Fixing an outdoor faucet that has low water pressure or leaks 

Would have been nice to show how long it took to fill a pail with water in the beginning . Then after the fix ,how long it took to fill same pail. THANK YOU.

Faucet came apart with ease...I think the entire pipe needs to be replaced

Good video. Turn that wrench over so the torque is on the fixed jaw. Just some friendly advise.

Thx for posting. We normally have a shut off valve inside the house for each hose bib.

Exactly my problem, thanks!

Good stuff! Heading to HD and try this now!!

Think someone forgot to turn the water off!

I replaced my PRV and the bibs and my water pressure is lkke 25 psi

Thank you for this!

I've got low pressure i got a boiler I've changed my tap no luck what can I do

Good information. Thanks.

Please support the channel by subscribing!

Thank you this really helped

You don’t lubricate rubber washers with “water.” Use clear silicone plumbers grease. The washers will last and its actually rated for “potable” water.

I have the exact one, but my issue is that the knob won't turn at all. It dsnt budge!! The one on the other side of the house works fine, but we can't get the knob to budge on the other side. Any advice?

Can only outside spigots have a loss of water pressure while inside still has good water pressure?

Congrats on your fix being effective. That was quite a substantial amount of residual water when you were releasing the pressure at the beginning.

you are fine other ppl are better., with better tools...

Why can't you just shut the water off on that line?? Why you gotta shut the water off to the whole house?