Fix Old Camera: Canon F-1 Film Counter Repair 

True indeed. Thank you for the comment.

I thank you and best regards to you from Kansas…

You are welcome and thank you for your interest in FOC.

Thank you for your comment and your long time interest in FOC.

You are welcome and thank you for your comment and interest in FOC.

Right on my friend. Keep'em going.

Good to hear this video might help. Thank you for your comments and interest in Fix Old Cameras.

Well mission completed. Removed everything and replaced everything successfully. The differences between the F1 & F1n are the way the FLM SPD/ASA dial on the camera is. You have to remove everything, shims, washers etc off the dial post before it can be replaced. Then everything is put back through the top. Bit different on the shutter button and the lock. It has a flat part on the shutter button sleeve that has to be set to leave clearance for the speed adjustment.

Excellent news! And thank you for the informative update.

Not in the near future, but thank you for the suggestion and for your interest in FOC.

Interesting observations and fun comments. If the camera is excessively grungy and looks ill cared for rather than well used a good detailing would seem to be in order. If the grudge is interfering with the operation of the camera than it would obviously need to be cleaned. If the patina of years gone by adds to the mystique of its history than leaving it as is might be a consideration. Lots of ifs... ultimately it seems a matter of personal taste and necessity of functionality. Thank you for the comments and for your interest in FOC.

Yes... hard to say when, and as in the OM-1 there are several versions. Thank you for the suggestion and your interest in FOC.

Try using a higher concentration of isopropyl alcohol. 91% should be available at a drug store. Or... www.amazon.com/shop/fixoldcameras

Hi! A bit late but I was struggling too until I realised you had to screw it off, try taking a wide flat head style pliers and turning it

@@chasekarlsen3413 Hi! At the end I used isopropyl alcohol with a concentration of 99% and that loosened the piece and I was able to unscrew it with no difficulty. Unfortunately I chipped the paint away trying to unscrew it loose before using the correct tools but it works perfectly since the fix. Its a machine built to last.

Might be the magnet release is sticking or a bad battery or corrosion on the battery lid or battery contacts ( a nearly invisible layer of corrosion will block the flow of current. The Sears KS-Super, Sears KS-Super II, Sears KSX-Super all are magnetic release and need battery power to release.

Very good to hear the video might be helpful.

I removed the three flatheads holding the counter disk on and found that it was binding on the shutter button post. The shutter button post has a small cutout to clear the disk, but the post seems to be rotated slightly such that the edge of the cutout is binding with the counter disk. I would love some help here. Thanks!

Sure enough, it was the post that needed to be rotated. Any idea on how I can get the post to remain fixed in position so this doesn't happen again?

It is possible that the alignment of the button receiver is slightly bent. Maybe you can address the area on the post that is binding with a file. The post should have a flat side that clears the counter dial .

Hi FOC, thanks for the video and I had the second issue Scott had - the shutter lock ring does not work properly so the shutter triggers regardless of if the lock is on. Any idea about how to fix that?

did you fix this? my counter is stuck on S and wont advance when pulling the lever (it does however move slightly but then flicks back to s halfway through the rotation. Thanks

Not sure of what you are referring?

Thank you for the suggestion.

No reason not... just a matter of when. Thank you for your interest in FOC.

It could be that as the 2nd curtain completes the cycle on the 1 second setting that there is not sufficient momentum to trigger the mirror release. If this is the case, a slight increase in curtain tension might correct the issue. This observation is not absolute as there are other things by themselves and in combination that could also be the culprit.

Thanh you for your suggestion, should I increase only the second one? And how do I distinguish it from the 2 screw, also, screw in is increasing the tension, isn't it? Sorry if I asked too much. I just want to make sure.

did you get this fixed? I get the same at 30s and below, obvo not an issue in everyday life but still would like to solve it before it gets worse! thanks

That would be a fun camera to feature the counter function in a FOC video.

If you are interested in possible repair - phototronic.biz/ However, if by qualified you mean a Bronica factory trained technician than do not follow the above link. The ETRS mechanical failures are generally repairable as long as no parts beyond springs are needed. The mechanism are fairly complicated and can sometimes cause repairs to be unpractical, particularly if the camera wind was forced through a jammed condition.

A couple on removal of the K1000 top cover ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y6ehEPbOiRc.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-t0KxP3A8qQo.html jammed K1000 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zOaGdKWb_f0.html

Probably still going to have to remove the counter side top cover to see what is preventing the counter dial from moving.

They are apparently no longer available. The ones featured in the FOC videos are over 40 years old of continuous service! Some substitutes are available www.amazon.com/shop/fixoldcameras Affiliate disclosure: Please make note that the links provided are affiliate links and a small commission is received by the creator of this channel if you make a purchase using these links. This adds no extra expense to your purchase. Your support of this channel is appreciated. Thank you making any purchases through the links on this channel.

A riddle that could be solved, but not by FOC. It would be interesting to know. There are some cameras that have none. And some cameras that have only a couple that serve as a detent.

Similar, but not the same. This video will show you how to remove the top cover an access the counter. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5HFpUX1NlJo.html

I have the same camera, will it still take the picture and develop perfectly though? I dont want to try and repair it as I might end up messing it up.

It was easy… they went together in the reverse of how they came apart and as a bonus the camera’s counter is now working. Although the point of the video was not about removing dust from cracks, crevices and lettering... detailing a camera is easy too. Usually the point of a wooden cleaning stick, a cotton swab and some isopropyl alcohol will do the trick. And to hear that the sin of what you call a tooling mark can not be forgiven. Oh well… the burden of such a transgression will have to be carried for eternity. Thank you for taking the time to comment and glad you found some useful information.

Great comment. That the dust bothers you on this well used camera brings a smile. Did you not also notice that the counter window that was reinstalled also was a little worse for the wear. (LOL... it had an imprint of the dial numbers from years of resting against the jammed counter dial) If so desired, detailing the dust off a camera should be instinctual to any one who might attempt this repair. If you need a demonstration of how to remove dust residue from cosmetic parts than there might be a FOC video in the Repair Basics 101 playlist. Basic Camera Repair Materials ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--Lz8sE4xDEE.html demonstrates the dipping of a cleaning swab in the cup of an alcohol dispenser at the 50 second point. The purpose of a FOC video has always been to act as guide to the quirks of a particular camera as to what might be encountered when a particular repair is attempted. The videos are by no measure intended as a complete guide and are intentionally kept as brief as possible. Thank you for your interest in Fix Old Cameras.

Perfect answer, and a perfect video in my opinion, for the exact same reason you gave. easy to follow, not too complicated but with useful insights that show huge experience. thanks for the upload, looking forward to the next video! (Planning to buy an F1 next month or so, so this video got me all excited even more.)

Thank you for your support and interest in Fix Old Cameras. Your comment is greatly appreciated. The Canon F-1 is one of the good ones of yesteryear.