This was a big help in the deciding factor for choosing a tail tidy unit. It looks really good on the bike because it sticks out a bit longer than most others here in America. Thanks for making such a beautiful and strong piece. I just put in my order, hopefully it gets to Texas within two weeks.
@@Nutmilk157 If I remember correctly, I waited for about 6 weeks. But they will email you as soon as it's shipped. You won't regret the wait time once you receive it.
Thanks Alex! Was a challenge as we had only just finished the room, so the lighting and sound wasn't as good as we'd like. We're improving on that though!
Best video on this.. Just one question do the oval spacers go on the out side of the brackets nexst to the indicators.. Not on the inside of the side brackets.. You put them on first so looks like outside.. Just double checking. Cheers
Dumb question... the holes on the original tail seems to have the same diameter on the bracket and on the tail. Can't you just remove the arm and re-attach the original?
Not that we are aware. We haven’t checked to see if the holes are the same, but even then you would need something to fill the gap of the OEM part left behind, and also the OEM part as you describe would not have any accomodation for the key access.
Hi there, Unfortunately until we see a 2024 model we won't be able to confirm if this product fits. Once the bike is released and arrives at our local dealer we'll be sure to be on it ASAP.
Hi, this looks great ! Will this work with usa plates? What is the min and max distance between holes ? In my state, the distance between holes is 5-7/8" (149.3mm), and the plate is 7" wide (177.8mm). Just want to be sure it fits before buying. Thx !
@@MustardBikes awesome and thanks for the fast answer. I did look up my plate size on the internet as I'm not home right now. As soon as I'm back, I'll measure it to be sure, and then order. Thank you !
Hey Wade, the owner of the bike bought some from another bike before a lot of parts were released. I'm not entirely sure but I think they may have been of the previous gen MT-09.
Seems like it would be loads easier just to buy some eBay indicators instead of going through the hassle of taking your standard ones out of that massive bulky unit you remove
Cwuzii, most ebay indicators don't even come close to the quality of the standard units. That being said we do sell a version of this product designed for aftermarket indicators if thats what you wanted to do.
