Fixing Head Rattle | ECD Tips & Tricks 

Leave some other tips & tricks you want us to cover ⬇️

Tip for getting heads off that are stuck with tape. Use a heat gun or run it under a hot faucet to heat up the adhesive. Works like a charm. Also, put the stick between your thighs and pull will always be the best method for pulling the head off.

the intro made it seem like a arts and craft video from preschool but this is helpful

Shooting string method is 👑

I use a piece of thin semi-rigid clear plastic (polyethylene - the same material that you would find a pint of strawberries packaged in clamshell containers... also available for every vacuum sealed product out there). Wrap a rectangular piece completely around the shaft (about 1.5" x 3"), mark the overlap with a sharpie and trim it to meet the proper circumference. Slide the head on with the shim in place them use the sharpie again to mark the plastic at the bottom of the head. Take the head off and trim the plastic a final time for the bottom border. This works like a charm and avoids all the issues of the head getting stuck because of tape adhesive when using tape as the shim. I've done this a half dozen times over the years for the various shafts my son has worked through. Super happy with this method. One word of caution - cut the shim short enough to ensure there is no lip sticking out from bottom of head. Thin stiff plastic like that can be sharp. Good luck.

Great tips, played hs 00-05 and my son is playing now. Never thought of the shooters, we always just used hockey tape

My personal hell is a cold rainy practice with a loose head and every ball is old and slick.

needed this when I was in middle school

the handle of q tips also work as spacers and if you're getting a shaft second hand and the screw hole is too big, find yourself a wine cork, put it in the shaft, screw into that.

Great tip Thanks. I use Flex Glue on the screw to keep it tight. That particular glue holds well but stays pliable enough to still remove the screw if you're switching heads.

Nice quick solutions - also professional-looking video. Keep up the good work.

Love the intro

I need a tip for how do college lacrosse players air out their gear so it doesn’t get moldy if they live in the dorms?

Change that intro music lmao, I use the electrical tape to stop the rattle. One of my favorite tips is for but ends. You tape a normal rubber end cap with electrical tape so you can't pull it off than make a donut. The end caps reinforces the donut. And you just put on tape normally

You can use a cork from a wine bottle as a plug for the screw to bite into.

That shirt is so fire. I think a video on how to do a multi color dye like a sherbet dye.

STX has an insert you can use

Boy just had to get my weapon x head on my MTX Shaft and it wasn’t as hard as I thought it was gonna be at first, I bought without Realizing they aren’t compatable but I made them work and it’s great but this a cool technique!

I use a sharpie in the helmet chin straps to make it even

Fixing a loose hole on a Carbon fiber shaft

I love that you used a under armor head. They rattle with literally everything shaft :/

dang i want that head, i have the US flag cf5 shaft, and that head dye would kill

lol, my maverick head rattles on my maverick shaft. i really need add that second screw. looks like a #6 x 1 inch self drilling screw

A good tip to cover. I’m going to need to buy a new head soon, and there’s no way to find a natural colored dna. Do I buy a regular white dna or is something new coming out within the year?

Would this work with the OG duel?

Own the rattle, if it gets bad enough it might give you a little extra whip

How do you fix head rattle for a head with a throat plug?

I need a tip on how to remove a throat plug from a head. ie an Evo 5.

Eh just jam tape on there and pray

First

mitchell pehlke the kinda guy to dislike this vid

Fix the SMELL in my sons’ pads and gloves. 🤢

i put a coin in mine…