Тёмный

How To Replace Your First Quarter Panel (DIY) 

AUTOBODYTECH
Подписаться 10 тыс.
Просмотров 13 тыс.
50% 1

Check out my shop for all toolslinktr.ee/AUTO...
2018 Honda Civic 2DR Quarter Panel Skin Replacement
Have you ever had your vehicle repaired and found yourself curious about the intricate process behind it? Wondered about the details, the complexities, and the effort involved? You're in luck because this video takes you through the entire journey. Explore the comprehensive process of replacing a rear quarter panel skin with an OEM one, and witness the skilled labor and expertise required to make it happen.
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the tools through them I earn a tiny commission. It costs you nothing but helps me big time.
Mcro Grip Clampamzn.to/3TOC7NX
7 Piece Dura Block Sanding Kit:amzn.to/48xvNj3
Steck Quarter Panel Puller 20022:amzn.to/48NjvCJ
Astro Pneumatic Tool 930 Mini Reciprocating Air Sawamzn.to/41SYQeq
Sunex SX8200 Surface Blaster Kit:amzn.to/48J7Swz
The MAXI - 220v:www.dentfix.co...
Evercoat Rage OPTEX Color Changing Filler:amzn.to/3OhiHhR
Evercoat 425 Metal Glaze Ultra 30oz:amzn.to/492KXg7
Canadian Tool and Supply 7-Inch Air Angle:amzn.to/3tJ2zOQ
Wurth 1/4" ANGLED 90 DEGREE DIE GRINDER:shop.wurth.ca/...
Mirka MR-6 Finishing Sander:amzn.to/3vrjje5
Body Line Tool:amzn.to/3tNoZP1
Martin 1024 9" Blade Surfacing Spoon:amzn.to/3SbJ8I5
Uni spotter 5500:www.toolsource...
3M Belt Sander:amzn.to/48qO4hI
Milwaukee M12 FUEL 3/8 Stubby Impact:amzn.to/3H9va2V
#autobodytech #autobodyrepair #automotive #migwelding #spotwelding

Опубликовано:

 

21 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@jerryhuff86
@jerryhuff86 3 месяца назад
This guy is good. Feeling very humble right now 🎉
@JefforeySiegel
@JefforeySiegel 11 дней назад
F@cking mint man! She will be all shiny and minty!! Cant wait to see more
@daniellucasrodrigues3848
@daniellucasrodrigues3848 5 месяцев назад
Very very very good man!!!
@AUTOBODYTECH
@AUTOBODYTECH 3 месяца назад
Glad you think so!
@EnayatAyazi
@EnayatAyazi 3 месяца назад
nice job man
@AUTOBODYTECH
@AUTOBODYTECH 3 месяца назад
Thanks!
@peluche206
@peluche206 3 дня назад
⭐️ ⭐️ ⭐️ ⭐️ ⭐️
@jerryhuff86
@jerryhuff86 3 месяца назад
Man! This guy could make $2k a day. I bet ya.
@god_mode_on
@god_mode_on 7 месяцев назад
Just a couple spot welds eh haha! What air saw blades do you use? I've been using the snappy ones but they aren't getting any cheaper these days
@AUTOBODYTECH
@AUTOBODYTECH 7 месяцев назад
We use cyrotool and sometimes Lenox from our local supplier
@screefus
@screefus 11 месяцев назад
Really good video man! might be worth putting the make and model in description for SEO. also just curious, did the original estimate have a used quarter first?
@AUTOBODYTECH
@AUTOBODYTECH 11 месяцев назад
Thanks for the advice ! And nope. We use only OEM for any replacement that involve spot welds
@screefus
@screefus 11 месяцев назад
@@AUTOBODYTECH I don’t know how many supplements I have put in to change from used quarter to OEM. The only way some insurance companies would justify it was the crimp in the wheel well. That’s in NE Oklahoma
@masterflow101
@masterflow101 11 месяцев назад
​@screefus you're from Oklahoma?
@screefus
@screefus 11 месяцев назад
@@masterflow101 yes sir. Born and raised.
@agame4687
@agame4687 10 месяцев назад
What airsaw is that?, nice work.
@aftabazad371
@aftabazad371 11 месяцев назад
What is the the significance of having so much foam In modern cars as seen at 8.25 Could cause rust issues in the future Good video as always btw 👍🏻
@AUTOBODYTECH
@AUTOBODYTECH 11 месяцев назад
The product being applied at 8 25 is a structural adhesive. The car isn't designed to have any welds here. The following product is a seam sealer over the foam. This is a multi function to help with vibration of the panel and also a sound dampener
@aftabazad371
@aftabazad371 11 месяцев назад
Appreciate your reply Majority of new cars have the similar foam seal
@JustSaucy
@JustSaucy 4 месяца назад
How much do they usually charge for a job like this
@AUTOBODYTECH
@AUTOBODYTECH 4 месяца назад
About 3000 to 4000
@bgswansonlocc
@bgswansonlocc 7 дней назад
Belt sanding in lieu of drilling spot welds appears to be the way to go.
@AUTOBODYTECH
@AUTOBODYTECH 7 дней назад
Yes, 100%. Unless you are re-using the panel. It puts much less stress on the body and is much more efficient
@bgswansonlocc
@bgswansonlocc 7 дней назад
@@AUTOBODYTECH I actually am reusing the quarter panel. I was thinking even using this method I could mig weld it back on. I know drilling/chiseling the spot welds tore the flange to hell. To repair the flange was thinking to butt well a new piece on.
@AUTOBODYTECH
@AUTOBODYTECH 7 дней назад
@@bgswansonlocc good luck with the repairs!
@jaxtorx
@jaxtorx Месяц назад
How did you know exactly where to cut on the new quarter panel? I saw you mock it up on the car. Did you mark the edges of the cuts on the chassis and then use tape as a straight line from point to point?
@AUTOBODYTECH
@AUTOBODYTECH Месяц назад
I was following the OEM procedures that I had printed out. It tells you exactly where the cuts should be done. I have other videos on my channel that may go more into depth. This one, I did not do a narration
@MrEcortez16
@MrEcortez16 2 месяца назад
Do you know the guage steel this is? Im doing some repairs and have to get a welder but want to know what capability welder to get on a budget
@AUTOBODYTECH
@AUTOBODYTECH 2 месяца назад
@@MrEcortez16 likely 23 or 24 gauge. Check out the arc captain welder if you're on a budget! Check out the video review on my channel
@ivanelgordov9099
@ivanelgordov9099 2 месяца назад
Hey man what are those clamps for the inside of the door to hold the new qtr panel?
@AUTOBODYTECH
@AUTOBODYTECH 2 месяца назад
They are the micro grips. Here's a link to them: amzn.to/4cZyzzi
@ashramdhan1582
@ashramdhan1582 9 месяцев назад
How is the belt sander what state you work bro you do great work.
@AUTOBODYTECH
@AUTOBODYTECH 9 месяцев назад
The belt sander is amazing. I love it. It does use up batteries quickly, though. I'm in Canada 🇨🇦
@ashramdhan1582
@ashramdhan1582 8 месяцев назад
@@AUTOBODYTECH wow you in Canada bro you go great work you would be doing good in the states they pay better here. I have the die sander in Milwaukee brand and indeed the battery life sucks but I was curious about the belt sander because I myself use an air belt sander.
@AUTOBODYTECH
@AUTOBODYTECH 8 месяцев назад
@ashramdhan1582 thank! The pay here is great as well. I also use the 3m pneumatic belt sander it's also really really good!
@ashramdhan1582
@ashramdhan1582 8 месяцев назад
@@AUTOBODYTECH that's good to know. Thanks. Can you do a better body filler video on bigger panels I want to see your mod work better.
@AUTOBODYTECH
@AUTOBODYTECH 8 месяцев назад
@ashramdhan1582 I will definitely have a chance to do more, I think the biggest one I have is the red Volkswagen GTI on my channel. Check it out if you haven't already!!
@jerryhuff86
@jerryhuff86 3 месяца назад
Like a hot knife through butta Ma.
@ovidioleon4961
@ovidioleon4961 4 месяца назад
Era mejor enderezar el.golpe....pero de.esa forma.en que lo haces producirá mucha oxidación la soldadura que esta al otro lado del panel
@Vene_Ler
@Vene_Ler 6 месяцев назад
6:10 Please name or p/n of that clamp ???? 6:10
@AUTOBODYTECH
@AUTOBODYTECH 6 месяцев назад
Here's my Amazon link to the clamp amzn.to/3TOC7NX
@hassmaz5418
@hassmaz5418 2 месяца назад
That wasn't bad damage it could've been easily fixed with Pdr Technic
Далее
Replacing A Civic Quarter Panel!
9:30
Просмотров 157 тыс.
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 6 млн
Restoration rear fender Toyota Camry
10:52
Просмотров 4,2 тыс.
Could you really GLUE a Quarter Panel Together?
13:56
BODY FILLER /BONDO TIPS and TECHNIQUES for PRO results!
23:16
How to Vinyl Wrap a Door Panel (OEM)- Car Upholstery
47:33