First TIME ever, 3D printing at that 45° angle mode, live at Open Sauce! 

Jon, you are THE ONLY 3D printer RU-vidr that knows how music is supposed to be mixed into videos. Really great work!

I love how English swearing is censored but Dutch swearing is fine :D

I love the story telling. I can't get enough of your content man :)

I really enjoyed seeing this printer at Open Sauce. Thank you for bringing it. Once it’s working, don’t try to print Dutch shoes, because you may get clogs.

As a dutch person I love the banter lol. The subtitles don't do it justice.

I'll watch even 1h videos from this channel happily. BRING IT.

"I cannot sit anymore, but at least I'll have a spool holder" Spoken like a true engineer 😌

I have the feeling, that heating the Bed with 110V would have been the easier solution, even witout PID tuning.

This is why we love Jón! The most original and unconventional ideas and a creative approach to accomplish your goals. Keep going, Jón, you're one of the few with actually interesting and original content. (en het vloeken maakt het voor ons Nederlanders extra leuk)

Being a maker for at least 60 years, I really wanted to go to Open Sauce but couldn't afford the ticket price so I'll just have to settle for watching YT videos of the event. Great job on the build Jon. You're always thinking outside of the box. I live only a few minutes from the event center so I would have ran home and brought you a spool holder (been 3D printing for ten years) and anything else you needed.

I watched from start to finish and THEN realised it was 40 minutes long. It was such a good and easy video to watch i love it. Cant wait to see those shoes come to life! Keep up the good work man 💪🏻

It was really cool geting to chat with ypu at open sauce! Glad to see your pritner in action finally! We spoke friday morning and after the show Saturday and both times the printer was partially disassembled. Also i had build plate adhesive at that show the entire time wish i would have known you needed it. Hope to see you at opensauce 3 2025, keep making cool stuff!

40 minutes of good ol' Dutch swearing 🤣 HEERLIJK!

This is how every project goes. I love the raw cuts. makes it feel real.

"You know you are on your own when Thomas is out" 🤣😂

All the *real ones* came by to check out your project. Engineering superstars. Absolutely love it mate!

Everytime you say there is a big project comming up I feel like I need to tell you " No need to tell everyone we all are subscribed because we know there is always something big coming up!" Nice work and even if its not the usual type of content you make thank you for taking us along with it.

Dude you are a legend you are doing the most interesting things in the community and the community is lucky to have you. I really admire your work 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

I can sympathize with literally everything going wrong at the event😅 great video seeing you push through the issues

With all the Expectation Management at the beginning, I was prepared for the whole thing to fall into a heap. But Dude, you managed to get the damn thing to work by the end of Open Sauce! Frankly, I don't give a damn that the phone case failed to finish. You got over the finish line.

All it took was Wren to say "Hi" for Jon to break down and spill the beans on his big secret! 😊 Great video as usual, gutsy to break down the printer and assemble it during sauce, but you mostly got there in the end! I'm really looking forward for videos on this build and the end result!Always lovely to see how supportive the 3d printing community is :)

Indeed the community of 3d printing is indeed something unique, very wholesome, supportive, smart and open minded people!

Awesome job! Don't forget you're the very first RU-vidr wo is not filming but instead printing (*drum roll*) using Dutch angles 😄

Ik heb deze video naar al m'n vrienden gestuurd, heerlijk genieten. Geweldig om zo veel geweldige mensen tegen te kunnen komen op zo'n Drukke en dichte plek. Een vleugje prachtig nederlands gekut en gepruts. Laat mensen niet je vocabulaire weg pesten, wees trots op je Nederlandse gift. kijk uit naar de volgende. 😂

Took me until minute 13 to realize that the background music wasn't actually captured live. xD Brilliant production quality as always!

I love the 'plat Nederlands' being spoken in this. I moved to the UK from The Netherlands 15 years ago and that's one thing I miss here, there is something genuine and honest about it.

Jam packed with stars. Congrats on persevering through!

You have without a doubt my favorite printing channel, keep up the amazing engineering and design work as it's what makes your channel stand apart from the rest. Showing all the failures makes the successes so much more satisfying.

I really enjoy how quickly you switch from being pissed off to being nice to the attendees. I wonder if using one language for frustration and one for socializing helps. 😂 Great stuff man really look forward to the next video.

Truly inspiring! We have so many makers that use 3d printers, but not enough inventors that make their own 3d printers! Cheers Jón

Jón, your pain is... well it is pretty hilarious. This video was fantastically well edited. Thanks for sharing your efforts with the rest of us.

I love this. This whole adventure totally captures what it's like to try and set setup a live demo in front of an audience.

"I will never do this again." ...Well, not until the _next_ time and probably not the same way. Full respect for your efforts to solve the problems in a high stress environment like a convention with thousands of eyes on you live. You're not a bad person for borrowing that rack, you're a maker solving problems and that's the spirit of the convention.

Never clicked a video so fast

Your pain is our gain. Thank you for trying and putting yourself through that much stress and more so for recording it and sharing it with us. :)

Awesome ad for gloop! They helped you and you helped them, I love it

Jon, you did the best you could, and besides the awesome printer you had a video of who's who in the printing world. I was honored to meet you and spend time with you at ERRF 2022, my grandson still talks about you and Max.

Love the Varioshore TPU, we use it to make tyres for our model cars! It's really cool that we are able to make diffrent shored prints with a single material!

I don't know how you did it, but I was hanging to the edge of my seat. NPO documentary worthy. Cinematography well executed! 🙌

His cheeky smile towards the camera at 10:06 is gold 😂😂

James is awesome. Such a clever dude.

Absolutely love channels that put this amount of commitment in. Well done and thank you for sharing :)

I love that you show the struggles and failures of 3D-printing. It makes your succsess hit much harder! Keep up the good work!

We all hope things go smoothly, but it is the times we overcome obstacles that are the most epic adventures! Great job plugging through and doing something cool and even better story telling.

I had so much fun watching this video of yours, with you speaking your home language. I am Afrikaans from South Africa and I could actually understand some of what you where saying. 😄

So many awesome people coming by to check and help out...most of my demo projects never worked at the festivals either due to being too last-minute...but glad you got 90% of the way there.

Fantastic journey. Dont give up!

Very excited to see you made it to open sauce! Hope you had a good time

adventureeee! hahaha good stuff

Very nice and also cool thatbwe saw all those other creators and vendors which tried to Help 😊

40 minutes, what a treat!🎉

"and I will never do this again." make sure to save that clip for later 'choices'. But really fantastic video. It is often so much more informative and interesting to see someone's failures and how they handle it rather than their 'instagramable' curated successes. And I loved seeing everyone from the community joining together to try and make it succeed. Great video as always.

Als Hollander is dit geweldig om te zien en verstaan 😂. Je bent echt een voorbeeld, dus blijf vooral doorgaan met al je maffe ideeën realiteit te maken!

Hahahaha je frustratie met het opbouwen is zo voelbaar. Love it. Great video once again, good to see you being real! No progress is ever made without frustration and a little bit of 'tegenslag'. KEEP IT UP

3D Printing is always a challenge. Sometimes, sht happens bruv. You did the right thing, solve all problems, adjust everything. At the end of the day, the event was finished, and YOU WERE THERE. Hope to see more videos of you, fellow maker.

What a great Video. For me you fully succeeded. Thank you so much!

My favorite printing channel. Not for the crazy builds, not for the flawless execution, nope. It's cause we both be cussing like sailors. Love it.

Long, but very awesome video from this unique printer at OpenSauce!

This is how 90% of my projects go. The other 10% don't even start :D Yesterday I had to replace a micro USB socket, the one every YT repairer can desolder in one minute and solder in two, just use flux man. It took me 4 hours and I've ripped 3 tracks off in the process. Oh, and the device doesn't work anymore for some unfathomable reasons. So this video is the best thing that could happen to me right now, thanks Jón.

Glad I got to see you work on this at Open Sauce and even more glad RU-vid recommended me your channel as I hadn’t seen your work before then. Incredible work!!

The best 40 minutes to start my weekend. Thank you Jon.

super tof! Gaaf project om te tonen!

I love your videos and amazing ideas. You are a truly an awesome dude! Keep it up!

This was great, and was in my feed several times and i was like, man 40 minutes? But this was just great the entire time. Great stuff.

This is one of the best vids.

Love your channel and work. Ordered the shirt and mug :)

it was great meeting you at the show. I feel bad now asking you for a photo... you had so much work to do and be focused on! I think the story of this printer project isn't the printer... but about never giving up. Thanks Jon.

I don't think your subtitles do justice to the linguistic poetry on display here.

Was awesome meeting you at open sauce and seeing your printer! So sick!

Fantastic perseverance. much respect

This 100% explains why I couldnt find you after the panel to chat behind the 2nd Stage chairs LOL. Great job! I hope to get to chat with you more next year! I need to spend more time in the exhibit hall!

"I will never do this again..." Jón, I know you weren't referring specifically to the printer but more to the idea of trying something untested live at a show. However, I think this sums up why you are always coming up with fresh ideas. You courageously tackle an idea regardless of the odds. You don't dwell on "failure" but learn from it. You keep a concept but approach from a different angle. Keep it up.

0:41 Awesome to See Wren from Corridor Crew in this video..... What a colab this could be if John could do some design and 3d Work for Corridors crazy vfx and even stunt videos.

I saw your photo with Adam on Instagram. I felt very envious of being able to meet one of my idols, well, you are another one. greetings from Spain

Awesome video and amazing story! Loved every minute of it and can't wait to see you print your first pair of shoes!

Man, you're an incredible source of inspiration... very cool.

Even James Bruton, who I consider to be a little bit crazy, was looking at your printer as if to say, " this guy is nuts.." 😅 Love James' channel, and glad I just discovered yours. Great content and pretty inspiring.

Great to see you passing 100k dude! You absolutely deserve it! Top quality video's!

What an amazing(ly ambitious) project! Super cool video, I love watching your content! Thank you so much for the inspiration and keep it up!

Ohhhhh man…. The minute you said “I won’t be able to heat the bed” I was like “…..I hope he’s only going to print TPU….” Love this video though! You’re a hell of a storyteller

Excellent Smithers ... excellent.

Mitch and Jon, that could be a crazy combo.

All the foibles of prototyping. And you were willing to take that on the road too. Seems like you'll get there eventually.

Nice to see Im not not the only one swearing while building things

“Dat snapt niemand” altijd wel leuk een Nederlander 3d printen te zien ^^ erg indrukwekkende drukker!

Current Jon: "I will never do this again." Future Jon: "Remember when... Here we go again." What's so amazing is that this is the reality of how great things start, you said it perfectly on the panel. Taking this printer to open source really made that next step towards this being a future solution to the world.

I'm proud to be part of this community!

Epic project! Looking forward to the 3D printed 'fancy' shoes! 3D printed shoes in general, the colorfab varioshore seems to be cool material!

MAN! I must have walked by your booth 10 times a day and missed you every time! BUMMER! Really wanted to say hi! ... was helping @90percentart75 straight across from you. Like you said, the community at @opensaucelive was/is absolutely amazing! See you next year!

Awesome video

Engineering is fun but problem solving on the spot with limited resources can also be a fun experience :) Great video as always, stay awesome ;)

Awesome Video man ! I love how Steven was next to you :)

Great work Jon. This video was awesome as usual. But the overall message of this one was amazing. I think a great deal of genius is lost because we become trained to think that it has to make sense. The biggest leaps forward require us to let go of that training. Afterall, it wouldn't be a big leap if it was obvious and made perfect sense to start with. Bravo Jon!

The cool thing about swearing in Dutch is that nobody understands what you are exactly saying. And the huge repertoire. Had it at a ski holiday swearing and calling names at the ski teacher trut. Just one British guy who had lived in the Netherlands for a few years understood me. And laughed his socks off and bought me cold one.... About the video, also cool to see you at work under this much pressure. Hence the swearing off course, but in the end you managed to print at least something. And learned a lot. I loved to see all the guys I use to see at other channels like Marius Hornberger and Alec Steele. Besides the expected guys like Thomas, Prusa and Stefan. I hope that your shoe project will work out great , with the normal 240V and better bed adhesion, looking forward to that. As usual a great video, Jon, keep it up with your pioneering, tinkering, humor and even your swearing. Greetings from the city of TT and Truckstar 😄

ah, your so close!! yeah, i know im late to this but this is awesome!

Yep man nou dat is een professionele manier van printen. Jouw manier van denken is fenomenaal 😂. Dankjewel voor deze voorstelling ik geniet ervan. 💪🙏

Dutchman at his best! Next time for better bed adhesion: bring Kartoffelsalat! 😂 Great video! 👍👍👍

This video is so entertaining. I reily enjoyed it so much. Cheers. Mike

What a mission! You overcame so much in a short period of time, always thinking on your feet, super inspiring! Looking forward to the shoes 😏

Cursing your way through problem solving, it's a Dutch thing!😂