www.fengreco.co...
The voltage is specified on the main lebel.Before connecting the unit,make sure that the voltage marked on the main label complies with city power voltage.Turn off the main switch when not in use.
1.Plug into a power source,turn on the power switch,you can hear a buzzer sounds.In the meanwhile,the power indicator on the Display panel are illuminated.
2.Press the ON/OFF switch (on the display panel), the Standby indicator is off, and the Ready indicator is in RED.The forming heads are being headted up.
3.IT will be ready for binding documents after 3 minutes, the Ready indicator is in GREEN
WARNING: DO NOT TOUCH TWO FORMING HEADS. OTHERWISE YOUR FINGERS WOULD BE INJURIED.
4.Insert a Nylon tube into the Tube entry .Put the documents under the Drill bit adjust the position of drilling hole.Press down the handle of punching until the Drill bit touching the pad.Model CD-400: It would sound a beep sound after the Drill bit touches the pad.]
5.Take a short Nylon tube from the tube tray and insert into the whole just drilled.Move them to the left and place the nylon tube between two Forming heads.
6.Insert the Location pin through the nylon tube,Press down the Handle of binding about 3 seconds and lift up after hearing beep sounds.
7. The documents is bound well.
8.The machine has a funcionof Energy Saving.If there's no movement of binding within 25 minutes ,or Press ON/OFF switch (on display panel)for 3 seconds the machine will be in the mode of working,operate it according to point2. and 3.
9.You also can operate easily under the instruction of figures on the workbench
We strongly suggest to empty the waste bin timely in order to avoid being damages by stuck.
MAINTENANCE:
* Please unplug the machine before maintaining or cleaning.
* To clean the exterior of the machine,wipe with a soft cloth dampened with tap water.But prohibit the liquid to flow into the inside of the machine.Forbid to clean the forming head with wet cloth.
* The machine's cabinet is a plastic product.PRohibit the use of organic.solvents (solvent as gasoline) or decontamination agent to clean the plastic parts.
CAUTION:
**Never punching paper over the permitted capacity each time. Otherwise it could damage the machine
**NEver punching any material (such as moist paper,fabric,glass,metal,material, etc.) except dry paper.Otherwise it could damage the machine
17 сен 2024
