Fixing Ek civic door panel proper repair. Reinforcing with fiberglass 

If they just starting to crack and they aren't completely gone yet I'd scuff the back side with 80grit sand paper and lay down a few layers of fiberglass and resin. Once it's cured over night it'll be extremely tough and hold up to years of abuse.

@@the710experiment84 Thanks I’ll give it a shot.

I used 2 inch wide blue painters tape to keep the resin from bleeding into the fabric since I didn't have the missing pieces of the panel.

@@the710experiment84 I do have the missing pieces of mine…any suggestions as to how to hold them in place before putting the fiberglass down? Superglue is what I’m thinking but I’m worried about it seeping through to the fabric. I haven’t thought of it much because I’m kicking the can down the road but any suggestions would extremely helpful. Thanks in advance!

@@nomtimes3 I used the tape to hold the pieces together, and to keep the resin from coming through the fabric.

@@the710experiment84 Thanks for the response and it makes sense. I’ll let you know the results when I finally do it. Lots of procrastination due to the fear of screwing it up but it will eventually be done…one day.

@@nomtimes3 I totally understand that! Sometimes it helps to do some testing before you take on doing a full door panel.