First Impression: Pica Marking Tools || Dr Decks 

What people don’t understand is no matter how fat the line, you always cut the side the square was on,that line could be a half inch wide it would not make any difference because you’re only going to cut on one side. That is your straight side. By the way I use Pica as well. Also I have seen several videos on Pica and I believe this to be the best.

Here I am in my mid 30s getting excited for my pencil to come in the mail lol.

I have been using the pica dry, love the pencil, the hidden sharpener in the cover is awesome, and It stays in my pocket and never falls out.

I use one & they work very well. I've had mine now for over a year. Great product

The big advantage with the Pica is not having to pause to whittle and not dealing with broken tips all the time. One lead lasts a long time, longer than one wood pencil for sure.

I’ve had the Pica Accuracy for a couple of years and like them. Bought one for my daughter for drawing and art.

Just a thought, I have one of these and you don’t need to press so hard. Pressing hard just wears the tip faster and leaves a line 5 times what it should be. Light pressure is all that’s needed. 👍

A great demo this man!

This product is awesome I'm an electrician pipe bender and use this tool on a day to day basis love it.

Just got mine in the mail along with the pin one. Works great.

Great pencils. i use both for work. One thing I found is that working in the rain, the lead gets soft and wears down very quickly.

I love these pencils and marker , it saves me so much time because I actually wear them in my pants pocket so I’m never looking for my pencil

I like the switch to the blue marker when extending it. Probably had some laughs about the old dogs red lipstick 😂😂

I load my lead from the front, just push and hold the other end, saves you taking the lid off at the top. GREAT PENCIL.

I am a industrial electromechanic. We fix all sorts of machinery at steel mills or nuclear plants, refineries. Whatever. Expert area is electric motors and drives, we revise and repair em. Even to the point of rewinding em by hand. We also sell and service them, align them and maintain other gear. I have the pica dry the deephole marker and the pica “gel”. The dry needs no introduction great pencil, usable on lots of materials, tough, resistant to oils and greases, nice rough texture but easy to wipe down after a day in the dirt and grime. Deephole marker is great for when we have to make gaskets ourselves for reduction cases or pumps. You can really get nice and deep in the hole to the edges and around the part up close with its fine point. Then You cut out the gasket and see if it fits. Great tool! Better than a marker or a Bic pen lol. The Pica gel is a replacement to tube paint. It marks on EVERYTHING and doesn’t go off. I use it to put markings on parts to make sure they are oriented correctly upon assembly. It gets pressure washed and we even tried it in the burner. We have a burner that burns the corpses (the dead motors that are either scrapped or rewound, they get heated to 850°C.) So the insulation and tropicalisation varnish gets out. That we use hacksaws to remove the old burnt windings (copper is recycled) and make new windings if the customer demands so. They say the markings last to 1400°C, I tested them at 850 and they did fine 😂 Sadly its non-refillable I think, there is a sharpener built into it to get the point back. I guess they should put it on the Visor as well. TLDR: great products, usable for heavy indsutry, metal working, carpentry even the home gamers. robust, practical, affordable and easy to identify due to the different sheath colors!!

Very cool product offering. Do they make a scribe to fit these marking tools?

Yeah bro these are the best

Where can I find the magnetic marker that you wear around your neck?

I just watched 18 minutes on a pencil.

how do they hold up to stone?

Hello, drdecks! What do you think about Swanson Always Sharp pencil?

Is marking it twice necessary or just an OCD thing?

I've got them all and just don't work for steel work at all. Can't they make a chalk version

Can we get a followup anytime soon?

I like red and black pencils they come and soft medium and hard they come from Ace hardware stores

Love it gotta get me some!

Y'all need to get some pack outs lol

I like the 2nd one with the wide " lead". But, i bet they are pricey. I'd love to have one plus some refill leads.

👍

Hello dr 😇 pica is one of the best on the market (there are few more companies that makes a great stuff). But more important - what is the name of the pen-holder you use for your drdeck pencil??? 😅

That’s to bad you had to cover the red with your towel and then mark the white right over it. Don’t try to hide the staining of the water soluble red

-"its blå kläder!" -"that's what I said, bla klader"

After 11 min you still didn't mention the biggest problem with the basic carpenter pencil. Why buy a Pica, one word SHARPENING!!!!!!!!!! I'm so blanking sick of trying to sharpen a carpenter pencil, it never comes out right, time consuming, cant find knife, knife is dull when I do find it and then pencil shortening...... Critics layouts require sharp pencils and with carpenter pencils it's a pain in the - - -.....

Checked Amazon...those Picas aren't cheap. Are they that much better than a 49 cent pencil?

With most carpenter pencils their made for the purpose of using the pencil as a gaping tool, 1/4”and 1/2” width. Also there are different ways to sharpen a wood carpenter pencil for different application. How does this pica pencil have these same function? I would say for a breaking purposes it might be a better pencil but for the over all aspects of the different ways a carpenter pencil can be used for, I don’t see the functionality that a pica pencil can match up to!

Pencil is great but the fine marker sucks

It's basically a redesigned Caran d'Ache Fixpencil invented in 1929

Soon all our tools will have CSGO skins on them.

Free pencils?