Friends! Thanks for all your love and support- please check out our Windows 10 Beginners series :- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CP4DDEhukRM.html
I'm literally in tears i can't thank you enough i love you and i have subscribed and I'll like every single video of yours and comment there you're a life saver!!!!
God damn, this tutorial works perfectly, even though I struggled a bit around the "bcd" part. I've manged to completed all things the vid suggested. Couldn't believe I just fixed this by myself without bringing my laptop to laptop repair shop. Your tutorial is deeply appreciated. Thanks.
When I type "ren c:\boot\bcd bcd.old" it said the system cannot find the file specified. Any solution? My laptop working fine yesterday, but when I turn on the laptop today it always blue screen
Your Os is in D: so you do the activity in D drive. Here my Os was in C, so I move to change the directory into C: while coming to chkdsk /f / r c: , what is "c:" here? What drive i should change?
Good day sir, I have an error the same in this video, I just wanted to ask do you have a video sir that you are using USB as boot drive? Because there is no CD room in my laptop, I wanted to use USB as a boot drive which is make it complicated it with me, Or have method using USB as a boot drive, Thank you sir, hopefully you can help me in this... Thanks a lot
For those that this tutorial doesn't help. Try to analyse periphericals. My case, there were a key in the keyboard thar was always pressed and the laptop couldn't boot properly.
the system partition was not found the requested system device cannot be found......error when bootrec /fixmbr.......kindly give me solution in comnent option pls
Bro my operating system is on c: and I used the method with c: only but it's not working in second method, please help I haven't been able to fix it since 2020
When you run “bootsect /nt60 sys” command in second line your Operating System drive has to be show like “C:” or something if it’s didn’t show and you get output like this “\\?\”. Then you may consider your MBR is corrupted which required system to be gormatted. So in this situation if your data is important then connect your Hard Disk as secondary to an Desktop- Take data backup and then format your done.
I tried to do Startup Repair, that is when I got the Error Code 0xc0000098. I am stuck at that Recovery BSOD. It doesn't give me an option to go back. And EVERY time I reboot with the Windows 10 USB drive in, it goes DIRECTLY back to that same Recovery BSOD instantly. How do I get back to Install Windows/Repair Your Computer?
It's seems to be HDD issue and your system MBR is corrupted, hence please connect your HDD to another desktop machine and backup all data and after that format your HDD and lastly restore all data backup.
@@TechnicalSpark i can do all this on cmd? I dont need to turn on my old pc and do stuff with a usb? Like mount it as a folder? VOLUME 0 have been selected and thats all?
I changed the name user in the folder C:/user/(myname) via the registry editor then i shutdown when i turn on voila black screen,when i try system restore this happen "To use System Restore you must specify which Windows installation" and there was an error like the one in the video, can I fix it like in the video? What is the real cause of the problem?
Dear You can't Fix this using this method, and very big mistake you did which is performing system restore- you would have solve that using safe mode login and changing the user name back to the original. Always remember if you want to change username then that will be done using > Computer Management> Users and edit the name as per your choice.
when the black screen I went to safe mode and did a system restore but it can't as I said above, so I did a system restore via the command prompt then it happened as in the video
@@justman1031 try to change the username folder back to normal in safe mode and still if that didn’t works then you have to format machine by taking all your data backup
Hi...is it necessary to insert bootable pen drive and press repair your computer in the windows 10 setup.......because in this error i can directly go to advanced option and click on troubleshoot and then on command prompt
What do I do when I type in the letter name where my OS is on and it tells me that “The file or directory is corrupted and unreadable”. I don’t know what to do
I finally fixed the problem, but i had to have USB with windows on it pluged in. Once I unpluged USB, recovery message appeared again. How to fix that?
If your license is digitally activated then no need to activation key, it will automatically activated but if you have paper license then it would required re-activation. Contact Microsoft support first, so that you will get idea although you don’t have buy anything because you already have license.
my pc can go into the repair your computer mode and i can get command prompt from there even without windows installation usb. can i follow the steps then without bootable usb?
Brother please help, when i enter bcdedit /export c:\bcd backup, i m receiving “The Store Export Operation has failed” “The requested system device cannot be found” Kindly help i have a lot my office data in My operating system drive.
When i'm on the command "bcdedit /export c:\bcdbackup" system says "The system can't find the file" Error to export to storage. I can do something else, or i'm Just stucked there?
In whatever folder your able to find your os drive you have to enter that directory in command prompt bz your actual directory and directory found during troubleshooting may differ
I am unable to fix this problem, if i using the booted pendrive, it shows bluepage The Boot Configuration Data file doesn’t contain valid information for an operating system Unable to go to the page of language selection and repair .... What to do?
Hello How to fix this. Im in the add installation to boot list part.. and i tried all options. The Yes No and All.. but it keeps saying the system cannot find the path specified
Hi technical spark - thank you for this excellent video - I'm having the same problem as Vincent above. Checked out your Instagram but couldn't see if you'd posted the solution there - happy to send you a screenshot over Instagram if that's useful?
@@benh4390 There is no post for specific to this isssue hence i always recommend to share the error screen shot with me on chat section and based on the error code i use to help people to address this.- share your screen shot with me their because on youtube we cannot share screenshot.
I managed to fix my issue - was failing the final step because I was trying to get BCD edit to look in C when my windows partition had changed its designation to E: 🤔 thank you so much for your excellent video and taking the time to respond to my comments!
Sir, I'm using the second method. In the command prompt, after I insert the command ' cd windows\system32 ' it said 'the system cannot find the path specified'. My good sir can you help me with this?
Hello, I have a question: What if this error or similar erros of Windows appear every few days and all the time I have to re-install the Windows system? Does it mean that my hardrive or RAM is damaged? Or Viruses? Or what? Please help :(
If your getting similar or different Blue Screen error frequently then it could be because of Hardware or Software issue. 1. Update BIOS to the latest version very first. 2. First Avoid Cracked/Pirated software 3. There is highly chances or your HDD has some issue. I hope it’s help you.
SITLL WORKS! as of 20/10/2022, I was messing around with a Source Dedicated Server and probably deleted something important by accident, as of this first boot it still works, typing it from the very computer Dr. Technical Spark saved; thank you for now
Thanks for the tutorial, in my case was change the harddisk partition from GTP into MBR and change setting on rufus into mbr instalation. and it fix the problem (bios setting Legacy support enable)
