Five Quick Fencing Tips 

Keep producing cobber. Never gets old unlike us all.

Another tip for you, Don't bang the staple dead verticle in the post 12 to 6 oclock. They work themselves out eventually. Instead place them in a 1 to 7oclock line with the grain , just off verticle. This way you are in a slightly offset grain set. If its verticle its like putting a wedge between the grain and spreading it making the grip weaker. the slight offset grips each point of the staple separatley . I hope I explained this well enough.

Love the measuring stick tip!

Thank you so much Tim, very useful tips.

Thanks Tim! I'm heading off to Braidwood to help Blaze Aide put up fences around 80 properties that have lost fences in the recent 2019/2020 fires. This video will help me look like I know what I'm doing!!!!

I really like this. Good, quick, sound, no nonsense advice on fencing. Keeping costs down.

I absolutely love your work. I’m a young guy getting into the ag industry and you’re a great source of information.

Great video with very good tips - Thank you.

Thanks Tim I'm so glad I found your fencing channel,it's so nice to be able to refer back to my neighbor did some work for me before he passed and left a bar that had all the measurements on it so handy.

Tim, I am New to farming and your videos make sense, and ease to understand. Thank you so much,

As someone who uses a crowbar almost every day, no more leaving it on the ground. Thanks for the tip Tim!

Great video and great advice thank you.👍🏼

Happy new year tim. Keep the videos coming they're great.

Last tip was very innovative n effective one 👍🏿 Tnx

You’re a true funny guy Tim! I thought it was just me that says burny burny when I pick up my crow bar in summer, keep up the great content

My post lifter is painted white. It stays cooler than other dark painted tools, and it is easier to find.

Another good one Tim

Nice tips Tim, for stay wires i tend to run them around first then staple but the inox is a great idea, oh and stsnding the tools in the sun is always a great tip

great tips, the wind would also keep the bar cooler too

Ha mat nice trick for the wire. Joe in FLORIDA USA.

Squrt bottle diesel on hook nails etc easy slide.couple bucks litre.goes a long way.

Some great tips Tim, thanks. A comment on your bar temp experiment though. The upright bar offered a much larger surface area to the moving air current which I think accounts for most of the temp difference. Try it again on a still day, I think the two measurements would be much closer!

I think "Fluid Film" is similar to Inox here in Canada. They sell it at Canadian Tire, eh. I want to pick some up, including a pair of fencing pliers, and I don't even own a farm. At least my tools won't rust, plants won't be hurt by the lubricant on my gardening tools, and I'll have a fun new toy to wrap wire with. Thanks for the video!

Thanks for the tip on the tool to set wire heights. We have a stick with the heights marked on it, never would have thought about nails. That will make all our future high tensile fencing easier.

Tim you should try the Texas fence fixer for Barb and plain wire! I also use WD 40 on my large drill bits when drilling through a post to hang a gate...makes the going so much easier!! Happy 2019 and keep the tips coming!

Nice mate great advice!!! Proverbsc 12:15 The way of fools seems right to them, but the wise listen to advice.

Likening your work man. Very helpful. Was wondering if you might do video on a creek stop, considerations, different approaches, etc. You seem to have a lot of great knowledge and I’m glad your willing to share

my old dad told me most of that 60 years ago , Hes 92 now and still farming

Legend

Great video mate. Another tip I’ve found helpful is turning your mains powered box off before touching the fence to fix it. Usually results in a lot less profanities 🤣. In all seriousness, running a cut out switch in line every so often can be a massive time saver when you run, kms of electric fences

i dont even own a farm or have enough room to do anything, but what you are teaching may come in handy... one of these days, i reckon. just sub'd 55.9K+1.

I can vouch for letting the weight of the bar do the work!!

Another great video Tim. I notice you use a 1200mm picket driver. What length of star pickets do you use for your sheep, and is it recommended to make the height of the fence different for cattle or is it just different types of materials that go into a fence for cattle? Thanks for your videos and your great advice.

I came here for sword fencing, but somehow you kept me interested.

Hey mate, haven't done any fencing in over 40 years but now need to help some friends (Collins Street Cockies/Pitt Street Farmers) and I find your site fabulous for relearning everything I had forgotten. Only trouble is times have definitely changed, there is a plethora of misinformation on the net and you have too many 🙂 good videos to sift through. Is there some sort of index one could sort through first? Or could you please do one video that explains from start to finish, your ideas on fencing with a brief explanation as to why you do it that way and put links to your other videos for more details? For example, some websites suggest you should strain from the bottom wires first whereas others say from top to bottom and yet again, some say bottom wire first then top down. Look forward to your reply.

my dad said. The height of the post is measured to our breast bone. wire spacings is the length of the hammer handle

Hi Tim, what are the possibilities when you want to drive a star picket into the dry dirt? Can you use water prior or is it simply a lost cause?

Can't do without inox, I used to use a can a day when doing strainer assemblies flat out. We used to use the dropper trick but 4 strands of plain locked in Fencing staples, drag it just past the post then nail the insulators, that way you know all your wires are in order and not twisted.

Gidday tim cheers for the tips. Ive got a question regarding placing in the end assembly post. Is it worth while having the posts water jetted in or simply drilling holes substantial enough? The soil is a red loam mix and the longest run will be around 170mtrs. Thanks for the viesoes mate, its given me confidence to have a go at this myself. Cheers

One tip DONT BLINK!

Now I know when I am working on my tractor that I should lay my wrenches standing up so they will be cooler.

Thank you Tom. Why no concrete when putting in the posts? Is it because concrete rots wood, concrete is expensive, concrete is hard to remove, or some other reason?

LOL in England we don't lay our handles on the ground because they get covered in rain water and shit

Fry an egg hot day. Yeah! Nasty one Tim,and,not by choice, I was fencing on that day,thanks to a rebellious little group of lambs who are pressing my buttons EVERY DAY, sneaking through neighbour's cow fence{the only section that is Not ringlock},and,working their way onto the front road,eventually finding the front gate,bleating their heads off because they cannot find their way back in!! Yesss I will now give second thoughts to just dropping the crow bar,on the ground. Let's face it, it has to be easier than bending to pick it up all the time. Ramming it into the ground is always risky. It WILL fall when you least expect it,more than likely on your hand,or,head.Leaning it against a post,or a strainer assembly is the way to go. There will be no escape today,you little rebels, I am going to make you all NAKED! It's been many years since I made a "Y" stick to stop lambs going through 5 line fence. Any clues on that,Tim? Awrabest for the coming year,and,keep the hints coming. Sometimes we need a "refresher" jolt.

Hi Tim Do you have any content on Wire Cutters

Sheep shearing competitions

Hi showbus how you use an augur?

I saw 2019, and I thought 'oh he's made a mistake, that's a year away'. Nope.. Living in the future #2019

just use a hammers length between wires far easier

I think inox is like wd40 in America.

110 degrees Fahrenheit and you are not sweating?

Anyone else come here to learn sword fighting

Wow! The soil is 67 C. That's 152 F.