FIGHTING YOUTUBERS WITH THE RANDOM MOVESET COMMAND (Strongest Battlegrounds) 

9:49 it sounded like fade obliterated all of floaty's bones with that one hit

1:48 “why I oughta” ahh counter 💀

"I'm sure I'll get him now!" ahhh counter

3:29 bro did a whole 360°

1:48 "BEHIND YOU!" ahh counter

1:40 bro countering his inner demon💀

9:50 so clean bro the timing is immaculate

1:16 "3 , 2 , 1 , i'm ga-" I couldn't resist 💀

1:39 "wtf dude" ahh counter

5:05 "MEOW! I'MMA GET IT G-" 💀

1:44 2:33 them ahh counter jokes got me💀

1:46 “I’ve got you in my sights” ahh counter 😂

1 like = 1+ hour in sols rng im trapped from that game

3 most funniest things you heard 3. Holy's "No!" 2. Floaty's "C'MERE" And finally The funniest thing you heard 1. Fade's scream

1:40 “your done!” ahh counter

W we got multiple big collabs so close to each other!

9:50 Bro that slam that mangopool did + it timed the hit.clean af

If you're ever feeling down just remember these motivational words 5:04

"Your really in for it now!” Ahh counter

Anyways here’s a brownie recipe:3 Prep time: 15 mins Bake time: 20 - 25 mins Ingredients: 1 ½ cup Flour 1 tsp Salt 1 tsp baking powder 1 egg 12 tbsp butter (12 tbsp = 1.5 sticks of butter) 1 ¼ cup dark brown sugar 1 tsp vanilla essence 2 tbsp espresso powder ½ cup chocolate chips (optional) ½ cup crushed walnuts (optional) - Preheat oven to 350°F (~176°C). Mix the flour, salt, and baking powder in a small bowl. In a saucepan, heat the butter and sugar together and mix until incorporated. (the mixture isn't going to thicken - its just all going to kind of melt together and be liquidy) Move the butter mixture into a big bowl. (The rest ingredients will be mixed into this mixture.) In another small bowl, crack the egg and mix until yolk and whites are mixed together. In a small glass, add the espresso powder to the vanilla and combine. When the butter mixture is lukewarm to touch, add in the espresso vanilla mixture and the egg and whisk until mixed. Add the flour mix in 2 parts, folding the wet and dry ingredients together so that they're properly mixed together with no lumps. Add in the hand-crushed walnuts and/or chocolate chips. Bake for 20-25 mins. It's done when if poked by a toothpick the toothpick comes out clean.

8:20 Mario ahh laugh

1:40 holygrail was countering his dad😂😂 2:39 same with floaty bro was countering inner demons😂😂😂😂😂

"Hes not gonna expect this play!" ahh counter

“Meow im a kitty cat”😂

Fade be countering others counters 💀

1:18 got me rolling

Fade just being the main target is so funny

“Meow! I’m a kitty cat!” Caught me off guard. 💀

Holdon my dogs yapping to me about how he needs to meow to drink food brb

fade is underrated AF

“I’ve made a severe and continuous lapse in my judgement” ahh counter

"This battle isn't decided!" Ahh counter

9:31 how they ran 💀 i swear this should be a meme

Fade giggles like a little submissive boy

I love the missed counter gag 😂

We definitely need more of these vids

here is how to make an Atomic Reactor -A vacuum chamber, preferably in a spherical shape -A roughing vacuum pump capable of reaching at least 75 microns vacuum -A secondary high vacuum pump, either a turbo pump or oil diffusion pump -A high voltage supply, preferably capable of at least 40kv 10ma - Must be negative polarity -A high voltage divider probe for use with a digital multimeter -A thermocouple or baratron (of appropriate scale) vacuum gauge -A neutron radiation detector, either a proportional He-3 or BF3 tube with counting instrumentation, or a bubble dosimeter -A Geiger counter, preferably a scintillator type, for x-ray detection and safety -Deuterium gas (can be purchased as a gas or extracted from D2O through electrolysis - it is much easier and more effective to use compressed gas) -A large ballast resistor in the range of 50-100k and at least a foot long -A camera and TV display for viewing the inside of the reactor -Lead to shield the camera viewport -General engineering tools, a machine shop if at all possible (although 90% of mine was built with nothing but a dremel and cordless drill, the only thing you really can't build without a shop is scratch building the vacuum chamber) STEP 1 A quality high vacuum chamber is required for the fusor to operate. Sometimes an appropriate chamber can be found on eBay, but generally it is best to make one. Parts can be scrounged for several hundred dollars, or purchased new for $500+. Get two stainless steel hemispheres, purchase two corresponding conflat-flanges (8" flanges in my case), bore out holes for accessory flanges, and then TIG weld it all together. Flanges are typically either of the KF or the conflat style. Conflat can be seen in the image below as the flanges with bolts, and KF (kwik-flange) are seen as those with only clamps holding an o-ring on the mating surface. Only weld on the inside, never on the outside (since virtual leaks can be formed if both inside and outside are welded). If you've never TIG welded before, it would be wise to have someone with experience do it as the welds must be flawless with no pin-sized holes or porous areas to hold a vacuum. After machining, thoroughly clean the chamber and avoid getting fingerprints in it since these will outgas, which means at vacuum pressure molecules in the oil of finger prints or machining oil will become vapor and make it hard to maintain plasma stability or reach a good ultimate vacuum level. STEP 2 Install the oil diffusion pump (or turbo pump if you have a bit of luck scrounging or a higher budget). Fill the pump with quality diffusion pump oil to whatever fill level the pump documentation suggests, attach the inlet to a valve which then connects to the chamber (see diagram), and attach the outlet to a mechanical backing pump capable of reaching at least around 75 microns (any higher and the diffusion pump will not operate properly or the oil will oxidize quickly). Make sure the pump is sufficiently cooled, many oil diffusion pumps require water cooling, smaller ones such as the one pictured can get by with a decent air flow. Once this is assembled, turn on the mechanical pump and wait for the vacuum to reach at least 75 microns. Next you can test the high vacuum pump by turning on the boiler on the diffusion pump. After it warms up (could take a while), the vacuum should rapidly drop below the single micron range. STEP 3 The inner grid (where the high voltage is applied) must now be built and attached to a high voltage feedthrough. It is best to use a metal such as tungsten for the grid wires since it has a very high melting point, and the grid will get extremely hot during high power runs. This can be built however you wish, as long as it resembles a spherical shape of roughly 1-1.5 inches in diameter (for a 6-8" chamber), it should work fine. The grid should be internally attached to an electrical feedthrough such as the one pictured in the second image. This feedthrough needs to be rated for the cathode voltage that will be used, typically 40kv is a good target voltage. STEP 4 Deuterium gas is used as the fuel for this fusion reactor. You will need to purchase a tank of this gas (unless you wish to do electrolysis on heavy water, this process will not be documented here but nothing more than a small Hoffman Apparatus is required - higher purity gas can be gotten from a compressed tank). Attach a high pressure regulator directly to the tank, add an extremely fine-metering needle valve after this (or a laser drilled orifice in the range of 5 microns), then attach this to the chamber. A ball valve can also be installed between the regulator and the needle valve since needle valves are not shutoff valves. See the attached diagram now updated with the deuterium handling system STEP 5 If you can purchase a power supply (occasionally but not commonly found surplus) appropriate for fusion use, the high voltage becomes very simple. Simply take the output of the 40kv negative supply and attach it to the chamber with a physically large high voltage 50-100k ohm ballast resistor in series (large enough that its length will not flash-over if 40kv is applied to it in a plasma run-away or arc discharge). The difficulty is that it is often difficult if not impossible to find an appropriate fully assembled DC supply of this voltage level that is affordable to the amateur scientist. Pictured is my high frequency ferrite transformer pair, with a 4-stage multiplier seen behind it. If a fully assembled power supply (typically manufactured by either Glassman or Spellman), there are a few options: -Find an x-ray transformer, and if necessary either reverse the rectifiers for negative polarity or add rectifiers if it has none (an x-ray transformer core won't have rectifiers, it probably will if it is in its oil tank) -Build a switching high frequency ferrite power supply. This is what I did, however it requires a bit of EE experience since several aspects must be resonant and if it is ever taken out of tune, the transistors will burn out. Probably not the best option for people with little electrical background. PART 6 setting the detection discrimination level), followed by a pulse counter and/or rate meter. Shown in the first picture is my NIM setup, the second picture is the pre-amplifier attached to a moderated helium-3 tube, the third picture is a bubble detector after being exposed to neutrons. PART 7 Time to turn it on (don't forget to cover any viewports/cameras with lead! Also x-rays can pour out of ceramic feedthroughs so point them away from people. It is a good idea to be monitoring for x-rays where any people are present). The basic procedure is: -Turn on the roughing pump and wait for sufficient backing pressure, turn on the diffusion or turbo pump and wait for it to fully warm up or achieve running speed -Throttle the chamber back (with the valve between the diffusion/turbo pump and the chamber) -Ever so slightly open the needle valve to the deuterium tank -Turn up the high voltage until either plasma establishes on the camera, or you've reached 40kv and nothing has happened (don't forget, you only get one chance in your life to screw up with voltages of this degree) -If nothing has happened, keep admitting more gas and the pressure should keep going up. Plasma should form around 40kv at about 10-15 microns of deuterium. If all goes well, you should see on your camera the image below, and you should be detecting neutrons at this point. Operation is quite a balancing act, since the voltage is controlled by both the power supply, but also by Paschen's Curve and Ohm's Law relating to the pressure in the chamber. Great patience is required to "Get the hang of it", but after doing so it becomes quite simple to run. Operation can be aided by an ion-gun which will not be discussed in this article.

Bros war cry💀 3:16

“3 strikes you’re out” ahh counter caught me off guard

That meow was insane lol

0:03 vine boom

1:56 “cartoon” ahh run

Bro got me choking on my water with these "ahh counters" 😭🤣

Bro every word in this video is Aaaah WASSUP,AAAAAAH OOOHH, YEEESS, my brother thought I was watching some 18+ things💀

I can’t move I can’t move braaaaaaa😂

4:45 nah alphas him, ur himothy

9:49 the timing was so perfect

Funniest 7:01 fade always screams how on horror games

11:48 Bro thinks he is Kaido💀

1:48 “You’re good, but i’m better!” Ahh counter “That’s it, i’m using my special attack!” Ahh counter “Not again..” ahh counter “Die!” ahh counter “This battle will be legendary!” ahh counter “*gulp* he’s not behind me… right?” ahh counter “Well well well..” ahh counter “This is my special attack!” ahh counter “Oh come on!” ahh counter “Let’s fight!” ahh counter “Get over here!” ahh counter “WHERE IS HE!?”ahh counter “He’s not behind me.. right?”ahh counter “I’m going above and beyond!! Plus Ultra!” ahh counter “That’s enough, im using my strongest form!” ahh counter “You’re pretty good..” ahh counter Honorable Mentions From Other People: From TheGoatsCoatHanger “he’s right behind me, isn’t he?” Ahh counter From balls69yearsago “Trust me” ahh counter From sleepysilvi “i am super vegeta” ahh counter From hibaqmahamed2907 “Ugh not again” ahh counter From DtBlakes7717 “Sorry my cat was on my keyboard” Thy honorable mentions will hopefully increase

Yea I WAMTED TO SEE THIS SOMEDAY!!!

The "a mimir" cape made me laugh a lot

LOL 2:30 IS FUNNY AS HELL

*(I’m tired)* 1 like = 1 hour of sleep

Fade always cracks me up with his devious ass laugh lol

The way Mango's missed Death Blow was timed with your hit at 9:49 ...

at 5:58 i think stud made a oopises i heard n word run

5:19 DID HE JUST SAY THE N WORD

I love these moments when they're countering air

3:43 bro that’s so funny my mom was like: get your a in the truck there’s a lollipop

i will do 1 comment for every push-up this like gets edit: please ***READ*** the comment

Doing 1 pushup for 1 like (I'll post it for proof

You know floaty is about to cook when he starts a sentence off with a “Hypotheticaly speaking ☝️😃”

W vid as always keep up the good work man

I will do 1 push ups for every comment like

1:40 "Last but not least... My secret move!" ahh counter

1:39 “Nah I’d win.” Ahhh counter

“that was just a warm up!” ahh counter

Fade, your vids are an absolute W keep it up 👍❤️

I'm surprised fade hasn't lost his voice from all the screaming he's done.

Let's go new video❤❤ love the channel fade u are really funy

I remember you did random moveset that was a amazing video just like this one 😊😊😊😊

Yoo i wondered when this was gonna come out

That “321 IM GA-“ got me died

Nice Vid! Keep Up The Good Work Man!

"I'll show you, wellworks how well this works!" ahh counter

1:40 "theres no way he wont fall for this!" ahh counter 😭 2:00 bro holygrail went to find his dad 💀

4:54 finally someone who says BAO instead of BRO

3:17 bro did his war cry😂

9:48 The timing is insane It like Fade broke Floaty's ribs with perfect sound effect

i like how fade screams at 6:24

2:33 "i am the storm that is approaching" ahh counter

fades screams sounds like little me running from an ant-

YES DO MORE VIDEOS OF RANDOM MOVESETS

Fade bro when u want to use one- time-use moves then u gotta activate "No Awakening" (This gives even these moves a cooldown so u can use it multiple times) And some moves like Pinpoint Cut from Atomic's base need the character to be used (Variants still work like Death Blow fail aoe and Pinpoint cut jump Variant. Moves with no other Variant like Atomic counter DON'T work without the character)

YEEEESSSS RANDOM MOVES ARE BACK

“you’re cooked!!” ahh counter

ig "*example sentence*" ahh counter is fade's signature thing. Right next to "na na na boo boo"

"Na na na Bobo" Those phrases are epic

9:51 was insane when mangos uncountered death blow landed right as floaty got hit in the torso

We need more of this

You know its gonna be a very great day when fade uploads

Wellworks teeth looked like tea packets😂

9:50 it was perfect, perfect everything down to the last my new details

the fact that holygrails voice is so calm

5:57 first time I’ve heard stud cuss bros so family friendly in his channel💀

fade every 1.029 minutes : AHHHHHHAJSN🪰🪰🪰🦅🦅🦅🦅

9:30 it’d the YO YO 😂

imagine if fade said, “yo, i just got a copy of holygrail’s teeth” *plays rush e*

2:33 when i ehard the music and saw him counter i knew what was about to happen yo got me dying on the floor