Fitting a USB Charger to my Kawasaki Versys 650 - EASY! 

Great video thank you! And camera work is spot on. Will be doing this today or tomorrow

Great Vid. Thank you. What I did to remove the factory dash plug is use Philips bit on a 1/4 drive socket with a short extension. I also did remove the windshield brackets and it gave me space to operate the ratchet . Thanks again for taking the time to produce the video. Its very helpful. Cheers from Canada. Ride safe.

I bought a $19.99 Dual USB Charger with a built in Voltmeter on eBay for my 2009 Versys 650. It's the exact same size as the dual USB Charger that you installed. The installation is the same, too.

Thank you so much for this video, that's exactly what I needed. I'll be doing the same very thing tomorrow, but I'll stalling a gear indicator as well. Good video. Thanks!

This video has been super helpful. Will be getting it done on my versys soon!

Thanks for this -- made the connections perfectly clear. Be careful with loctite on plastic -- depending on the kind of plastic it can make it brittle. Loctite makes a plastic threadlocker (452, cyanoacrylate), but for low strength and a single use, silicone caulk is a decent plastic threadlocker.

Thanks. Good video and helpful.

Thanks for this! Makes my job so much easier now :)

I just used a relay from a Honda Civic (it was a bit smaller than some "universal" 12v relays I had) that I had on hand, made four wires with male and female connectors to go from the harness to the relay, made sure the harness pointed down for rain protection, and zip tied the relay to that bracket. That way I could use what I had without having to butcher the wiring harness.

Very useful to see

Thanks 👍

Thanks man!!! Show!!!!

very good, job very cleand and profesional..

Great video, my versus is a 21 model so I assume the process will be the same for me. Actually I have heated grips on, I hope they haven't used the same connections and really that you did or I will be lost

Very good

Great video! Bike should come with these extras from factory. Wonder if grip heaters are just as easy to install?

Is there a kit from a manufacturer please. Me no like Ebay.(( I am very pleased to see that the wires are already in situ. Hope I find my 2021 Versys is the same under the fairing)) Thank you.

Good job Malc, Kelsey you are such a plonker lol

Nice job for not having mechanical abilities with the bike. Looks like you have done your homework prior to the task at hand

Very disappointed with your Daughter/Camera Operative..........Hair colour should be Kawasaki Green.......😝