Firefighter Forcible Entry: Pulling Hinges from a Metal Door and Jamb 

I salute all of our fire fighters in the world,you guys are true heroes and I and I know every other living human being in this world would like to thank you for your bravery and courage.

Thanks everyone for your comments and feedback - To clarify we DO NOT recommend pulling hinges; If you watch the ENTIRE video it should give you a perspective why. YES a rotary saw is a great tool and one that we recommend bringing up to the building as it may be your first choice and/or best option, but remember this - The "IRONS" won't run out of gas, can't flood when starting, are easier to carry than a saw and can work in a smoke filled environment where a saw may not.

This video was very helpful to me. I really appreciate both of you going out into 15 degree weather to show us FNGs how its done. Thanks a lot!

Dale. Keep this up. I've already noticed doors in my first response area that are shoe-ins for this technique (Pacific Coast Steel Co., even the Children's Hospital fire exits, etc). Thank you, and keep up the good work!

Thanks for the excellent video and for showing both the procedures that work as planned and the ones that don't.

Got a Halligan drill coming up and this information really will come in handy for different ways to use the halligan for forcible entry in the field. Thanks for the information and demonstration.

Love these videos. Excellent presentation. You obviously teach classes in person. So to secure a house I should get metal doors, security hinges with pins, and a good locking system with metal guard plate. But then ppl will just go through the windows lol.

D-pekel fell in the snow at 8:15-8:20

Thanks for taking the time to make these videos, they are very helpful

I have just a detailed video of the installation of a floor hinge fireproof steel door. thank for watching!!

In Germany we've only bought the halligan tool and its equipment. There is no possibility to train how to work with it, but your Videos are a great help for us! Thank you very much and greetings Form germany ☺

Not a firefighter, rather im a locksmith. Forced entry videos are super interesting, as it uses methods that would be unthinkable in my trade. But it's really good to know that those attacks are possible and used (even if rarely). I have been to lock outs where i have had to cut hinges off, which sucked, but i have never needed to use a halligan.

Glad to have you in Wauwatosa FD keep it up!

Good stuff Dale...We trained our people on this technique years ago as an option in the DCFD at a Civil War era hospital with much thicker hinges and longer screws than we have today. When we got to the point where the Halligan couldn't pry out the hinge, we took another Halligan and placed it's forks behind the original and drove this bar too. It worked quite well. Give it a try next time you drill if you haven't alrady. Like all your videos and follow you

nice! now off to the neighbors house.

Thanks again, these videos are great pieces of information. Lots to learn from you.

If your pulling the hinges on a metal door, striking the door next to the hinge will dent the door and start to pull the hinge screws out of the door. A potential plan "B" is to move the halligan side to side once the fork is in place over the hinge, one ff on each side of the halligan, this will do some major damage to the hinge screws. Great video Dale!

I love the halligan bar. I’m a sheriff deputy and I carry a set in my squad car

Thank you for this informative and great video.

I don't like the idea of pulling hinges, but if the situation warrants it, this is a good video to show the best way!

Great video got some good pointers. Thanks and keep the videos coming.

Great video, thanks guys!

Good video. Another great idea to have in my toolbox on the dire scene

this looks really fun

4:23 "I'm not a tall guy, I'm only 5'10" --> boy I am 5'4, who's not tall? ;') (Great video FYI)

Im actually taking 2 forcible entry classes this week. Found this to be helpful. Had no idea you were from elm groove lol. Im on lannon fire department. Good stuff keep em coming.

REMEMBER to Rock the halligan side to side to loosen the hinge. Along with prying outward

Awesome video!!!! Thank You!!

Great video Dale, although watching it I'm glad I'm in Florida. Thanks again.

great video, keep'em coming..

Thankx for this video it was very helpful

Dale as usual an excellent training video. And looked a little cold while videoing!

A company called Carolina Roller makes this thing called a travelers hook. It costs 1$. I learned about this tool watching penetration test videos. Defcon videos. The travelers hook will not work if there are drop bars or added dead bolts but on some doors it is possible to use a travelers hook to simply move the latch bolt out of the way and defeat the door within 5 seconds. It may be something to try first on some doors in the future. Super light small and cheep tool. Also it would work right away or not at all so it wouldn't waste a lot of time on a useless attack. Mainly useful on doors without added drop bars or dead bolts.

Great job

another great video :D

Well Done!!

good video guys!

Good Stuff Dale.

Excellent, Dale! Say, no out-takes? Fair amount of snow on your back side there! LOL!

Holy shit, this is a technique reserved for the pros.

It's a hooligan bar👍

This looks so damn satisfying, i want to be a firefighter so bad.

Thank you

Good advertisement for jamb pins!

very good

south eastern Wisconsin? im from south central Wisconsin, lol, love your vids, they help a lot

Good afternoon gents, have you ever tried striking the hinge on the side not from the top, as in hit it so the hinge goes backwards into the door? In theory there would be enough movement to loosen or shear the screws? Have a great day.

on doors wear the hing will not come loos wedge the gap in the door and use this to try to pry the door open the door will not open but will loosed the screws a little and give a tad more room then going back to attacking the hings should not make it ezer and faster to remove. also you can hit a hinge from the sides to help loosen it up

Thanks for the video................................................... & Thumbs Up :D

Nice!!

While this makes a lot of noise, it just shows you how relatively insecure even metal doors and jambs are. People actually worry about someone picking a lock versus someone doing a physical attack.

Great video. Thank you! Odd question, is your helmet a 1044? Looking to get one soon.

Silly question, could you use hydraulic spreader there between the concrete block edge & the hinges? I'm guessing going back for power tools isn't the focus of this video though.

K saw, Many places weld the hinge in to prevent theft.

Most commercial buildings will have a more heavier fortified rear door. Including many times fox locks & "fort apache" drop in bars

Does anyone know if it particularly matters if the curve of the bevel is curving into or away from the jamb? Curving away may make it go onto/behind the hinge a little better but if the tips curve INTO the jamb I could see how it gives a little more elvergae with the ends biting into the jamb.

Nice

Great video! How is your axe holding up to the abuse? I'm considering buying one of those for myself....is it worth the money?

Quick question, would pulling hinge pins be viable? while some can be a security type, I have to wonder about run of the mill hinges, because at my house, those pins love to wander out of the hinges...

como se puede poner subtitulos en español???

You guys know about using "S" hooks to keep doors open right?

If there is ever is a bank fire. Because of this video I'm prepared

Great info for the general public to know - which includes the shadier side of humanity.

your bunker gears looks similar to Singapores SCDF firefighters :)

Can u make a video about breaking into a bank i want to be prepared just in case

thanks better vor my next robering

Battery angle grinder ?

As somebody that worked in construction and not firefighting. The first thing i thought was a Sthill saw or Grider to cut straight to the pins fist. Then it was mentioned at around 08:30. and so I was just wondering what the method is to start? Once you decide you're going for the hinges and not the lock side, do you start with the saw/Grinder or is the axe and Hallagan bar the first stop with the power tools being a secondary? As it looks like you're using a hell of a lot of energy braying the hell (quite successfully I might add) out of the hinges when 4 cuts to the pins and then prying the gap then bigger would look possibly easier and quicker? Of course i understand the need to know how to do this should any number or reasons for the saw to decide you're getting work out should occur. I was just wondering what the order of tools is? Again, this is just the observation of somebody who has done similar but for different reasons and we just do the easiest thing, nobodies' life is in danger, and we just don't like the effort of sledge hammers and chisels, so the grinder or saw would be the first port of call. Any replies are appreciated from people with more or deferent experiences. I'm just here because i think this kind of stuff is really cool to know and see how it works.

Cordless reciprocating saw will also cut the hinge off.

Is this an old TAPCO building. I ask cause the "employee entrance only" sign says tapco and looks like their logo in front of it.

Thank you it help not Vol-Company have K-12 Another great idea will put it to used

just a thought, coming in at an angle with the gas cut off saw on the four outside hinges, then pry out.

What about if you had an emergency with a heavy duty door equipped with mortice deadlocks, after hinges have been removed would the door pry out from the jamb as easy?

Not the non-destructive method I’m looking for. I just have a bolt broken in the frame, I’m not try to break in.

What about a battery powered angle grinder with a zip-cup disk? I could see it taking 15 seconds per hinge... much less destructive as well but I don't think that matters lol

What is the reasoning behind starting with the top hinge? You're reasoning is sound, just wondering about the reason regarding the other opinion.

HERE’S JOHNNY!

thx im safe new

Why not just attack the hinge pins? This looks like way more fun though.

In the Army we would use a LAW (light antitank weapon) to open a door that tough.

After hearing about the Texas school massacre and the cops not being able to get in class because steel door was locked, how long would that take a firefighter to get through? Thanks

Nice video! Why not just use a cordless angle grider with a cut off disc? Maybe even cut a access hole in the door?

Hi DALE

This looks like so much fun. Smashing shit with an axe. Hell yeah.

how about a portable air chisel

now I want to break a door

"Dem doors that was close, I rip da doors off and I took the hinges off and when I took the hinges off, I put the hinges in the fuckboy's hands. Yeh. You know I... I took the whole door off and the hinges and put them in the fuckboy's hands. You can put the hinges on the hands too." -DJ khaled

Next video forcible entry with circ saw? Lol

EZ

SAW

Just grab the k12. It solves almost any entry issue hahaha

I wish we could trust police like we do firefighters.

..

Well, this is something you won't see on german doors. No hinges anywhere outside of a building.

Good door to stop cops🤣🤣🤣

Great video, hopefully no felons are watching. Would be great to create private groups or put it behind a .gov login.

I actually searched for this 😎😎😎

crush it\

лсфд ку

I'm watching this because I locked my self out of my house. jk.