Fix Old Cameras: Jammed Ikoflex Favorit 6 x 6 

As informative and helpful as ever. I've always called it a 'favor-it'.

Always able to fix my cameras, thanks to this channel.

so i just bought a canon ftb, and it came fine,beautifully stored, No Problem whatsoever, until when i took the lens off of the camera, and i accidentally pressed the stop down functioning lever(again, no lens attached) and now, the aperture completely stuck at 1.8(the problem is not from the lens) and the stop down functioning lever now when pressed, no (spring/tention to bounce back?) and when i press the shutter release, even though i set it at f16, it always stays at f1.8, i googled this problem all day and can't find an answer to this, please help me, i would really really appreciate any help, i was wondering, can i email you guys for easier help

Keep shooting more videos!

Informative and helpful as always, I really enjoy watching these, you have help fix some minor issues with my cameras. I was wondering if you have advise on a yashicaflex A2 ground glass or mirror replacement, it is very fogging and hard to see when trying to focus.

Would like if you can do a repair/replacement of MAMIYA RB67 bellows

Hello i just purchased a fujica stx-1n . I'm guessing it got damaged in the mail. When i received it the mirror was up and one of the cloth shutter curtains (right curtain from the rear perspective) was stuck. Otherwise its very clean and in good shape. Do you have any tips to get it unstuck? The stuck shutter curtain looks strait so i don't think it slipped off of the rail. I can't seem to find any repair info for this camera anywhere.

Nicely Done. I've opened up many a Yashica TLR and it's always amazing how similar they all are. Was that a "feeler gauge" you used to get under the leatherette or an old thin steel ruler? Thanks Tom

Anything (proper) Zeiss Ikon is scary to disassemble :D I wouldn't want to have to tinker with that mess under the front pannel.

Hi, Can you do a squeak repair of Nikon FA?

Nice video. Have you ever had to repair, on a Ikoflex Favorit, the upper film guide roller that is always detecting a film? so when you load a new roll of film and close the door, the film wind knob is not properly advancing the film roll until the first frame but directly jump to position 1 when usually it takes 5 complete turns before the first frame is in place.

Good repair video on a great camera! I have yet to add one of those to my collection. Say, that "Tom" person in your comments isn't a person, it's a spam bot & needs to be reported immediately. I would think YT would have deleted the account by now, but they're running a skeleton crew & letting there ever omnipotent (ignorant) AI system filter & moderate this site. If only they would get back to work & do the great job they didn't do before. Regards.

Hello, this is a bit off topic but I have a problem with a wiggling Canon FD mount. All the screws i can see are screwed in but it still sits very loose. Can you help me please or maybe do a video?

Saturate with alcohol... The camera of course... :-))) Excellent video. Thanks for the tips.

Is the gear-thingy screw counter clock wise when fastening? (The big black wheel)

What kind of adhesive do you use to reattach the leatherette? I'm about to do this exact procedure and I usually have poor results with the rubber cement I've been using on previous cameras.

I have a Canon TX, and I think my film door will not open, although my film reel is still on. Every time I lift it, though, nothing happens. What should I do?

I have a clean Favorit that has a stuck shutter. Is it complicated once I open it up?

Do you do repairs for a fee?