Field Strip & Clean the Sig Sauer P365 - FOR BEGINNERS 

🇺🇸 Skull Crush P365 Holsters & Cleaning Gear: skullcrush.com 📺 SUBSCRIBE: youtube.com/@SkullCrushInc?sub_confirmation=1 🤠 Patreon: www.patreon.com/skullcrush

Finally a “how to” video that doesn’t first spend 9 minutes talking! Great vid!

I've been around guns since I was a kid but still decided to watch a cleaning a video now that I have my first gun as an adult. This was EXACTLY what I wanted; no bullshit, clear language, any added opinions were backed up with experience. Thanks a ton, I will definitely check your other vids and stop in get a snake and to purchase other things when the time comes. THANK YOU!

Probably the best tutorial video I have ever watched ... great job & deeply appreciated!!!

Crystal clear presentation and unlike a lot of RU-vidrs, excellent audio. THANKS!

I just bought my P365 3 days ago, it's my first firearm. Thank you for this excellent video, geared to the beginner. Very well done.

Perhaps the BEST instruction-video for gun-maintenance I have seen (on any firearm). I give it a 5-star ThumbsUp. Many thanks !

You’re the only one who explained to actually drop the slide via the lever while guiding it off the frame. Thanks mate

One critical thing to remember if your P365 .380 has a safety is that the slide won't completely reassembly unless you slightly press your safety lever up when putting on the slide.

I gotta say, one of the most professional learning vids I have seen. I give y'all extra props for stating the facts and not veering off into a meaningless rant. Great job and thank you very much, I appreciate y'all.

This has been THE BEST and CLEAREST tutorial I have ever seen. THANK YOU!!!!!

Heck of a thorough cleaning! I thought I was the only one that understood how to vigorously clean. Thanks for a professional presentation. Keep the videos coming, friend.

This is an excellent video. I thought I had made a big mistake buying this weapon due to difficulty with field stripping, especially reassembly. Even people at the gun shop were struggling with this. Several videos were horrible until I found this. The video is clear and the explanation excellent. Thank you.

One of the best I have watched as refresher for cleaning my P365X. Thank you! Had to pause it quite a few times along the way and rewind a bit but very good tutorial.

Once again, I defer to your video for cleaning my SIG. Thank again for your help…from a old Navy Veteran.

Excellent instruction. Very clear and appreciate the pauses and arrows when explaining.

Yep, the perfect tutorial, no unnecessary dialogue.

Best video for cleaning a 365. Thank you!

Excellent video, simple, concise, and good pointers as well. Thanks!

Straight forward and to the point. Thanks for making this understandable and not too long.

Great video ! About to clean my SIG and this by far was simple and a straightforward way to clean - Thanks for sharing!

Absolutely excellent video sir, you made my first cleaning go like a well cleaned Sig. Thank you a million from a French man in South Africa.

I know you geared this for beginners. I have not seen a Sig Sauer P365 cleaning video that suggests removing the (FCU) Fire Control Unit. I always do. It only takes a minute, a small punch & a bit of cleaner of your choice. I always find "Dirt" for lack of better words. I feel this is as important as cleaning anyother part of your pistol. Great video, Thank you- God bless.

Thanks bro, I stripped it along your video for the first time.

Nice video, clean and simple. Thank you. Using the slide release to free the slide during take-down was incredibly tough on mine the first time, took a lot of thumb strength to press.

I get a great sense of satisfaction every time I clean my guns. Its satisfying to see the gun clean and ready to go.

Excellent instructional video. Clear presentation. Good quality. Recommended.

I rarely use the word excellent ... But this is one excellent photo from verbiage - Screen framing - to instructions.

Just got one myself. You make it look like a very enjoyable process. Great video!

Great video. So much easier (for me, at least) than striping my Glock 19. I bought my Sig P365 Micro a few days ago and will clean and lube it before I shoot it for the first time.

Well done Sir. A thorough presentation on proper gun maintenance. I may just go out and buy a bore snake now.

Thank you so much. Best video for newbies like me. I was so scared to do this.

Easy to follow video. Without all the chit chat. Thank you.

Hands down the best cleaning video yet. I just cleaned mine for the 1st time and realized I did nearly everything wrong. I hope my gun is ok 😢

This is the best video I've seen, extremely well done. Thank you.

100% helped me reassemble my 365, had forgot to push slide stop up before returning the take down lever into the necessary position.

Thank you. So clear even I can follow it.

Awesome video! Just bought my first sig and was able to take it down no problem thanks to you

thanks for showing this! Getting my first p365 for my permit and was curious how difficult it was to clean it.

very good job describing the procedure. Thanks

Just purchased my p365 today really helpful video thanks man

Nice video. Getting one of these for my fiancée for a carry gun and this was very informative!

Excellent video!! Very detailed and very easy to understand and follow directions! Thank you!

Nice video. I don't even own a gun and I watched it until the end.

Nice video man, concise but thorough.

I go one step further by cleaning the striker/firing pin assembly and striker channel but yes I clean it the same way. I start with the barrel and chamber using bore solvent (Hoppe's #9) and a copper brush keep doing it until I get fairly clean paper towel patches on a jag or plugs. Then light oil or WD40 in the bore and run a final dry patch or plug down for a dry bore. Scrub the outside and feed ramp with WD40 and old toothbrush then wipe down. WD40 the spring and guide rod, scrub, and wipe down. Slide the same way you do but I use WD40 and wipe down. CLP is a little harsh for my liking. I clean my striker channel out, striker/firing pin and spring assembly. Wipe and swab down and reinstall. I clean the channel with a combination of nylon bore brush, Q-tip, and pipe cleaner. Swab out with a paper towel plug and bore mop or chamber mop. I clean my frame the same way you do and wipe down. Finally I add a little gun grease on the rails, breech underside, slide barrel and guide rod ports, and any wear areas. After reassembly then final wipe down. Pistols are made better than some would give them credit for and using the slide catch to release the slide will not harm the pistol. It is faster and one less motion than having to manually grab and pull the slide back and release. If it harmed the pistol then the pistol would not be able to function as intended by the designers. Thanks for sharing.

The very best cleaning videos

Very nice presentation. Only thing I would add is put a few snap caps in your mag. Insert the mag and rack the slide till the mag is empty to make sure it's feeding and chambering correctly.

Thank you so much! I was nervous as #$%@! Before I cleaned I took it apart and put it back together 3 times. Man was I ever happy and relieved to hear those 2 clicks at the end to know I did it right.

Straight to the point love this

Thank you so much for that information, was able to take apart a very dirty 365 I just bought used from the store.

Thanks for making this vid, very easy to follow and execute.

Use compressed air (sold also in a can) to flush out any fluid or cleaner in any part of the gun. Every part needs to be cleaned, even the striker channel.

Exactly what I do pretty much. I clean the polymer parts on surface separately though. Some gun cleaners, solvents for sure will put some age on the polymer. The CLP's are definitely not all created the same. Gentle warm rag to wipe off the polymer and then light oil or light Ballistol is what I do for the polymer. But then again, BreakFree CLP prob will do it forever on everything but the polymer might look like mine 10 years later, lol.

If the slide doesn’t go back, make sure the safety pin on the bottom back right of the frame is down.

Outstanding presentation.Thank you.

Excellent video. I personally prefer only using the bore snake but that's because I'm lazy. Haven't paid for it yet, but maybe someday.

Too notch instructional 👍🏼👍🏼 One question ; how do I get a 365 in that finish / coloring ? It’s a beauty !

Really good tutorial. Very detailed.

Best video yet

To the point and a good speaker.

Best video I have seen on cleaning a Sig 365- Nice job.

Question about cleaning sequence. Firing the weapon creates powder residue generally and projectile residue in the barrel. These are dry substances so why don’t you first use a dry brush on barrel and other surfaces to get the bulk of the debris off before using solvent. Seems to me you would use less solvent and have less slush to clean up. What do you think?

Thanks for sharing coz its informative for me.

I like the brown one but I have the black one, got it before the brown one came out.

VERY GOOD EASY TO FOLLOW MAYBE NEXT TIME SHOW THE TWO PRODUCTS YOU WERE USING A SPRAY AND I THINK AN OIL....OTHER WISE FOR A FIRST TIME FIELD DISASSEMBLY AND PUT BACK TOGETHER JUST A FEW USER ERRORS BUT NOW I HAVE DONE IT THREE TIME AND FEEL LIKE I GOT IT... THANKS

Simply excellent!

The pick device is called a jag. Good video.

Very well done video!

Very helpful video, thank you!

Great vid. Thanks

Thank you!

Nice job

Really good job. Thank you!

Thank you

The kit you linked does not come with a 9mm brush and mop according to Amazon reviews? -edit- ended up going with their hand gun kit from same company. Thanks for the excellent video!

Very helpful thank you!!

excellent video!

Every now & then I remove the trigger unit. I think Sig has some stake in CLP. They push it like they own a ton of stock in it.

Great video, guy!

Good video Thx

Excellent

Thank you good videoo

Excellent!!

Good job!

Great video!

Super ....explain goooooooood

EXCELLENT video! Thank you!

I recently had a Crimson Trace green laser put on my Sig P365. Would you advise I tape over that when doing such a thorough cleaning? Thanks for the great video.

Great video! Where did you find a desert sand P365? That's f'n cool! Again, great tutorial.

Great review!! Thanks

Good video, thanks for sharing

Professional.

Hey bro. RU-vid is trying to say your video is inappropriate. I had to open it in a new tab just to watch it

I want that color!

Great video easy to follow! Question just got my P365 and the slide doesn’t seem oiled should I break it down clean it and oil the rails?? Sorry I’m a newbie.

Excellent ...Thanks

Great video, any recommendations on a good cleaning kit? I didnt see links for what you used.

About how often do you recommend cleaning? How many rounds through. Great vid!

Thanks 🙏