Fixing a little mess with a big mess

Подписаться 4,5 млн

Просмотров 3,3 млн

50% 1

Support these projects on patreon: / stuffmadehere
Check out the subreddit: tinyurl.com/smhere
Several years ago I built a CNC machine. It's been having some flood coolant system issues so I decided to cut out the heart of the coolant system and build it stronger. In this video I show how I did that.
These videos usually take a ton of work and a lot of money in tools and materials. I've made a patreon if you're interested in supporting the creation of these projects: / stuffmadehere
Tools that I use in this video + recurring favorites:
Import spot welder. Cheap bulletproof: amzn.to/2ypHmMU
Rivnuts + tool: amzn.to/3eJstWy
Digital angle gauge: amzn.to/2Vn6ZXL
Bench sheet metal brake: amzn.to/2XNfI7h
Coolant tank + pump: amzn.to/3ew1g9L
Vise brake (highly recommend): amzn.to/3akCkhZ
20 ton press brake: amzn.to/2xw4fhL
Hypertherm powermax 45xp with machine torch: amzn.to/2zfoyAv
Hypertherm fine cut consumables (great for sheet metal) amzn.to/34SjMom
Cordless angle grinder - this thing will change your life: amzn.to/3cxrDdy
Dropped off ladder 20x and still going strong: amzn.to/2wO855g
Wera allen keys 1000x better than el cheapos: amzn.to/2KlCb36
Wera allen keys (english): amzn.to/2RQUxNG
The best marker ever. Always in my pocket: amzn.to/3ewHGtL

Наука

Опубликовано:

28 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,6 тыс.

@BreakingTaps 4 года назад

"My initial reaction was to just move the plug to a non-GFCI outlet". A man of my own heart. Great stuff, looking forward to more!

@bananasstuff3344 4 года назад

What does GFCI mean?

@niter43 4 года назад

@@bananasstuff3344 ground fault circuit interrupter; a type of curcuit breaker that goes off if not all electricity/current goes through it's own ground. Mainly to save people from electrical shock (if current starts to flow through them to a different ground than outlets; so it wouldn't save you from sticking fingers into an outlet), typically present whenever there is liquids involved (i.e. bathroom).

@deus_ex_machina_ 4 года назад

@@bananasstuff3344 In addition to Niter's helpful comment, I recommend this video by Technology Connections which explains it in detail with practical demonstrations: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ILBjnZq0n8s.html

@illestofdemall13 3 года назад

@@niter43 In a normal 120 VAC circuit, the hot and neutral wires both carry an equal amount of current. A GFCI trips when it senses an imbalance of current between the hot and neutral wire. A GFCI doesn't need a ground at all to operate.

@Hosstache 3 года назад

Love his humor!!!!

@ulaB 3 года назад

I'd add another "loose" filter (with a handle or something) on top of the fixed one to get a majority of the chips out by just lifting the filter.

@Zalagar619 3 года назад

Or just use a shop vac :)

@mal2ksc 3 года назад

@@Zalagar619 Which you then have to dump. Why lift the chips twice, AND the weight of the vacuum once (or twice if you count hauling it to the mess) when you dump it out?

@Zalagar619 3 года назад

@@mal2ksc Im pretty sure he doesn't empty the vacuum every time. Just suck it up and forget about it. Then many times later, yeah you will need to dump it once. But then boom good for another month.

@Hellsong89 3 года назад

@@mal2ksc having shopvac on nearby anyways is good idea since you never know when you need to clean the machine and do maintenance. I would almost be tempted to get dedicated shopvac just for cnc specially if machining only one metal like aluminum, so chips can be then later melted and cast to make new blocks to machine.

@tonnysebang3204 3 года назад

@@Zalagar619 w smith ar phone 📱 to

@thereignofdando 3 года назад

"This video is getting a little long" - Don't you dare talk like that - make your videos as long as possible haha! They're intensely fascinating. Mind blowing.

@Trace240 3 года назад

I loved the video so much #smarter every day

@ashfaakahamed7062 3 года назад

Yep thats ryt Cause i have activated the 4G video blaster package (Srilankan dialog users know it)😁😁😁😁

@DJFreshJuice 3 года назад

It didn't even feel like a 20 minute video seriously

@ivanadriazola1991 3 года назад

tell me about it I've watched it like 3 times since it came out

@dootanator_ 3 года назад

Then the videos will be 10 hours long

@charleschristianson2730 3 года назад

Gotta love how he just glosses over the fact that he made his own CNC machine. It's no big deal....

@xCCflierx 3 года назад

Lol. Yea. Spends a whole 20 seconds mentioning how he built the thing in his apartment before he got a big shop

@opinionsmatter9771 3 года назад

A COMPACT one if that! Seriously this guy is amazing has crazy great ideas that he puts to the test! Also makes them work!

@Braunty 3 года назад

And then later glosses over the fact that he also built his own plasma cutter

@mmcfreds 3 года назад

The look that Destin (SmarterEveryDay) gave him when he casually mentioned that was really cool.

@Suckeychicken 3 года назад

of course he did... how would he make stuff there if he didnt?

@ianbelgarde9779 3 года назад

As a professional welder of 10 years specializing in sheet metal and TIG, I can honestly say this is acceptable work. You managed the heat well, added rod when and where you needed to, and you ended up with a professional looking product. Well done, and dont let hot rod showoffs with their ridiculous setups discourage you.

@ronenviz10 2 года назад

Discourage him? lol Look at his setup from his recent video. If someone gets discouraged its probably them. This guy is insane (In a very good way)

@eragonawesome 2 года назад

@@ronenviz10 got real "mad scientist but nice" vibes

@oddsketch9969 3 года назад

As an engineer who specializes in press brakes, I find your pen plotter to be an interesting short cut. Now to convince my company that it's a good idea haha.

@since1876 3 года назад

It really is a good idea, though. And not stupidly expensive to do. He has a video showing exactly how he made it.

@oddsketch9969 3 года назад

@@AndrewFrink if you're after accuracy, then there are formula to use that can get you within 0.2 mm without scrap. That said, for a quick one off, I'd use this all day, since my coworkers tend to take an already cut part and mark it with a sharpie for me to bend anyway.

@AndrewFrink 3 года назад

@@oddsketch9969 I was just looking for a finer line than the sharpie.

@oddsketch9969 3 года назад

@@AndrewFrink honestly, if your plasma cutting, what's the point? I could see it with a laser, but a plasma isnt spectacular at holding trim on the kind of thickness we use it for anyway, so a sharpie is just fine. We laser cut anything 10mm or thinner, especially if it's for a customer with GD&T requirements.

@leonardiux345 3 года назад

@@oddsketch9969 Hey, where do you work?

@justsomemincedgarlic 3 года назад

I know this guy is like in his 20’s, but i cant help thinking how he’s gonna be the BEST grandpa of all time. Just imagine all the cool shit he’s gonna make and do for his grandkids when they spend the weekend at his place.

@bloodstreak_og4012 2 года назад

Imagine being his grandkids, like "Grandpa, science fairs coming up. Mom said to come to you" *two weeks later the kid brings in a working rocket*

@Zp00ky_p0tat0z 2 года назад

@@bloodstreak_og4012 XD that’s amazing

@TLguitar Год назад

That's how a Rick starts.

@AusterEngineer 3 месяца назад

@@bloodstreak_og4012I know I’m late to this but you can make a pretty good rocket with stump remover (oxidizer) and sugar (fuel) and a body

@bustin1253 Год назад

Coming in a little late but as a welder of 11 years just the fact you welded thin guage steel with tig without blowing holes everywhere shows you have great hand control. Don't be afraid to show your welds, you're doing great.

@clerdman1 4 года назад

"A grinder and paint makes me the welder I ain't. " -AvE

@anthropomorphousdodecahedr6504 4 года назад

I always thought it's just welder folklore and AvE is a giant repository of those sayings

@SleeveBlade 4 года назад

@@anthropomorphousdodecahedr6504 there's just too many of them, I'm sure at least some of them have to be created in the moment. Either that, or he's spending every evening learning them by heart, and god knows where he finds a book of that.

@anthropomorphousdodecahedr6504 4 года назад

@@SleeveBlade he sure has his own lingo, right, and I think most of the crazy ones is his own creation. I just heard this particular one quite a few times in other places

@canadaplace2be176 4 года назад

Ground fault interupter.

@canadaplace2be176 4 года назад

And this kills covid 19?

@Makex_sweden 4 года назад

Why havent i found this channel earlier, can't wait to see more. +1 sub!

@xiasonic 4 года назад

yes, this channel really high quality. i love it

@Mrcaffinebean 4 года назад

William Arvidsson I thought the same thing and then I realized it’s a brand new channel!

@ShadeAkeley 4 года назад

@@Mrcaffinebean 120k subs in about two months, that's insane considering he was unknown before. Really like all of his videos

@franciscoroxas4075 3 года назад

6 months after starting out he's already at 1.3 mil ... he probably hacked RU-vid and gave himself a bunch of subscribers

@EdrenUa 3 года назад

@@franciscoroxas4075 he didnt hack RU-vid, he built his own small RU-vid to fit into the small apartment next to the desk.

@AlexSmith-tz2lf 2 года назад

I love how he approaches massive problems. "I was worried about holding on to the coolant tank so I didn't spill any coolant. But I already dropped the tank, so that's just one less thing to worry about." Incredible.

@paulheitkemper1559 3 года назад

The "This Old Tony" tribute vibe was not lost.

@TheNini666 2 года назад

I thought the same, a few more jokes here and there and it would be perfekt.

@N911GT2 2 года назад

I had to scroll way to far down to find this post!

@JPMotorhead1993 4 года назад

This is a channel destined to be a great edition to AvE and this old Tony

@SenselessUsername 3 года назад

He definitely took Tony's guide to filming & editing, and focusing on hands.

@Aussiefish86 3 года назад

Couldn’t agree more!

@Geeksmithing 3 года назад

*addition

@DesertFernweh 3 года назад

Only I can play this and ToT around my kids with out ending up talking to the principal about the unsual "Terms" they have been teaching to the kids at school. Having a preschooler tell their teacher "bye, bye, keep your d#!k vice" was awkward. My laughing didnt help matters.

@glennpitcairn 4 года назад

You should do a basic "intro to machining" video just a little bit about how you got into it, how you make it work in an apartment with an estimated budget and some tips for viewers that want to start with this type of home projects. Love the vids!

@ryandispecki6223 3 года назад

Gotta love how he just glosses over the fact that he made his own CNC machine. It's no big deal....

@L4sket 2 года назад

@@ryandispecki6223 Why u gotta steal the top comment like that

@danielallen2000 3 года назад

i love the pen plotter, we use something simmilar on our 4k fiber laser for certain parts by etching some bend lines. one thing that has worked well for us is to use a solid line to denote a bend in one direction and a dashed line to denote a bend the other direction, helps reduce mistakes!

@Axodus 3 года назад

Well, you still have a 50% chance of getting it right without the dashed line system.

@danielallen2000 3 года назад

@@Axodus not if you follow the rules by which you program the lines or dashes... solid is up, dashed is down. 100% accurate

@Axodus 3 года назад

@@danielallen2000 I was making a joke :P

@SMTRodent 2 года назад

That's origami 'notation', cool to see it gets used for sheet metal! Mountain folds and valley folds... Wonder which application came first or if they're independent inventions.

@sebastianjost 2 года назад

@@SMTRodent I would guess that origami used it first, but they could still be independent inventions. It's really not that hard to come up with.

@mattcroft 3 года назад

as someone who spent two years maintaining cnc mills, this video speaks to me on a deep level

@ViceChief 4 года назад

Please do more detailed videos on your sheet metal processes! Spot welding, the marker trick, and your press brake setups!!!

@StuffMadeHere 4 года назад

I've been trying to minimize that stuff because I thought it was the boring part. You're not the first to ask for more details there so I'll go deeper in future videos. Glad you like it!

@ViceChief 4 года назад

@@StuffMadeHere Boring is watching a CNC work... engineering reasoning, sheet metal in the home shop, 3DP tooling... all super interesting. Take a look at clough42 for a channel that goes pretty deep in explanations but remains really interesting.

@ViceChief 4 года назад

Also thanks for getting back to me and good luck.

@TheDigigram 4 года назад

I agree, I also watch these videos to see the finer thought processes going in!

@886014 3 года назад

@@StuffMadeHere I think it's only boring to you because you're already very good at it; a professional makes a difficult job look easy, an amateur makes an easy job look difficult. People want to empathise with content and imagine themselves doing [what you're doing]. Not everyone may have a burning desire to make an awesome robotic basketball hoop for example, but may want to make a sandblasting cabinet, an oil pan, etc and showing the processes behind the amazing projects becomes a vehicle for our more mundane efforts.

@RyoshiJi 4 года назад

I like engineers making fun of "Business logic."

@mathew66 3 года назад

What is business logic?

@HaloWolf102 3 года назад

@@mathew66 You lose money to gain money.

@chickenmonger123 3 года назад

Well business logic is inherently illogical when viewed outside of its subject matter. Because its subject matter is dealing with people. And when fat rats aren’t bogarting decision making, it’s usually pretty damn effective at dealing with people.

@cate01a 3 года назад

13:44

@dumbass3843 3 года назад

@@mathew66 lose something but gain flexibility Thats the jist of it i think

@Guffy1990 3 года назад

This is so unbelievably over-engineered and significantly more complicated than it needed to be... I love it.

@No-pm4ss 3 года назад

SovietandScotsman Was it really? CNC machines are inherently complicated, this man built a homemade one :P

@Guffy1990 3 года назад

@@No-pm4ss Could've just done 2 pairs of triangles and connected everything together with a circle so the pump was at the lowest point, and then put a domed mesh over it so it would stop the chips from getting in while allowing the coolant to go up and over any clogs that may happen. Wouldn't have taken much work, but I assume there was some reason why it was done like this, but I'm not sure why...

@azure3526 3 года назад

@@Guffy1990 He was worried about leakage, im afraid the man has no welding skill and two triangles welded together at their sides is significantly more prone to leakage as the weld breaks down to wear and tear than a sheet of metal just bent. That and he wanted to move his motor out of the way of the coolant not have the coolant just flow over it

@nermalsturf 3 года назад

I just love his calm, cool, humble dry humor. His soothing voice helps too.

@lfg_ling2833 4 года назад

2:04 scare the living crap out of me

@LuisGarcia27 3 года назад

Me too hahaha

@resq3496 3 года назад

same

@TBJK07Jeep 3 года назад

Nice choice of the Wilhelm scream

@lippen777 3 года назад

I need new underwear after that 😂

@foxxtrot6909 3 года назад

My heart skipped lol

@shadeofsound23 4 года назад

The whole "Business Logic" line was great, and then made better by the little bit of coolant still left over.

@tylerkrug7719 3 года назад

It doesn't matter how well, you weld, there will always be some "professional" welder, who could've done a better job blind folded. What ever works, works

@Eric-gd3ec 3 года назад

Anybody else jump when he made the electrical shock noise? Great video!

@justinhetricck6197 4 года назад

That looks a lot like a oil pan for a car. A few adjustments and you can start making custom oil pans for cars. Love your channel. Just a observation from a car guy.

@nolzy2359 3 года назад

I thought the same thing

@markfryer9880 3 года назад

Question from a non car guy: Why do you end up needing custom oil pans? Is that a different name for a oil sump?

@nolzy2359 3 года назад

If you swap a different engine into a car you may need to change the oil pan to fit. Just one application

@lemster101 3 года назад

@@markfryer9880 As Koby said, could be a fitment issue. Could be the have a bigger oil capacity, better flow or just replacing an existing broken one.

@seth_stewart 3 года назад

@@markfryer9880 Or if you're having to replace one on a very rare engine where there aren't many parts available. He did an excellent job fabricating that pan, by the way

@giantneuralnetwork 3 года назад

“This is definitely one of the best tub experiences I’ve had”.... have you tried scented candles and epsom salt?

@kusaisama 2 года назад

I have nice shampoo.

@Irfanhill 3 года назад

I can't even drill a hole properly in my wall to put some shelves (and I'm not really willing to learn to do better, rather ask for help or pay someone to do work for me), but I love watching your videos. You are so calm, explain things pretty clearly and make them interesting. Great content!

@Fr0s1Byte 2 года назад

Watching you explain each step through your process is so valuable. Seeing you casually fix and upgrade stuff around your shop is so inspiring and really helps consolidate stuff. Cant thank you enough!

@grayduster 4 года назад

One thing you could also do to guard against really fine chips is perhaps to install a dam into your coolant tank, with the drain falling into one side of the coolant tank, the dam (vertical divider) stopping the fine chips from flowing towards the pump, and the coolant overflowing the top of the dam into the pump side. Hopefully never needed!

@777donutboy 3 года назад

Chips still fly everywhere tho

@Alaskaalien 3 года назад

after it falls down into the box have a vertical wall like so -----------------------\ \ | so the coolant flows over here \-----------| and metal collects here

@eric.is.online 3 года назад

@@Alaskaalien ASCII diagram skills on point there, nice one :D

@skoalsoldier 3 года назад

“If it wants to flow sideways it has to go back up a vertical wall, which it can’t do”. Buddy it’s 2020. Prepare yourself.

@seth_stewart 3 года назад

Breaking News: Gravity is not immune from COVID

@seedmole 3 года назад

Surface Tension be like "yall mind if I hit that?"

@csn583 3 года назад

Ever watched the plume of a rocket launch wrap up ahead of the engines as the atmosphere thins out? Like electricity, most of a fluid takes the easiest path, but some of it goes every way it possibly can (as dictated by pressure gradients). Working in aero/thermal, it took me a minute to accept that with a rear-angled defroster jet hitting a highly raked windshield, some of the defrost air actually turns around and goes forward, down the windshield. But it do.

@emperorSbraz 3 года назад

RNGesus rip

@8fledermaus8 3 года назад

Not anymore.

@degujm01 3 года назад

Me: proud of showing off a wooden box with janky corners that I try to pass as a cabinet to my friends. What did you do? Shane: I just made a CNC, no biggie... Me: ohhh.... A shop tour video would be awesome.

@gupiwa 2 года назад

He didn't make a "Computer Numerical Control", he built a metal box with legs to hold the mill that he bought. He does plenty of impressive stuff, no need to attribute store bought stuff to him as well.

@braxtonh2229 2 года назад

One is out now

@aronsztojka6034 2 года назад

Building a CNC router or even mill is surely a big project, but it's not a complicated or creative one. You get lots of busywork and research to do, but it's all been done before and described step by step numerous times.

@Sarcastitonea 2 года назад

@@gupiwa I was thinking about this, yeah, it looks impressive to anybody who either doesn't know what a CNC is or hasn't built many things in their life. A CNC really is just a mill that moves and sprays coolant

@TacoStanMan 2 года назад

I think what's most amazing about this channel is how he doesn't shy away from showing how even someone at his god-tier level makes mistake after mistake, to the point at which it's surprising when things work correctly. In reality, this is how even the best of the best traverse a project, and I wish more channels would show that part of the process more. It can be extremely discouraging to those trying to get into any of the 8 billion specialties he's somehow mastered when they feel like they are always messing up... when that's part of the game. If you are creating something that has never been done before - or something that has been done before but in a different way - you ARE going to make mistakes, and probably a lot of them. And that is if you have just ONE specialty, much less applying a large number of them as many engineers/hobbyists do.

@pterodox123 3 года назад

Don't know if you know or if it matters, but at 17:28 you can see a motor shifting around a bit in the top left corner. That may mess with tolerances or just wear something out prematurely. Like, so he can see.

@petersailer 4 года назад

When you do the rivnuts up, start with the drawbar wound out more so that the arms are more closed. You'll have a much easier time.

@rickseiden1 3 года назад

When you took out the last bolt and the tub dropped all over, I was reminded of a time where I removed bolts without thinking about it and faced the consequences. I was fixing the garage door, which had a snapped cable on one side and was slanted at about a 5 degree angle, jamming it. I proceeded to take the nuts out of the plate holding the cable to the side still attached to the spring. When that last bolt came out, the plate flew up right into my face. It hit the right lens of my glasses, throwing it into the bridge of my nose, leaving a small bruise on the bridge of my noise. It then slid over my brow leaving a gash that cost me three or four stiches. If I weren't wearing glasses, I most likely would have lost an eye. I leave the garage door repairs to the pros now.

@User7039 10 месяцев назад

It's crazy how many tools you work with. Your projects are all over the place. Really entertaining.

@gigafinger666 4 года назад

8:32 this is one of the best tub experiences you've ever had? Maybe try a bigger tub? And bring a friend :D Loving the videos!

@makeit2132 3 года назад

Now we know what we were doing while his was learning all this stuff. No regrets!

@felixfromnebraska8648 3 года назад

I really love your project tenacity, Shane. You always include these setbacks in your videos, and I appreciate that. I took some programming back in the early '70s; I never made that my career field and always wondered why. Anyway, I digress. Thanks for always including the mistakes that are made in your videos. It gives us a better idea of the processes that you go through to create your project. You always give a glimpse into your systematic brain. I sure wish I was better at math and science. Thanks for sharing. Felix

@Ilovehaleebear 2 года назад

I would watch any length of video made by you. Your work is fascinating and I rarely enjoy youtube as much as I do when im in the middle of one of your projects. Take your time, enjoy your craft, your audience is here and ready for whatever you have time to create!

@8jacob18 3 года назад

Wish you had more videos, just so satisfying to watch for someone who took drafting at a trade school! Really brings back some good memories!

@Mountain-Man-3000 3 года назад

"They aren't the prettiest welds... but they're there.". My thoughts exactly.

@Bigman74066 3 года назад

I really like that you point out where things went wrong before being successful, it's educational and makes me feel better about myself (other people make mistakes too :-) )

@redstonepotato9756 2 года назад

I’ve seen this video 3 times and this is my forth. I love how perfected this machine design is for all circumstances. A lot of people would beg to be able to get one of these

@TheWhatman21 3 года назад

" cutting through 16 gauge steel is hard" As an industrial welder I laugh at this statement ha

@saltstillwaters7506 3 года назад

Edi wow

@SH-pc4xt 4 года назад

Very nice video, thanks for sharing! You did an excellent job explaining and showing everything. I also appreciated your perspectives on spot welding. I've looked at spot welders (at Harbor Fright, of course), but never really thought about what they can do. You've illustrated their utility in sheet metal construction in a way that I won't soon (ever?) forget! Very impressed with you skills and analytical thinking too.

@wencesbesada 4 года назад

Plasma cutting + bending + spotwelding makes your work look Pro as Frig! Pretty nice!

@TreyCamp 3 года назад

Great job! I love how you take time to improve your tools and figure out all the little details! it's what makes things worth talking about.

@garretlizotte6288 3 года назад

Watching this one again for entertainment! I must congratulate you for the leaps and bound you have made in video quality in just 10 months after this video was uploaded!

@Bbeaucha88 3 года назад

Watching an iterative process might be my favorite thing to watch on RU-vid.

@CodeF53 3 года назад

I really enjoy both your new and old content. I would love see some more stuff like this in the future

@davidhicks8290 3 года назад

You should do a video explaining your favorite tools and how to build some of them.

@jonflannery8984 3 года назад

I love the business logic win. I’ll certainly be trying to adopt that mindset somewhat for those future potential “wins”. Thanks man. Always find myself gravitating towards a few specific channels these days to gain inspiration to get out in my own fledgling maker space.

@reifrei1170 3 года назад

"This is definitely one of the best tub experiences I've ever had"

@A1rPun 3 года назад

8:30 :)

@estherlucas3658 3 года назад

"A grinder and paint makes me the welder I ain't. " -AvE

@since1876 3 года назад

"I'd rather be undersized than oversized" first time a man has ever said this.

@greenherooftheinterwebz7078 3 года назад

hey, I personally would like to be able to comfortably fit, as apposed to being uncomfortably fit / not fit at all.

@irok1 3 года назад

Nah, too oversized just hurts

@irok1 3 года назад

@Peter Evans average implies there are higher and lower values, so statistically there is more than a "no way" for me to know that

@irok1 3 года назад

@Peter Evans Suppose that's why we need the median instead of the mean, but you certainly seem to know about below average as well

@irok1 3 года назад

@Peter Evans I may kindly suggest some rereading of my first response, as average is the first reply, as is your reply to my own. But I suppose maybe English would "are have" to be lost on those who speak likewise -Lol, all fun-

@imaxinsertnounherex 3 года назад

I spent a summer at college operating a machine that made Rivnuts. I was super excited to see someone actually use some.

@jarenhudson9794 3 года назад

Anybody going to point out this man has posted 8 videos and wrecked a 1.5 MILLION sub count? Bro! You're videos are nuts! More please.

@niccage321 4 года назад

I'd love to see a video on your first CNC, the one from your apartment

@travisallen74 4 года назад

I'd like to know more about it as well

@danielstewart3507 4 года назад

Me too. It looks really interesting.

@Phil60084 4 года назад

Looks like it's the same but without the enclosure which is why he built the enclosure

@endrun0615 3 года назад

I agree, something like this, would be perfect. Was it a complete order or did you work out a parts list.

@berlinetta350 3 года назад

This was a video about that CNC.....

@jcdelrio100 3 года назад

This is my 10th video in 2 days, its pure engineering porn. Thank you for all you do, you remind me why I became an engineer in the first place. If I don't go back to engineering one day, this is something to aspire to.

@bobrewer202 2 года назад

This is my 1st video of yours. Love how you get to the point without telling us about the weather or how your cat is doing! You also explain well for those of us who do not have your incredible sill level. I am now a new subscriber!

@BugsydorPrime 2 года назад

Loved the "This Old Tony" pastiche. The improvement to the cooling system was pretty neat, too.

@3pbhenry 2 года назад

What would be cool is having an auxiliary hose, or a quick disconnect on the sprayer, to allow you to periodically rinse and flush chips from the enclosure and components of the machine.

@furhadnasserjah123 3 года назад

Man you’re something special, so crazy smart! You’re videos are always so amazing to watch and it inspires me to keep building stuff to one day be even half as smart as you man! Keep it up!!

@Dragonborn__ 3 года назад

Rivnuts truly are a great invention. I can't count how many times I've used them in projects. Great video as always!

@TheErick1116 2 года назад

Never been jealous of a man for his brain and the way of works, god damn man it’s like watching a version of myself on 4 lvls higher I do this shit but with desks and doors and shit around my house crazy how smart you are

@The.Talent 3 года назад

Haha. A “protective fez”. “I wear a fez. Fezzes are cool now.” -The doctor.

@georgedennison3338 3 года назад

@The Talent And the last time there WAS a cool doctor, he wore a fez, IMHO.

@The.Talent 3 года назад

George Dennison - agreed. I haven’t been able to stay interested in it since.

@georgedennison3338 3 года назад

The Talent Same here. Tried to hang with the old f&@k, but couldn't, (I'm an old f&@k, myself, so I'm not being agist, just descriptive. LOL), Then watched a portion of one show. The doctor has to be a bit crazy, and neither of them have that 'spark', the character needs. For me to not watch/read Sci Fi, it has to really bite, caused I do like me some SciFi. Have for a long, long time.

@calebkennedy771 3 года назад

"the fit is nice and tight" The piece of metal: "Thanks G"

@logic0905 3 года назад

Cool upgrade. You can add a coarse stiff mesh over the fine mesh to protect it from mechanical damage. A gap of 15-20 mm would be sufficient between the two. It can be held in place with magnets to make it easier to access for cleaning and revision.

@Greenmachine305 3 года назад

Your channel makes me remember all the manufacturing processes and techniques I have long forgotten.

@OvidiuMarin 4 года назад

Wierd how the RU-vid algorithm haven't recommended me this channel earlier. You just got a new subscriber, congratulations! Keep it up !

@ihatejoze 3 года назад

When tig welding, remember to get comfy and bring the tungsten to you.

@Vodnik110 3 года назад

That machine, is a work of art. We need more people like you.

@michahalczuk9071 3 года назад

As for spills and similar, I highly recommend vacuum washer or what we call in Poland washing vacuum. You can use it both for carpets and floors for washing and for cleaning any leaks. New one cost me less then 100$ but it was really with it.

@barlevi1 4 года назад

Amazing content dude, you are my new This Old Tony... you are This Young Tony!

@GRT1005 3 года назад

Loving the obvious sarcasm 😂😂 "The changes are very subtle but noticeable if you look".

@christopherkarlsson4919 3 года назад

The shadenfreude on that coolant spill is something else. Your videos are great, I wish I was as cool as you and my weekend is awesome cause I've only just started watching your videos so theres more for me to enjoy. Thumbs up dude.

@H3xx99 3 года назад

Jackstands are incredibly useful for holding up tanks that you're trying to separate from structures that are too large for you to reach around.

@rusty911s2 Год назад

Hey, thanks for the tip with the digital angle gauge. I have a nice old folder but with no gauge so I either fiddle with templates or employ guessology (which I'm not very good at). Great work: very inspiring! Anyway, gauge ordered, so thanks again.

@lucaskaiser8995 4 года назад

Great quality content, can't wait for more !

@peterpanda5167 3 года назад

I can’t get enough of your videos, thank you! Please keep posting!

@jefftsalote9213 2 года назад

Love the spot welder! That's a cool and very handy thing to have.

@7mo2ash 4 года назад

Great content, keep it up! Btw, how about a drain spout on that tank? It'll make future spills smaller.

@nobodynowhere8061 3 года назад

Coolant: *Spills* SMH: “I see this as an absolute win!”

@serairesana6600 3 года назад

I'd add another "loose" filter (with a handle or something) on top of the fixed one to get a majority of the chips out by just lifting the filter.

@orans_ 2 года назад

@@serairesana6600 this is stolen from @Balu

@tomrvn666 3 года назад

i could watch you work for hours and i honestly can say i have. your channel is amazing, i love the content, keep it coming.

@hexsapeddy8616 3 года назад

I am in love with your videos, watching them all, and I’m sad I’m almost done! I Can’t wait to see more. every video so creative and smart, amazing

@ruuman 4 года назад

Thats a nice little setup, great videos mate, really enjoying your content!

@StuffMadeHere 4 года назад

Thanks for the feedback. I do so many projects and no one sees them so its fun to share!

@Gnordlan 3 года назад

I like the meta layering: "I'm using my ridiculous home machine shop to build a better ridiculous home machine shop". I'm not jealous, I swear.

@durbinhaas 3 года назад

I'm in the process of building my own mill after watching your videos, thanks for the inspiration!

@tylerkrug7719 3 года назад

I think the metal bender is great! It got the job done just well.

@scottdougla5 3 года назад

Hi, great videos! I've watched them all. Keen to see more. I'm curious to know what you studied and what you do for work? I'd love to be able to do what you do!

@Sarphendon 3 года назад

a quick release system for the filter would be handy for clearing chips

@colto2312 3 года назад

lunchbox latches come to mind

@murk3d697 2 года назад

Love your optimism and dry humor

@mr.anonomousanynonomous455 3 года назад

THANK YOU FOR TELLING ME ABOUT THEESE RIVNUTS I AM BUING SOME RIGHT NOW

@AnonyMous-lk7zi 3 года назад

Moral of everything on this channel: do it right the first time and you won't have to redo work.

@eltigre6446 4 года назад

This new tony

@tillmannkloeckner77 3 года назад

The talking hands! :-) Great allusion!

@petebrooks1223 3 года назад

The POV is a great way to follow your work. Inspiring creativity! Cheers!

@SgtBurned 3 года назад

We had a Horizontal Bandsaw that had a 3 phase motor pump for coolant. All the time chips were floating down into the tank and shorting the motor. Many days of troubleshooting and I wish we just made a reservoir like this!

@crakotaku 4 года назад

Great video! I don't know if you have seen it, but the series on building prototypes from the master Dan Gelbart. (youtube is filtering comments that have links so if you are interested look for "Building Prototypes Dan Gelbart part 5 of 18 Spot Welding") Regards.

@nicklaskowalski 3 года назад

“One of the best tub experiences I’ve ever had...” 😂

@chrismanning5232 3 года назад

Your channel is insane, man. You set the bar so high for other content creators.

@nicholasrose2769 3 года назад

You are the most understated yet monumental genius ever to walk this earth!!! I can’t wait to see what else you make. And I love how you describe building a **custom-made** drain tub for your **custom-made** CNC machine with the same nonchalance I would bring to bear if I made a video on how to tie shoelaces How do you do that?!?!?!? 🤪