Thank you SO MUCH for this video!! I was having such a hard time threading the bobbin before that I gave up using it for a bit when my first bobbin ran out. This video was an excellent representation of how to thread it, and really the only good one I've found online.
This video made me so happy because my sewing machine kept jamming in the middle of sewing, after I watched this video my sewing machine was good as new because of this video. Thank you for making this video I really appreciate it.
As much as I was discouraged about not actually hearing a voice to guide me, I was able to do this without any trouble! Thank you so much for sharing this :) it helped me knock the dust off of my 4 year old sewing machine (never used) because I didn't know how to thread it properly! I decided to take another shot at it and I was able to do my first set of stitches within minutes of threading it! I'm so giddy right now :)
Yes, thank you! I sat here for 30 minutes trying to figure it out before I decided to look for a video. I watched this and threaded it in about 10 seconds. :)
I place the bobbin properly with 9figure but the bobbin thread is not coming up.I can't see top thread going round and picking up bobbin thread.Please help.
también me paso esto, el problema es que no pasé el hilo por todos los orificios donde debía y este quedaba muy corto. Quizás también podría ser tener la palanquita plateada muy baja
I did just like your video said but the needle is not picking up the bobbin thread. It looks like the thread is already wrapped around where the bobbin sits. How is this possible when you just set the bobbin in there?
Omg!!!!!!!!!!!!! Thank you so much i had started sewing at 10 am and it didnt work and noow its 1 31 pm and i am still fussing with it! Than you so much for this!
Nevermind! I did it, had to rematch the video a few times. The thread being the same color confused me. I couldn't see that you used the top thread to fetch the bottom one and pull it through.
This is because the upper thread is unable to pickup the bottom thread to complete a good sewing. This is probably cause by the timing of the bottom bobbin compartment not synchronize with the needle. You need to open up the unit to adjust the bottom gear of the bobbin compartment if you know how to.
How did you do that?? I've broken 3 needles so far! The needle doesn't catch anything, it bangs against the bobbin holder inside and snaps off! I'm about to throw the whole thing against the wall!
PROBLEM SOLVED HERES HOW: So I just had the exact same problem everyone else is having.. needle goes down but dosent grab bobbin thread... so I scanned through all the comments and I found out a lot of people are having the same problem and making the same mistake... TURN THE WHEEL THAT MOVES THE NEEDLE... A WAY FROM YOU COUNTER CLOCKWISE .. so if u stand or sit in front of your machine .. and the needle is close to you .. picture the wheel at the top as a clock and the hands of the clock are going backwards ... if I could snap a photo an post it here I would easly... I was stuck for a half hour instil I read u have to turn the wheel a way from you.. not towards you...
1. Make sure you are placing your bobbin thread in the 'thread gap' 2. Make sure the upper thread is going through your needle left to right. 3. Be sure to turn the hand wheel towards you (counter clockwise) to lower/raise the needle. 4. If still not working, confirm that the flat side of your needle is inserted facing away from you. Hope this helps.
Laurie Bednar thank you so much! I was so confused but thankfully i read your comment. I'd been turning the wheel the wrong way and had the thread going right to left
Thank you so much for posting this tutorial. I only wish you'd of narrated it...I have no idea what you're doing. You made it look simple or but I've been trying to thread the bottom for thirty minutes now. I suck haha. First time ever using it and I can't even get it threaded.
Hi i have bought this machine 1 year back, it was good. super performance. Can anybody help me to find out the needle number which one to be used. The model number is FHSM-201 i suggest to provide one needle pack with machine so that it will be easy to replace.
might have been clearer had you used two different coloured threads. the one that you see winding around is from the one threaded through the needle YOU NEED to have that threaded. i didn't total novice here. did have to watch like 30 times finally got it
I'm trying to thread my machine and the turny purple handle thing won't turn. So I can't Bob it. I know my sewing grammar isn't correct. Hopefully you understand what I'm trying to say. My machine isn't jammed or something. HOW do I fix it ??... anyone know?
***** thanks i'm gonna try that thanks for posting i just got it, and I was going clockwise as the book, well at least I got thru hemming one leg and 3 quarter lol