Finally got around to running an op with the new DMM DYN4/750W servo spindle motor. Very much impressed over the old Consew 550w motor. Had a few brain farts making the video. Forgot to setup the camera and completed the first op before turning it on. Also thought I'd made a mistake on the tool selection cutting the perimeter. So a little bit of a wait from cutting the center hole out to cutting the perimeter as I forgot which tool I used.
Speeds and feeds were 2100mm/min (~82 IPM) for all milling ops with 20% step over. Drilling ops were ~15 IPM rapid drill. Since it was the first real test with the new motor, wasn't trying to push too hard till I get a feel for what more the motor can do. Definitely happy with this setup and didn't notice any motor strain. Some of the vibrating metallic noise in the background is the Z axis cover rattling a little. Need to see what it's vibrating against and see if I can stop that.
As usual, visit the Taig Facebook group for more information. To purchase the heavy duty frame from Stuart Andrews or the R8 spindle from Jarrett Grover, links are below.
Frame - goo.gl/forms/H...
R8 Spindle - goo.gl/forms/1...
30 окт 2018