FISHER F-PULSE PINPOINTER REVIEW, HEAD TO HEAD TEST WITH OTHER POPULAR PINPOINTERS. GROENE BOYS 

Here’s a few tips you won’t find easily. The pinpointer uses pulse induction which causes interference on normal detectors. The pinpointer will allow you to change frequencies to tweak out interference. If you are using the Equinox 600 or 800. Set the pinpointer to the 2nd sensitivity level. With the pinpointer on lay it on the ground. Turn the Equinox on and put the coil about 2 to 3 feet from the pinpointer. Then do a noise cancel on the equinox. If you still feel like you are getting way to much interference. Change the pinpointer frequency and try again. You won’t completely get rid of the interference , you will get it to a tolerable level. The other things are when you go to pinpoint, set the detector down with the Coil away from where you are using the pinpointer. And lastly you can hit the minus button on the equinox or decrease the sensitivity on what ever detector your using, that also cuts out the interference. I have an F-Pulse that I have used for a few years. Tried the Minelab Pro Find for a while, went back to the F Pulse. Instagram.Com/DimeDetective

The F pulse is a awesome pin pointer but remember it is a Pulse unit so when you are using it in the field stick it to the ground then turn it on and it will take a moment to balance and you will get more debt out of it.

When the F pulse first came out I immediately got one as I use an F75 ltd which I love. The first one had problems within a couple of months. Fisher sent me another one, and it also only lasted a couple of months. They sent me another one, and it looks like they have the bugs worked out because this one has gone well beyond it's warranty and is still going strong. I am wondering if you had the sensitivity set on 2 ? Mine set on 3 will pick up a nickel at 4". Another good tip for this pin pointer is every so often place the tip on the ground when turning it on, this will ground balance it and give you more depth. I have 2 F pulses now. My Garrett is a 4th string backup now as I also recently purchased the Nokta Makro pulse dive which is a really good probe too.

Great job that thing looks like its really nice hope we recieve ours soon to test. thanks for sharing and keep diggin.

Well, from one John to another, I would buy that pinpointer for sure. my Garrett carrot is on its last leg. The light wants to stay on, once it finds a target it wont stop beeping. Thanks for this video. stay well and happy detecting.

I just bought one got it in yesterday it fulses too much...audio too low, very good for air test only

Looks to be a great pin pointer. It's something nice to have. Take care John. 💖

Great review and video. Looks like the carrot is slipping from the lead. The Fisher looks like the new go to and probably cost less. Plus using AA is cost effective. Don't recall if it can use rechargeable or not.

Were your batteries full and settings maxxed on the F pulse? I got one yesterday and did the same test and the depth it was hitting at was damn near double.

I really like that pin pointer. I’ll take it ! Great demonstration hope to see you soon buddy.

I do notice that it has good range, even on the Bounty Hunter review video.

Good fair review, looks like an awesome pointer. Love the fact that it uses AA vs 9 volt, that's a huge plus.

No doubt about it, Fisher as well as Teknetics make some of the best products available on the market!

Amazing pinpoter that is brother

Does the F-Pulse detect along the side of the probe....or only the tip like the TRX?

Great video!

That looks like a great pointer, John. I do wonder how much usage will come from the 2 AA batteries...will it compare to the 9 volts? Just wondering!😁💖

I really like mine. I have an F44 detector

I tried my TRX and it did all the coins right at 1 and a half inches. I'm still waiting on my pulse.

nice but not loud enough for nothing

3 beeps is highest level, read instructions.