Thanks again, Matt, for covering all the little things that make the Haslab pack worth it! Also, a tutorial on how to change out the stock split loom with a real one would be great! I plan on converting my Haslab pack to an 84', so that would be a big help.
I think the problem results from being placed in the stand with the Alice pack connected. I think it is delicate in the connection and should be displayed on the wall. The hose doesn’t fit in the stand groove. Which causes the problem.
I wasn’t having issues with the hose. With mine I’ve noticed there are 4 gold connectors on the rim on the cyclotron cover and the pack it’s self and when the bumper is fully tightened the cover is still slightly loose and not completely flushed with the pack, causing the power to lose connectivity. It’s easy fixed with a washer but still feel like that shouldn’t be an issue with a $400 product unless they just forgot to put a washer on mine. With a washer, it seems to have fixed the issue so whoever reads this, hopefully you’re able to get your issue resolved.
I do the aluminum foil trick because my issues is the pins are not contacting fully. No issues now. Seems silly but I can expect a $400 Proton Pack toy to be perfect. Honestly will not have pack displayed all the time with wand so this little fix is fine for me.
My pack turns off when I turn on the activate button or press the intensity button. I have unplugged both ends of the hose to make sure the connection is on tight. No luck. I’m getting frustrated and have not heard back from hasbro. Has anyone found any other solutions?
I have this weird issue. When I Fire up the wand, on the 3rd switch it powers down the pack. 😞 Been trying to find a solution for this. Help me GB enthusiast you are my only hope
That’s the first I’ve heard of this one. Have you tightened your loom connections on each end and made sure the cyclotron lid is snug against the shell?
@The Proton Pack Is Not A Toy I did tighten both ends. I haven't use the electric tape trick though. Will try that tonight. Also I read on Facebook someone had this same issue as me. Apparently he too aluminium or tin foil and roll it into a ball and stuff the connector holes on the wand side and pack side. And some are also saying it could be a battery issue. Some are saying I need to pick up Duracell batts. Will try that as well. Hopefully it's all good
@@Dented_Battle_Armor I know i might be late! But for me it was the battery issue, i just change the battery's on my proton pack and that seems to fix the problem
