 7 месяцев назад

I,d like to thank you for your instructional video on how to set up a tele.I,ve learned so much from watching this.Jeff ,you made it so understandable and easy to follow.I own an Amercan tele,which play at home and gigs at medium size venues.I noticed that my guitar started sounding flat and losing it,s strength.I will follow these instructions as you show here, but i first need to buy a repair kit.Thanks again.

@scottmeli 2 года назад

Fantastic video on intonation for a three-saddle Fender Telecaster bridge. Tele’s can be a nightmare to set up…but your video makes that task a lot easier. My Tele is in tune…thank you!

@MusicNomadCare 2 года назад

Glad it was helpful!

@scottmeli 2 года назад

@@MusicNomadCare Very helpful! Thanks again.

@paul1060 8 месяцев назад

good video… clear.. concise… methodical . i follewed along and adjusted my # 1 Tele

@paulbush8881 9 месяцев назад

This without a doubt the best tutorial I´ve ever seen ...

@guitarsgoats Год назад

I do my own guitar work and maintenance and still bring my guitars to Geoff. :) I was fortunate enough to live blocks away from his San Francisco location and coincidently, we both moved to Sonoma County, so he's still a short drive away. Looks like I need more Music Nomad tools. Nut files!

@nickster5286 5 месяцев назад

What an amazingly thorough and informative video. Thank you for putting out such a great product!

@MyFudgeyou Год назад

I like how he nails the neck relief perfect and then instantly drops his elbow in the middle of the neck 14:09 :)

@stockholm1752 Год назад

Ha ha, yeah, that’s weird. I don’t see what all the praise is for. I found this video tedious and too much about selling their products. There’s tons of good setup videos out there, especially for Telecasters.

@patrickruesken4207 2 месяца назад

Fantastic video! Really enjoyed the watch and learned a ton!

@robertwilliams1770 7 месяцев назад

Thank you sir for time and Knowledge Very informative

@luissaints7082 Год назад

Excelente Very thanks!

@pariahgaming365 2 года назад

I don't think I can ever thank you guys enough for this video! My Tele now feels, plays and sounds like it's ready to make a platinum record!

@codydandy1166 4 месяца назад

Thank you. This helped me take care of my American tele. Though it should be noted that when you install new strings, stability will be wonky until they break in some. Therefore, intonation within the first 48 hours of new strings is hard to pinpoint. At least that was my experience. After that, she plays like a dream.

@patvidal8932 7 месяцев назад

Congratulations ! Simple the BEST video. greetings from CHILE

@jtwidz 2 года назад

Just setup a used G&L ASAT that was really out of whack and wanted to say thanks. It plays beautifully now.

@MusicNomadCare 2 года назад

That is great to hear! thanks for all your support

@Bag-Of-Toys 2 года назад

my new Fender Mod-Shop was full of problems (no relief in neck, wonky bridge and pickup heights). This completely solved them all. 🤘🏻

@MusicNomadCare 2 года назад

It’s feedback like this that inspires us every day to be the leader and raise the bar in equipment care.

@jonjenkins5253 Год назад

To be honest, this is the most professional guitar setup I’ve seen online. At last, someone who actually knows what they’re doing.👍😎

@joeycovington4681 Год назад

Thanks!

@billysmether6237 Год назад

Great video! Thanks!!!

@MusicNomadCare Год назад

Glad you liked it!

@rickcurtis2983 6 месяцев назад

Excellent instructional video...will subb today!

@user-ru6qg5qr7g 4 месяца назад

Good job 👍

@tomrudd1118 10 месяцев назад

Thanks.

@johnrenshaw9688 2 года назад

Hi from Spain. This is simply the best presentation of how to set up a Telecaster. I have a Fender Jaguar that I rarely played until I followed your step by step procedure. I already have some of the tools required and had to improvise a but would benefit from a complete set from your company, but the cost in Spain is very high due to postage costs, import duty, customs administration costs and 21% IVA tax. One question I have is would you set up a 335 hollow body electric guitar to a similar specification?

@MusicNomadCare 2 года назад

Glad you found it helpful. We have a distributor in Spain Maga Music, you can find info on our website and you can email them for getting our products. We have a set up video we did for a Gibson Les Paul, check out that to help with your 335 hollow body setup.

@chrispendergrass5829 2 года назад

Hi ,great video. I'm learning how to do all my own setup work on my Tele. Question,, When setting the High and Low "E" strings action height do you capo the 1st fret????

@MusicNomadCare 2 года назад

You can pick capo or use your finger. You need to make sure you have your fixed point at the first fret.

@jav6187 Год назад

than you!!

@chrisdiceart 11 месяцев назад

Really well done! 🙂

@MusicNomadCare 11 месяцев назад

Thanks, how did your setup go?

@chrisdiceart 11 месяцев назад

@@MusicNomadCare It went well! Just a truss rod adjustment. It had a lot of releaf, 1/4 Turn and it's night and day better! Right at .006 😃

@Fatherflot64 9 месяцев назад

For a three-on-a-side headstock (like a Gretsch), don't you have to angle the D and G slot outward on the exit from the nut towards the tuners? Is that a lot harder to do than with a straight pull headstock?

@jimmck123 Год назад

Really great setup video !!! Question: Can you use those Music Nomad nut files on a brass nut ?

@MusicNomadCare Год назад

Our files will cut metal saddles, but it is only recommended to do light cleanup (polishing, deburring) due to the fact that metal will reduce the life of your files. You can do it but just be aware of the possible consequences to file life.

@daveszutenbach6096 Год назад

I have a 91 Mexican Tele. Played it literally thousands of hours on stages and at home. I change the strings and adjust the saddles occasionally. Other than that...I've never needed to touch anything else. The Tele is the F-150 of of geetars. Change the oil and keep her clean.

@dynamn Год назад

Very helpful information. But what Bridge Radius should I set for my tele with compound 10-14 fretboard please?

@MusicNomadCare Год назад

With your strings off, you will still measure the fretboard radius at the last fret. You will then match your string radius to the fretboard radius. it should be 14 but you will want to double check yourself.

@davidmaher1313 2 года назад

If starting with a brand-new Tele 3-saddle bridge, is it good practice to set the saddles to the middle of their run on the intonation screws, to allow plenty of forward and backward adjustability during setup? Also, along the same lines, is there a good starting position as to saddle height, prior to setting for correct high and low e-string height, and neck radius, as part of setting up of a Tele the 1st time? I can't seem to find anywhere, those basic very general starting points for a brand-new, never installed Tele bridge.

@MusicNomadCare 2 года назад

There is no starting point, it comes out of the factory already setup. You will want to use the KISS method along with the gauges and tools to check the setup out of the factory and then you can dial it in more from there if you need too.

@EnigmaticAnamoly Год назад

Why do you do over the strings with your radius gauge rather than underneath?

@shanegolden3948 9 месяцев назад

4/64” Straight across all strings at the 12th Fret. After adjusting string height, always tune back up to pitch, as this can affect the height adjustment. Rinse and repeat 😁.

@sd3gunner 2 года назад

what do I need to do if I have string buzz on an open string when I get to point of adjusting nut? also how do I know what my fender tele nut was cut for i.e. 9s 10s 11s? if it was cut for 10s can I use 8s?

@MusicNomadCare 2 года назад

Yes if it was cut for 10's you can still use 8's. The general rule is that the file should be the same size as the string, up to no more than .003" - .004" larger than the string. If you have open string that is buzzing, you most likely have a nut slot that its too low.

@FrankEatonMusic Год назад

Do you have a video for setting up a Tele Custom with humbucker for neck pickup? or is it as simple as looking for a video on adjusting a humbucker to supplement these instructions? I assume the six-saddle bridge on mine would be easier to intonate? Thanks for the video! This is very helpful!

@MusicNomadCare Год назад

You can follow this video but when you get to the pickup height you can follow our starting recommended pickup heights for humbuckers and dial it in from there. here is a link to the instructional booklet and on page 21 we give pickup recommendations www.musicnomadcare.com/How-To-Advice/Setup-Hub/Setup-Manual/

@kezstone1 Год назад

Great info thank you. I have a three saddle version and have found when they are angled to the neck radius (two outer ones angled), the string spacing at the bridge is uneven. Is this normal?

@MusicNomadCare Год назад

The string spacing should be constant at the bridge, if you need additional help please email our guitar tech at tech@musicnomad.com

@allstopblue5717 Год назад

Definitely not normal. Unless you have them severely angled for some reason. I Usually set the string height for low e and high e and don’t touch them anymore. Then set the remaining strings to the radius without touching those 2 outer string heights anymore

@marcohermans3207 2 года назад

The neck relief you suggested of 006/0,15m When youm instead of Fender Specs 010/0,25mm feels so much better !!! I never tought that a minor adjustment makes so much difference. My Tele plays like butter now...One question ; when you set up your action, do you press the string at the first fret? Because when setting up a P-Bass you fret the first fret..... Thanks guys !!

@MusicNomadCare 2 года назад

You can use our pick capo to hold the string down on the 1st fret or you can use your finger and press down right behind the 1st fret to have the string fretted on the 1st fret.

@allstopblue5717 Год назад

I’ll have to try because yeah I’ve never seen any kind of recommendation below .010 for neck relief. That seems incredibly straight

@leemp337 2 года назад

when measuring action. does the string at the first fret need to be pushed down before measuring? It looked like you were pushing it down but i could really tell.

@MusicNomadCare 2 года назад

Yes, the string needs to be held down at the first fret when taking your measurements.

@josephliptak 6 месяцев назад

Anyone know what model this Fender Telecaster is? Is it a custom shop?

@limitededition1053 2 года назад

If the low E and High E are both 0.06" could you just set every string height to that for the radius?

@MusicNomadCare 2 года назад

The KISS method is a linear process of steps to achieve the best setup without having to go back to previous steps. You would set your E strings to the measurement desired using the guide on the gauge. You have picked Low-Med action for an electric. It is .06 on the low E and .05 on the hi E. After those are set, you will do your string radius. That will set you inner 4 strings to the proper height and radius. It is important to follow the steps in order with the KISS method.

@knox20b 2 года назад

Hey I set up my telecaster with your help, but the intonation is not good as my Gibson les Paul per example. I think I must admit little intonation compromises to have a right action on 3 saddle bridge. Am I right ?

@MusicNomadCare 2 года назад

Yes you're correct, you may need to sightly compromise.

@Krispy1011 2 года назад

when you set string height - do you have to fret the 1st fret? or do you set string height with string open? it looks like you fretted the 1st fret but you did not mention it

@MusicNomadCare 2 года назад

You do need to fret at the 1st fret. In the KISS flow, string height comes before nut height. The measurements we have are based on using the pick capo at the first fret. Since the nut has not been addressed yet you would be using a height reference point that could be off. The first fret is a fixed height to adjust from.

@JeffreyKahnartist Год назад

Thank you so much. I’ve been watching a lot of videos on this very topic and yours is the most clear and helpful.

@mattsiddons733 10 месяцев назад

Am I seeing things or @8:10 when measuring neck relief,you say fret at the 12th, yet it appears you are fretting the 13th fret?

@MusicNomadCare 10 месяцев назад

The string needs to terminate on the 12th fret. You can press the string on top or behind the 12th fret to assure the string is sitting on the 12th fret while measuring your neck relief.

@benink5690 2 года назад

I cannot find a pickup height I'm in love with on my tele. I might buy new pickups now

@lrobe52993 Год назад

is there a rule of thumb on how much to turn the truss rod to achieve relief? It looked liked you made about a 1/4 turn to go from touching the fret to .006. Is that about right?

@MusicNomadCare Год назад

How much you adjust/turn the truss rod depends on how far off the relief is. There is no rule of the thumb on how much to turn the truss rod to achieve the proper relief for your guitar. Using our gauge and KISS setup method allows you to see how much or how little relief you have. Use smaller adjustments, 1/8" - 1/4" turns then measure until your reach the proper relief measurement listed on the gauge for your instrument. Email tech@musicnomad.com for more information.

@rockhoundingeasternwashing5308 7 месяцев назад

Was hoping you'd talk about and work on neck angle. fret leveling and fret crowning and polishing. Great video though. Thanks!

@kevinking2927 7 месяцев назад

What if you set your high and low e action but when you set the radius the low e does not hit the radius gauge

@MusicNomadCare 7 месяцев назад

Email tech@musicnomad.com to assist you on setting the radius for your specific guitar.

@oinkooink 2 года назад

I just went to record a killer song. Picked up my Tele...song starts with open E chord. Outrageously out of tune. Even pinpoint tuning...every string pings the electronic tuner right on the money...strum the chord...outrageously out of tune...ugly. Want to smash guitar onto the floor. I hope this video can save my guitar. EDIT: It worked. The only thing was the low E string was too low at the nut measurement and it was buzzing when plucked open. Wasn't up for filling and recutting a nut slot so had to compromise and raise the E string at the bridge a bit. Eliminated most of the buzzing. Thanks for the video. Very clear and well done.

@virgilmaralit7817 4 месяца назад

8:08- "Fret at the 12th fret" but you're fretting on the 13th? please explain thank you for this video

@MusicNomadCare 4 месяца назад

The string must terminate on the 12th fret. You can push down on the 12th fret or push behind it on the 13th fret so the string terminates on the 12th.

@slobodanilkic8136 2 месяца назад

As I see in the video, bridge cylinders are not mutually parallel. Is that because of intonation? Should they be perpendicular to the strings?

@MusicNomadCare 2 месяца назад

Great question! We'd be happy to discuss this with you if you email us at tech@musicnomad.com and we can dive into that together. Thank you.

@abhasafilms180 Год назад

Right on the 💵

@DarkSXDYT 2 года назад

On a telecaster after it’s all setup should we t still buzz a little bit .

@MusicNomadCare 2 года назад

The KISS setup method is based on doing all the steps in order and having level frets. For example, if you do the String Action Height adjustment only and you have fret buzz, it may be because you did not adjust your Truss Rod. Make sure you follow all the steps in the setup process. You can find the proper steps in our Setup Hub www.musicnomadcare.com/How-To-Advice/Setup-Hub/The-Setup-Flow/ For worn or un-even frets you will have to compensate for that until you are able to get fretwork done. To achieve clean notes and no buzzing without fretwork, you will need to raise the action until you achieve no buzz. More relief in the neck and higher string action can solve this but is harder to play and can lead to intonation issues. Another cause for buzzing can be that your nut slots are too low or were cut too low. If you are having any of these issues, we recommend you take your guitar to a qualified repair shop.

@Larry_left_a_comment Год назад

Stings ring out a bit sharper initially than later. Should I only pay attention to the earlier? James Taylor would tune certain strings a certain number of cents low. He does video of it and shows how may cents low he tunes each string.

@MusicNomadCare Год назад

regarding intonation we give you starting point but they can be dialed in for your specific playing style, email our guitar tech at tech@musicnomad.com your questions so we can help dial in your intonation that works best for you

@DARKSXDYTGaming 2 года назад

Does this work on all telecasters

@MusicNomadCare 2 года назад

Yes this video will be great for all telecaster.

@rodrich1644 3 года назад

Is he fretting the string when he measures action height?

@MusicNomadCare 3 года назад

Yes you push down at the 1st fret with either the pick capo or using your finger

@eilisniaisi5954 Год назад

Hi, I set up a telecaster with these directions and a day later the action is kind of high, much higher than where I set it up, it changed all of a sudden. Where do you think I've gone wrong? I must have followed step one wrong with the truss rod? I haven't touched the nut because i don't have the files yet

@eilisniaisi5954 Год назад

I was busking yesterday in the heat as well that may have had an impact

@MusicNomadCare 11 месяцев назад

Hi Eli - since the setup wasn't finished (adjusting nut height), it's hard to say what went wrong. Since the guitar was in the heat, we recommend letting it acclimate to a standard environment and doing a complete set up. Please send us an email at tech@musicnomad.com if we can help further.

@Sherman1862 Год назад

What size Hex or Allen key dose the truss rod take? And also what size to lower and raise the micro screws at the Bridge? Thank you! : )

@MusicNomadCare Год назад

Check out our trussrodwrench.com to find the truss rod size for your Fender. For the micro screws pick up our MN229 Tech Screwdriver & Wrench set, that will have all the bits you need for the screws on your instrument. www.musicnomadcare.com/Products/Guitar-Tech-Tool-26-pc-Set/

@Sherman1862 Год назад

@@MusicNomadCare

@Sherman1862 Год назад

I just bought the KISS 3 Pack Kit for $149.00 I think, I grew up in Santa Rosa on Beaver St , SRHS '81, SRJC '85, SSU '90", I see your in Sonoma, so I thought I'd send some money, back to "The County".. Lol.. Anyway, I prob have some of these tools scattered about, but it will be nice to have them all organized in three kits.. Thank You!!!! Will be setting up all my Guitars with the help of your Videos.. : )

@applepiede876 2 месяца назад

This is by far the most comprehensive and best structured video covering this topic. I just built a Telecaster clone from a kit and with the help of your instructions I was able to make it sound real nice. Thanks so much for sharing your in-depth expertise.

@MusicNomadCare 2 месяца назад

You're very welcome! I'm happy to hear our video helped you build your clone Telecaster. Tag us on Facebook & Instagram if you're sharing on social! Would love to see it

@davidmaher1313 3 года назад

Is it possible that even though you loosen the truss rod, that the neck just won't move into relief? I have a new roasted maple Fender neck that I'm installing on my Tele, and have been trying to do a setup, and the neck is straight as an arrow, even under string tension. I've loosened the truss rod as much as I dare, and it still seems to not budge at all. Can you literally over-loosen a truss rod? I'm a bit baffled as to what I'm missing in the process, and any help would be appreciated. The Fender neck is headstock-adjustable, if that matters. There were no shims in place when I removed the original neck, and the neck pocket itself seems "normal".

@MusicNomadCare 3 года назад

With the truss rod loosen all the way you should be able to pull relief into the neck. Due to the variables of the replacement neck we recommend you email our tech at tech@musicnomad.com and he will get deeper into your situation

@toddwilliamson2651 3 года назад

Roasted maple is stronger and less pliable. If it’s the Fender MiM replacement neck it is very straight from the 4 or 5 I have worked with. Light strings won’t change the relief. It is designed that way. 12” radius jumbo frets roasted maple. Thin oval shape. It’s a shredders neck. Cut the nut low and go for Suhr spec not Fender. I put Ernie ball .010 through .052 on and the neck goes to .004 - .006, more of a Suhr spec. Made 5 parts caster with these necks they are all very similar. Level the frets and these necks will take ridiculously low action.

@selfeffect 7 месяцев назад

My saddles won’t go lower than .80. Any way to fix that?

@MusicNomadCare 7 месяцев назад

Email tech@musicnomad.com to help assist you with setting up your specific guitar.

@chrisford7033 2 года назад

This should have millions of views.

@rzh3443 Год назад

I presume , with a compound radius fingerboard , the radius at the bridge should match the highest radius ; I.e. that at fret 12/15 ?

@MusicNomadCare Год назад

With your strings off, you will measure the fretboard radius at the last fret. You will then match your string radius to the fretboard radius.

@rzh3443 Год назад

@@MusicNomadCare Thank you so much ! I love these videos and bought several of the tools ( better than my small engine tools for this purpose).

@jackblack2321 2 года назад

Can't seem to get rid of minor fret buzz on low e and a,

@MusicNomadCare 2 года назад

Make sure you did the full setup in the proper flow. If you have gone through the entire process and you are still getting buzz there may be a fret issue. For worn or un-even frets you will have to compensate for that until you are able to get fretwork done. To achieve clean notes and no buzzing without fretwork, you will need to raise the action until you achieve no buzz. More relief in the neck and higher string action can solve this but is harder to play and can lead to intonation issues. Another cause for buzzing can be that your nut slots are too low or were cut too low. If you are having any of these issues, we recommend you take your guitar to a qualified repair shop.

@jackblack2321 2 года назад

@@MusicNomadCare really appreciate you time, put 10s on and it has been better, going to do all the steps again this weekend, it is actually pretty fun

@timrod1984 2 года назад

The 1st thing you should do is measure everything & write it down, with the old strings still on. You have to know where you are at, to get where you want to go

@zaneblack1132 Год назад

So what does the Allen key at the nut do??

@MusicNomadCare Год назад

Can you email our tech at tech@musicnomad.com more clarification to your question

@jimoverly5386 Год назад

In the old days, we just picked up the damn guitar, and, played it times change

@cdemarcomusic Год назад

What do I do if my lack of 10's of thousands of set ups doesn't allow my "Educated Guess" to be correct on how much to adjust truss rod after Ive put the neck back on?

@MusicNomadCare Год назад

Once you put your neck back on your guitar, strung up and in tune you will want to use the KISS gauges to make sure you're at spec, you will want to use the Truss Rod Gauge that comes with the .010 feeler gauge so you can make sure your truss rod is properly set, you may also want to go through the entire process to make sure your instrument is properly setup. www.musicnomadcare.com/How-To-Advice/Setup-Hub/