То есть. Вместо того,чтоб взять кусок проволоки,гвоздь,шайбу или просто электродом на малом токе наплавить, вы предлагаете ухайдохать электроды для такой операции? 500 полуляхов из двухсот пятидесяти.
I'm welding all processes for over 30 years now. Honestly this is wasting time and energy. If you want to close a hole or gap, just use another rod in your other hand as a filler as if you are brazing or like welding Tig/ argon. This way you still have the slag for a sound weld. Actually this video method will give you hell when trying to tack that rod to the other.
Ещё в СССР медную проволоку мотали на электрод и варили чугунные блоки двс, кто сделан в СССР, тот поймёт, я по сей день так делаю, это 100 %рабочий метод
Смотрел этот бред и диву даёшся есть наковальня берёш электрод и бьёш им по наковальне всей плоскостью секунды и чистый. А пока всю фигню он делал, я ужэ бы заварил одним электродом.
Во первых не "Пайка" - а "Наплавка". А во вторых - пока ты зачищаешь электроды или подготавливаешь по длинное прутики - я уже успею 20 таких отверстий простыми электродами заплавлю. Так что - извини - но заново велосипед изобрести у тебя не удалось. А если по чесноку - то сейчас это делают намного быстрее полуавтоматом. Включил - наплавил - выключил - делов на 5 секунд.
I have been welding for 40 years I don't tack weld rod to another I start my weld then use the other rod and use it as thoe I was tig welding works great saves time
I've an old shop teacher who would take one look at those welds and instantly fail you. For him, It did not matter what you welded, you still had to do it right.
If you're trying to fill a gap that wide it won't be as strong as it could be if the part was originally fitted properly. There are ways to disguise the improper weld and for most applications it will last forever. But if you have to make a badly fitted joint work this technique is about as good as you will find.
Do not do this if you need a weld to be strong! Any tradesman proud of his craft knows that using sabot rods will FAIL ex-ray every time. Inclusions, porosity, cold lap, lack of fusion what a nightmare!!
Выпендреж 1 это не удобно, потому как дуга прыгает от 1 ко 2му электроду. И согласен с большинством заварить можно и без ничего, на худой конец просто проволоку взять в руку и не мешает и процесс контролируется, знаешь сколько подать э.
Человек вам показывает, ни как проще, а как качественно это сделать. Таким способом, валы наплавлять ништяк, после проточки, раковин не будет. Для начала, попробуй заплавить отверстие, чтоб после проточки, раковин не было, а потом говори, что проще
It would be better to either use TIG or a proper sized stick. This is going to be an unsafe garbage weld with lots of porosity. Would never pass x-ray or bend testing
I've never worked in any kind of workshop or in doors for that matter. I find these kinds of programs interesting and informative. Thank you for sharing.
These vids by these no name welding channels should be considered a tutorial on HOW NOT TO WELD! They basically teach technics that any weld instructor will slap you upside the head for trying
Please heed the advice of the other reply to your comment. These videos are not a good example of proper or effective weld techniques. If someone ever has to grind that much after they finish welding, I guarantee you their weld is a trash heap. A weld doesn’t have to be pretty but it needs to be prettier than poo and hold up if tested and I am certain the welds in this video would not pass. I do think it’s cool that you have an interest in these things though so don’t give up on looking for useful videos that can give you better examples and then when you’re ready grab your torch and get to welding. 😊
I have welded for 25+ years & have also used 6011 rod & nickel rod to accomplish the same results. Rarely have I chipped off the flux on any rod. I have never had to use fill rod for arc welding. I dont mean to be negative, but as long as you are having fun. Your video did grab my attention. Thumbs up
@@speedbuggy7240 There's not enough flux to properly shield both electrodes and it eats up a lot of the heat you need to get penetration into the base material. This is why buildings collapse in 3rd world countries.
That is just wrong. The welds are FLAWED! The time you need to prep for that "technic" takes too long. Also, the flux is not there for nothing. It's protection for the weld to ensure a propper FUSION of the base metal with the added metal (the weld). Your welds are full of holes (pores), which are DEFECTS!
В чем смысл использования обычного и голого электродов? А если просто двумя электродами варить - наплавлять? Для ускорения наплавки без всякого геморроя, обычно просто сварочную проволоку как при газовой сварке добавляют! В некоторых случаях (для наплавки и приварки броневых листов) использовали большие токи и связывали в пачку по 3-6 электродов.
@@user-qw5os4ed7f причём тут шайба? Куда ставить, что ставить? У меня бля спросони фантазия не работает. Потому что считает вариат с шайбой очень тупой. Ну в том варианте в котором я в уме представил. Ты же не обьяснил
By the time you have chipped off the flux,sanded the rods down and tacked them together. I've burned 10 rods without any defects! Everyone is a welder till a real welder turns up!
I’m not a very good arc welder, but I gas weld quite good and for a time reference I’m over 60 . When I was a young kid my grandfather told me stories about when he worked around boats in the shipyard that this was a common practice . My guess was that was in the 30s 40s maybe even into the 50s when he had his fishing boat .
@@PavloKeba , нет это сварочная проволовка, она обмедненая. Но тут вообще неясно к чему он ПРИСАДКУ к электроду прихватывал. Дуга будет бить то от электрода то от присадки которая будет склонна залипать. Таким макаром обплюешся заливать. В крайнем случае примотал бы проволочками если уж вторая рука, скажем, ананизмом занята.
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
Querido amigo, no tomes el consejo de este vídeo. Estas soldaduras son malas y no aguantarían. Solo usa un segundo relleno en la otra mano. Será más preciso. Asegúrate también de que tu superficie de soldadura esté limpia.
This method can cause flux entrapment in the weld, prevent a proper weld envelope, weld porosity microcracks and weld arc pulling to one side and/or with a high current than required, the electrode is melting/burning and not welding to get a Mechanically sound weld. Better using a big size electrode for a good outcome.
You could also use a bigger rod or do multiple passes. The flux isn't there just to have something to chip off after welding. It's there to help make a sound weld.
Ever heard of Texas tig? You use a stick electrode as the arc, and a filler rod, or another stick rod without flux to put even more material the same way you would as tig welding. Kinda common on badly fit joints with huge gaps
Great way to get porosity into your welds. It' will work to fill a hole, but, don't do it if any kind of quality standard is necessary. You can see porosity in the first example easily.
Скорее такие дилетанты, как я. Знаем, где включается сварочный, как ток регулировать, где держак, а где масса, и всё на этом.😁😁😁 А как варить вот по таким роликам учимся.
I have used a similar but simpler method for years. If you use 6011 rod it works with the coating on. You don't have to weld the rods together just hold one rod in a gloved hand. Make sure you have a glove on. Set up the other rod as you normally would. Use that rod as a torch. Usually a pushing action works best. Hold the other rod like you would for gas or tig welding. it's the filler but also controls the heat. Using this technique you can quickly fill holes or weld the end of a pipe shut. It should be noted that welds bridging such large gaps are considered sub standard in many applications.
Thanks I'll have to try it.👍🏼 I usually use a gas welding wire with my mig welder to fill in gaps. I'll have to try it your way with the arc welding rod.
@@lukewarmwater6412 happened to me too.... was doing a gate repair and didnt have access to heavy enough rods, so Texas tig it was. Had a little thin spot in my glove and got LIT UP.
I remember taking 6010 and 7018 rods (still coated) and essentially using them like TiG filler rods when I was dicking around in welding school. managed to lay some pretty nice looking fat welds but I have no idea if there was proper fusion or not.
There's basically no chance you had proper fusion. It's like welding vertical down with 7018, the weld face looks pretty but it's full of slag and pores underneath.
I would always just use an extra one like I was tig welding. I of coarse beat all of the Flux off from it 1st. Your way looks like it would be easier though. Cool beans dude. ✌
In my opinion this is only an interesting job for laymen in the field of Welding. If you use two 2.5mm rods (one coated and the other not, you will simply have a deposit with the possibility of greater porosity, as with a smaller amount of slag (deposit protective husk) there is a greater possibility of porosity due to the greater inlet. So if you put two 2.5 rods together to do this job, it's much simpler and more practical for you to use just one 4.0mm rod, where your welding machine will work with a lower amperage and you won't have all that immense work in having to keep peeling Electrodes. P.S. I have been working with Welding processes for 25 years
@@markcarolino9908 Even if they don't have bigger rods there is other processes which is far better work practices than what he did. You try to be a little bit professional, not yard shit
В колхозных мастерских, когда не было ничего и электродов тоже, Ремонтники просто обматывали проволоку медной проволокой и трактор работал ещё десятки лет. Не надо забывать своих предков - умельцев.
2:21 любым электродом можно это заварить!!! А от такой сварки о качестве шва, даже и думать нехре!!! давление газов (малюсенький факелочек) выбило отверстие! Не изобретайте велосипедов!!!!!!
Aia nu e Lipire ,este o sudură între doua metale . Lipirea e altceva .!!! La lipire particolele celor doua materiale : 1 cel de bază si 2 cel de adaos NU se amestecă între ele , încît zona lipita sa fie omogena .pe cînd la sudura zona bai de metal topit prin arc voltaic ESTE omogena .Moleculele si respectiv Atomi de metal sint amestecati intre ei . Asa o lucrare se poate face la fel de usor si cu un electrod obisnuit adecvat materialului respectiv .Lasati vrăjelile ca am sudat peste 50 de ani si nu tine !!!
Ножницы ладно, может они слесарные "не нужные", а как он электрод, шкурил на столе? Нужно было, просто обернуть электрод наждаком, и "передернуть", в его случае! 🤣🤣🤣
O revestimento de um eletroldo só em poça de fusão não vai tirar a emprureza contida no ar do eletroldo sem revestimento, ou seja pra tampar furo da certo, mais para uma solda resistente e de boa qualidade onde pode se obter força, jamais faria isso usaria uma bitola de eletroldo maior
