Fixing my trashed budget mountain bike.

Подписаться 152 тыс.

Просмотров 154 тыс.

50% 1

I never got to finish this bike, so it's time to see what over $5000 in upgrades can do.
Polygon Siskiu D7 $300 off! - bikesonline-usa.sjv.io/b3Bv3k
Visit bit.ly/USACmember and use my code "EVANSMTBSAGA" for $19 off a RIDE or RACE+ annual membership for $25,000 on-the-bike injury coverage!
Affiliate Links:
Fox 34 Grip2 - www.worldwidecyclery.com/prod...
Fox 34 Gold Stickers - amzn.to/3ccVWLs
Yeti SB115 - www.worldwidecyclery.com/prod...
Bike Hot Wax Kit - amzn.to/3yBIVmp
Jagwire Elite 2x Cable Kit - amzn.to/3O6NJpt
OneUp Carbon Bars - amzn.to/3QYlPPe
Oneup Stickers - amzn.to/3I0wi8R
Deity Copperhead Stem - bit.ly/3a2eVYH
Tools:
Torque Wrench - amzn.to/3KzmMuv
Bike Hot Wax Kit - amzn.to/3yBIVmp
Tubing and Pipe Reamer - amzn.to/3Px0f2h
Headset Cup Removal Tool - amzn.to/3ugK0On
Headset Cup Press - amzn.to/3qlQWbX
Feedback Bike Stand - amzn.to/3NZtuLP
Shock Pump - amzn.to/3uuUGdA
5" Bench Vice - amzn.to/3EbTW0c
Soft Vise Jaws - amzn.to/3KFRvpa
AC Delco Brushless Electric Ratchet - amzn.to/3xlaqSg
If you'd like to support the channel, consider becoming a channel member for sneak previews and exclusive access.
Music by Karl Casey @ White Bat Audio
For business inquiries: evan@honestinfluence.io
If you'd like to send me something for a future video idea:
Evan's MTB Saga PO Box 6498 Goodyear, AZ 85338

Спорт

Опубликовано:

27 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 373

@noodle_the_snake4359 Год назад

This dude has so much money to spend (not to hate your earned it)

@EvansMTBSaga Год назад

Luckily this video was just moving parts around so it cost $0

@mtbboy1993 Год назад

@@Wheelsanstuff Depends what you do, I won't go into details😁

@lorenzo8238 Год назад

I just wish you could where a proper mtb jersey like a fox one or something

@jinavl Год назад

@@EvansMTBSaga b4 you move you should come out here to Asheville nc and check out the riding we got here..moved here 5yrs ago and its been the best decision

@benphillips1149 Год назад

@@mtbboy1993 my crack den has a great profit margin!

@Mr.P.Griffith Год назад

I had to cut with a grinder, an inch or two off the seat tube on my marlin because of the same issue. I cut it down to where there was just enough room for the clamp to sit comfortably down against that welded support piece between the seat tube and the top tube. It instantly felt better. It was so high that my fully extended 150mm dropper didn't fit between me @6ft and the bike. Never had a problem after the mod.

@roamingfaber4302 Год назад

My fav bike channel on yt love the mix of mechanics and riding and great analysis and opinions

@Jer0da0sniper Год назад

I’ve said it once and I’ll say it again, you can’t expect All Mountain/ Enduro like performance out of down-country bike. It’s made for XC, fast and efficient. You mentioned the Yeti feels really good on the tech climbs, because this is what the bike is designed for. It’s not designed to bomb down rough DH trails like a toboggan. Since it seems like you enjoy descending the most, buy a long, slack frame with at least 140 rear /150 front, if not more travel. At that point you’d feel better descending even without the crazy high end parts. I understand you do this stuff for entertainment and as a business, but you have to understand what a bike is designed for, and that no amount of fancy high end parts is going to change that drastically.

@EvansMTBSaga Год назад

I'm okay with sacrificing the descent, but I want a bike to climb well, and jump well. That's all that matters to me and my riding. I found that 120 is a great amount of travel for hitting man made jumps, but I could be wrong! I'm researching a 140/150 though! Thanks!

@tracymcmanus550 Год назад

@@EvansMTBSaga if you are moving to the Bentonville area a trail bike to consider is the YT Izzo. Out of all of his bikes, this is Rich Drew’s favorite. This bike climbs great, and has a great long ride feel. It is not a race bike like the Yeti, so you will get more comfort out of it while having a playful and nimble bike. There are many others like it in its category. It may be the all around bike you are looking for

@DirtyWabbit Год назад

Yt izzo, spur or a properly built sb115.

@ThisGuyRides Год назад

@@EvansMTBSaga Have you tried DW Link bike Ibis Ripley? That sounds like your ideal bike.

@MrSupermugen Год назад

@@ThisGuyRides but... then your stuck with an IBIS lol.

@YourAverageJoe1000 Год назад

Love your channel! I agree on the seat stay problem with the D7. I've wondered if getting shorter cranks would help, but it seems like the smallest common size is 165mm, and the bike already comes with 170mm (less than 1/4 inch difference). Initially I wondered about cutting down the seat stay a bit, but even that doesn't have much room to decrease before hitting either the triangular reinforcement, or bottoming out the dropper post (unless a smaller one is used). I'm hoping for the future, they find a way to reposition the reinforcement, so that a shorter seat tube and dropper can be used.

@EvansMTBSaga Год назад

5dev makes cranks 135mm 😂 they probably have to keep it that long to prevent cracking, hopefully they do tests on all that

@𝘿𝙖𝙧𝙩𝙝𝙑𝙖𝙙𝙚𝙧3DS Год назад

You have become on of those youtubers who makes me really happy and and actually excited to watch the content when they upload👍

@taiwna5 Год назад

Love to see your videos getting more and more entertaining. Keep it up my dude

@330_Crew Год назад

The sense of "compliance" on the Yeti is likely from the high frequency vibration dampening from the carbon frame.

@coreybeck7148 Год назад

Good luck with the move dude! Looking forward to more new content!

@RadioReprised Год назад

I have 1200 miles in very similar terrain on my Medium/27.5's and I LOVE THIS BIKE! Other than riser stem, grips and seat it is stock and more than the sum of it's parts for $1800 delivered! My Trek 930 XC from 96 is sad and lonely now!

@thelosian Год назад

How tall are you?

@RadioReprised Год назад

@@thelosian Little over 5'7''....got 2300 miles now!

@cglasford1 Год назад

this was a cool video, I just bought my wife the D7 and its cool to see what are some useful upgrades. The D7 seems very capable straight out of the box.

@ARandomATube Год назад

Love the Siskiu content man. The D7 is a great entry dual sus and I love mine. Glad to hear you reaffirm my thoughts 😅

@bikesonline Год назад

Another great video Evan! Stoked to hear you love the geometry on the D7 so much. The build looks awesome 😍

@hambo76 Год назад

Hopefully the next D series lowers the seat tube height and slackens out a bit more, something similar to the Transition Spur. Then make a D8 model with SLX and Fox 34 or Rockshox Pike 130mm. That would be a great bike for most people!

@OmnieStar Год назад

question. What water bottle is the best fit for stock bike? cause I can't find one that fits and Iv already spent to much T_T. Or is there a way to screw it on the bottom? Is there like a secret mount I don't know about? lol

@michaelsalameh4031 9 месяцев назад

@@OmnieStaranything is possible with a drill

@gloopot841 Год назад

this is such a good video, you always do such a good job installing these parts.

@jackgoodare3123 Год назад

love it you have come a long way and you are my favourite youtuber there is now

@EvansMTBSaga Год назад

Cheers Jack!

@jasoncarli2617 Год назад

Awesomeness 😁 that video was so good I just got a polygon siskiu d6 from bikes online and Im waiting to get it this just makes me want it more.

@blake_n_mtb Год назад

hey dude I first started watching you about a year ago and I was kinda iffy about your content, but I love your stuff now 🤙 cheers!

@rickkeller105 Год назад

Several of my friends and I run various Polygon bikes one has a T8, two have T7s and one has the D7. All are great for what you spend but out of the frame choices I really prefer the T series for the relaxed feel and lower seat tube

@rockster1385jh Год назад

Can’t wait to get my hands on a S-d7 before they come out with another year model and color scheme…this year’s color scheme has been the best so far

@larryisaak6431 Год назад

Always so excited when you post new content.

@totalchaos80 Год назад

One of your videos was recommended to me a few weeks ago while I was sitting around sick with Covid. I've watched a handful since. I've never seen someone switch around parts so much, it kinda makes me laugh. However I'm impressed with your mechanic skills. I fall short when it comes to wheel building. I've replaced broken spokes, but I dont have the patience to build a whole wheel from the hub up.

@EvansMTBSaga Год назад

I'm swapping parts to keep the videos coming, that's just what I do here 😁 thanks for watching. Wheel building is a blast. It's just a pattern you follow, I definitely recommend trying it

@sonofawil Год назад

I don’t know. I think every one of those geo measurements are different enough to feel when riding. If I move reach or stack by 5 mm, I can feel it. When you combine incremental changes on a bunch of measurements it’s bound to feel different.

@Slvrx7 Год назад

Thanks for the shoutout! Id suggest you try out a ripmo, climbs better than the d7 and descends way better. Ripmo AF's are on sale right now too. If thats too much travel try the ripley

@isaachello118 Год назад

Dude ur vids are so entertaining and useful keep up the good work 👍

@enriquehernandez155 Год назад

Polygon siskiu is a very well built frame. You said it before this Polygon fits you perfectly and it has the fastest time of your bikes.

@EvansMTBSaga Год назад

Thanks dude! Polygon is awesome. I hope to try a long travel bike of theirs soon

@TheCrookedWheel Год назад

Three numbres on the Polygon that make it a more stable bike... Reach, BB Height, and Wheelbase. Those relative numbers on the Polygon all correspond to a much more stable ride at speed when compared to the Yeti. Additionally, your local trails/riding style probably fits well with a 66.5deg HTA. The stack height may be a non-factor depending on what you run for spacers, but a taller stack will create a more upright ride, shorter stack makes the bike more accepting to steering input. Lastly, frame weight doesn't matter. Wheels and tires are the most important components, followed by geo, then suspension quality.

@miyamotosan972 Год назад

To shorten the seat tube you must cut the Frame down. It isn't ideal but it works.

@ODDY-NUFF-CALYPSO 9 месяцев назад

So nice of ur twin to help u put on ur front wheel while u did rear wheel

@bradleysikes9771 Год назад

Hi I really love this channel I’ve been watching for a few weeks now and I really like this channel and watching you please keep making videos

@bradleysikes9771 Год назад

OH HE LIKED MY COMMENT OMG

@henry06x Год назад

if you go too high bike will feel off. I have a 19 trek fuel i have down stroked to make a short travel version more downcountry now. Lifted the front end by 20mm with a crown race spacer to try to slaken the bike because the older frames a little steep. even with the bike in the low setting it just felt off. wrecked twice in two rides and damn near had a bad one sliding off a fast flow trail. Handling just wasn't there anymore with the bb being higher and raising the center of gravity. At 10mm it feels great though.

@varun-xy1fm Год назад

Hey man! Thanks to you, I actually chipped a tooth of my cassette (not joking). Still love you, keep making the great content!

@user-ym6tg1ve7g Год назад

we were missing this bike!

@EvansMTBSaga Год назад

Me too!

@shortbursst Год назад

finally we get to see this bike i missed it

@km006 Год назад

D7 looking sick! Rip cassette tooth though

@louiefriesen Год назад

I think a longer travel bike would be good for you. More travel doesn't mean it climbs worse. I rented a Santa Cruz 5010 (140/130mm f/r) in Sedona and my brother rented a Trek Remedy 8 (160/150mm f/r), and the Remedy climbed way better, and also descended way better. My brother liked it so much he bought his own Remedy. Plus another advantage is that it's big enough for Whistler. I can't use my 120mm downcountry bike at whistler, and it wouldn't make much sense for me to use my 180/170mm f/r eBike there either, I'd have to rent a DH bike. I think it would be good for you to check out the Trek Fuel bikes (140/130mm f/r), since you like 29ers. Or even a Slash (170/170mm), I've heard great things about them.

@kevinhodgins9071 Год назад

Always enjoy your vids! Congrats on exciting move. Crazy how far the channel has grown. I’ve enjoyed the journey from the Axum days. Feeling some Bentonville bike changes are a foot? Or are you yeti to make to make a decision? 😉

@EvansMTBSaga Год назад

Haha nice play on words 😂 I tried selling the yeti, no one wanted it, so I'm "stuck" with it. Poor me right? 😂

@cy_dejesus Год назад

I have the same bike, upgraded it as well. Fork travel increased to 160mm. Same issue, seat tube is to high for me I have to upgrade my seat post to a lower stack height (fox transfer). Overall I still love my bike...

@abstraddic0442 Год назад

🚲 You're going to move frome that area with all those sweet trails at you finger tips. Don't do it ! Arizona right ? Curious, is Phoenix any cooler ? I would love to live in Phoenix, AZ. Great video. Keep it up ! 👍

@jaybainum9513 Год назад

badass sythwave tune at 3:58. Wish you could share ur soundtrack information😎😎 also ur overall vid editing is spot on👍

@carolinekarleen9304 Год назад

You should try upgrading a Trek remedy 7! That is my personal bike, and I love it. I just put a new 160 mm fork on it, (it was 140)

@keosoutdooradventures Год назад

I had similar result with my Marley and other hardtails that cost me 4 times as much. the Marley is the only one still around

@TheBrokenMountainBiker Год назад

I said before how that Yeti seemed to be a lot of faff and still not right. I bought a £2800 bike last year (a Kellys Swag 50) and literally haven't had to change a thing so far. Those Polygons look awesome for the money, I was going to buy the D9 but it was out of stock everywhere in the UK so went with the Kellys from my local shop.

@braulioarjona7776 Год назад

damn dude what an amazing garage and tools you got buddy

@gaspertolar7950 Год назад

One tip, always grease the threads when installing pedals!

@cadegamer2854 Год назад

That is quite the seat tube !!🤣

@mtbboy1993 Год назад

The seat tube issue is common, but several brands learned the lesson, many still haven't. But I have Geometron G1, I love it great enduro bike, but can set it up as a dh bike too, even run mullet setup, or 27.5 or 29er, I have it in stock 29er setup and love it.

@EvansMTBSaga Год назад

I was googling something the other day, maybe lights or mud guards, and I came across your site! You do pretty good reviews!

@mtbboy1993 Год назад

@@EvansMTBSagaThank you. Those mudguards get a lot of attention. May hate the looks. I don't care.

@tristangarcia7735 Год назад

Just a question. Does anyone know why some hydraulic disc brakes have those little tunnel-like vents on the Levers and other don’t. And what are they?

@MrSupermugen Год назад

I do think you'd suit a 150/160 bike. Bikes like the stumpy EVO. Frames are very light and can be setup steep or slack as.

@cualquierwearara Год назад

the rear pivot of the frame, next to axle, has bearings or just plastic bushings? did you check for any play in frame pivot points?

@charliemchugh8582 Год назад

Evan u can cut the seat tube down to lower the stand over hight

@sneakersfordays155 Год назад

Beautiful absolutely beautiful!

@danielvelasquez7708 Год назад

I never ridden carbon wheels ever, own two bike's one I plan on selling (Gt Aggressor's Pro) no buyers in over nine months, had to slowly upgrade the bike the most recent upgrade was getting a matching tubeless wheels, and even asked Berm Peak for advice heard nothing from them. Have encountered buyers who either non-responsive or no-shows in Orange County CA for $700 until 9/5, and it's disrespectful of them wasting my time trying to make a living while they think it's funny. Definitely am liking this video

@EvansMTBSaga Год назад

Yeah I hate when they flake out. I sold a lot of stuff for the move and so many people flake

@danielvelasquez7708 Год назад

@@EvansMTBSaga Yeah it is what it is, now I have to deal with the Marin San Quentin 2 making grinding noise on the rear which is a Shimano Mt-400-b, inspected it pitting on the cones not on the cups which was a relief for me, and need to replace them with new ones.

@Zach_May Год назад

Man ive been watching since the schwinn axum, youve come far!

@AlvarezAzel Год назад

I watched your review of the D7 while I was considering purchasing it. I eventually settled on the D7se which is basicly the same bike but with a boost Suntour raidon front fork (maybe an upgrade over the recon?) I'm also the same height as you being 175cm and I went for the medium frame, glad I did as seeing you struggle with the seat height and also not being able to use it fully extended would really stress me out. Thankfully on the medium the seat at it's max height is a perfect fit and it wont over extend my knees. I have only done a few upgrades, I went tubeless and put 2.4" magic mary and 2.35" hans dampf Scwalbes in soft trail compound, Ergon GA3 grips (those stock entity ones were agony!) and a Mudhugger front evo mudguard. I love this bike it rides so well on the roads and trails I ride on. I honestly can't see myself needing another bike for many years, the D7 just ticks all the boxes for me. Now looking at getting my wife one as shes on a hardtail at the moment.

@EvansMTBSaga Год назад

Oh yeah I loved my D7. Really fun ride and can really ride anything and everything. Good to hear about the upgrades, you must be riding some loam! I'm working on getting a DSE again since I sold my D7 for my Bentonville move

@AlvarezAzel Год назад

@@EvansMTBSaga Thanks for the response :) I'm from the UK so knobby tyres are usually the way to go as most trails are very muddy for 8 months of the year. The D7se came fitted with Maxxis rekons which are more XC based but these quickly became clogged with mud on my usual trails and became very slick. The swap to some beefy grippy Scwalbes was a game changer for me. Would love to see you get hold of the D7se, I got it at such a bargain price too. the D7 at the time was £1.400, the D7se was on special for £909 and I had a coupon code for a further 15% off. honestly I don't think I could have brought a better bike for anywhere near that money.

@timmayne1755 Год назад

I think Evan should go to a lift access bike park sometime

@trailpimp6369 Год назад

Nice job dude

@Saiffai Год назад

Could you make a review on the Treck slash 8?

@phil_dubss8335 Год назад

I’m already subscribed, so don’t have to worry about chipping a tooth off my cassette, but I do have a chipped off tooth on my chainring 😂😂

@EvansMTBSaga Год назад

Haha dang! Does it ride okay? I'm debating on selling it with a chipped tooth

@phil_dubss8335 Год назад

@@EvansMTBSaga it rides ok thanks, can’t even notice it’s there.Unless a dangerous amount of teeth are chipped off then it really won’t have much of an affect on overall performance

@yasserdev4432 Год назад

broo your videos are awesome, I enjoy them especially that they're kind of a mix of donut media and seth bike hacks, it's like the perfect combination

@EvansMTBSaga Год назад

Thanks Yasser!

@mdgeist472 Год назад

The Yeti might be small for you. I'm 5'8" and ride a medium 2022 Giant Trance X 29. The geo is very close to the D7 except slacker. You didn't mention STA. D7 STA may be too slack to climb well.

@MTBAlex Год назад

6:35 yeah, that seat tube looks longer than the ones on the Siskiu T

@NeOn-kb2jw Год назад

Ayoo new video keeps up the good work.

@saularanda4931 Год назад

Hi the trails that your riding look so fun! I’m a local from Phoenix, what’s the location? I want to try new trails.

@hoopman05 Год назад

D7 is back hooraaay

@anthonyamato2606 Год назад

Based off of everything you’ve been saying, I just think you purchased the wrong Yeti. The SB130 would have been the better fitting bike for you when sticking with the Yeti. That’s what I went with specifically for the reasons you describe. Great middle of the road set up. I crush the single track where I live in FL, but Also have the availability to have a blast on more DH/enduro based areas without issue. I was also looking at the YT IZZO, GG Gnarvana, and Stumpy. But I love the Yeti.

@bikeislife8405 Год назад

Seems like you decided to move to Bentonville after all?? Stoked for you bro, your quality is top notch, keep at it 💪

@EvansMTBSaga Год назад

Thanks dude! Less than 30 days away

@blasterdarkness5649 Год назад

Wait does the D7 come with a thru axel in the front and rear? If the front doesn't have one, is there a way to put one in the front?

@edog7666 Год назад

Evan you should move to Boise id we have good jumps good trails and it gets kinda warm in the summer but there’s mountains nearby to ride at when it’s warm

@genisis53 Год назад

It looks like the D7 is longer and slacker from those specs you put up. You look like you might be a long guy, so that makes sense. And even with the overforking, the D7 BB height is lower than the Yeti

@richardtiznadoc Год назад

Mi vídeo favorito ❣️ ojalá deje mi D7 parecida a esa algún día 😊

@mikem7618 Год назад

Look into a Norco optic if you’re looking for a good pedaling all a rounder!

@phaeton7gaming Год назад

@Evans MTB Saga I wish I had a bike upgrade from you but my problem is im far far away from you cuz im from Philippines proudly represent all Filipino bikers out there.

@sjokkomann8126 Год назад

when you clean the chain do you use IPA beer?

@chrisjones7281 Год назад

Evan, you said the rear triangle would not fit on the D5. What was different? Did you use both the Swing arm and the center link?

@EvansMTBSaga Год назад

Everything about the rear triangles were different. Linkage, bolts, width, bearing size. It couldn't work

@michaelorlando3647 Год назад

Which trail is this? I live in the East Valley and it looks a lot like Hawes.

@Canyonsenda9065 Месяц назад

Awesome Evan just followed

@OmnieStar Год назад

Just got my D7 last month. Haven't really got to ride except around town. But I can't fit a water bottle on it. Like it just wont accept a water bottle without it touching the rear shock and seat tube thing. It doesn't even hit the bottle of the water bottle holder. Any chance you know the fix?

@EvansMTBSaga Год назад

Side load water bottle cage. And it's okay if it's touching the rear shock

@mmtot Год назад

The Trigger's broom of mountain bikes.

@atagibran6170 Год назад

Nice bro

@shelbylangston329 10 месяцев назад

I want to get this bike and make it a single speed jump bike!!

@eugene44569 Год назад

Which one are you keeping now?

@WOLFTICKVIDEOS Год назад

Hey! Hey now!! We still love our Walmart bikes🤣 You know it's hot in other states too.😉 At least you don't have the humidity there🥵

@EvansMTBSaga Год назад

Haha it at least cools down. On my Bentonville trip, it was already 80 degrees by 5pm, and supposedly it was the hottest day of the year. I think swamp ass will be more of a problem there 😂

@alexdyke7176 Год назад

Love that build but please add a carbon crank that hurts my eyes

@hardmtnbiker Год назад

The trails seem to be pretty flat, it would be nice to se that bike go through it’s travel on more technical trails.

@EvansMTBSaga Год назад

GoPro effect

@nickevans8413 Год назад

can you do a review on the trek roscoe 6? love the vids

@NothingToNoOneInParticular Год назад

I'd love to see a ton of upgrades on a Jetson Pro Bolt. Want to do mine? lol

@dirtyboxr Год назад

When we are both in Bentonville ill let you demo my Evil Offering. I have had a marin mount vision, ibis ripmo af, sb130, transition sentinel and evil offering. I cant see myself ever changing.

@EvansMTBSaga Год назад

Heck yeah dude sounds good! Message me on IG so we have each other's contact?

@dirtyboxr Год назад

@@EvansMTBSaga i followed you, dont use insta much but it said you have to follow me to be able to message you

@dmac2401 8 месяцев назад

Hey man, love your content. I’m looking at a D5 project right now and noticed you can buy the D6/7 chainstay by itself. You mentioned the rear triangle didnt fit but did you try just the chainstay swap (the are the same length according to geometry) If so what did you find the issue to be?

@EvansMTBSaga 8 месяцев назад

The chainstay swap wouldn't work because the D7 chainstay ends with a female and the D5 ends with a male, or vice versa. I even tried to source bearings to swap the whole linkage but they aren't made

@dmac2401 8 месяцев назад

@@EvansMTBSaga Thanks for the reply, I can definitely see that now! I’m assuming the top linkages are in different positions and that’s why the seat stay can’t be swapped?

@JaredRMorgan Год назад

Love the broken tooth shot. 😂😂😂

@EvansMTBSaga Год назад

On an XX1 cassette! Oof! 😣

@BlackFlag94 Год назад

Is it a 140mm fork on the Yeti? Looks like a 130 will get you even closer on geometry numbers to the upgrade Polygon!

@pc_source Год назад

You should move to flagstaff there’s a lot of good trails here

@EvansMTBSaga Год назад

Already bought a house in Bentonville!

@adamneulander Год назад

I'm gonna go to Mesa for a cross country (running) invitational soon, any advice on how not to die of heat stroke?

@EvansMTBSaga Год назад

Consume lots of salt when you're hydrating for the run

@spencerisverycool Год назад

Very swag!!

@ichor20 Год назад

What torque wrench do you use? Didn't see it in your tools list. Keep up the great work!

@EvansMTBSaga Год назад

amzn.to/3KzmMuv Here you go. It's pretty good, allows microadjust and comes with a bunch of sockets and a case.

@j.lukewhite5337 Год назад

Now that you’ve been to the mountaintop, I think you should buy a new stock Axum and see what your impressions are now.

@EvansMTBSaga Год назад

Haha I tried and my order got canceled

@mlgwolf7273 Год назад

What is the torque wrench you were using in the video?

@EvansMTBSaga Год назад

amzn.to/3KzmMuv Here you go. It's pretty good, allows microadjust and comes with a bunch of sockets and a case.

@humanresources3545 Год назад

I think the 1 x 11 Shimano 5100 drive train left on it should've gone to 7100.

@davethewaffler2336 Год назад

You should buy a giant trance there pretty good

@aidanchapman5271 Год назад

hey awesome vid. i have the same bike can u tell me what the tourque setting on the bolts are or where to find themn

@RadioReprised Год назад

They are right on the bolts!

@aidanchapman5271 Год назад

@@RadioReprised some of them dont have it on them

@rhythm618 Год назад

If I had to guess the yeti is probably about to go up for sale and he’s going to get a different frame better suited to his needs. Especially after the difficulty he had trying to get it setup.

@EvansMTBSaga Год назад

The funny thing is, I tried to sell it in June and no hits

@rhythm618 Год назад

@@EvansMTBSaga The market is in a weird shift right now. I can’t seem to sell anything unless I’m selling it for significantly less then it’s worth. Maybe try putting it on eBay? I think that’s what I’m about to start doing again the only downside is I guess eBay is going to be handing out 1099s to anyone that sells over $600 a year. Keep track of purchase receipts to use as a write off at the end of the year.

@dimimtb Год назад

@@rhythm618 Yup, I think the market is going soft after the Covid glut for bike companies and accessories. All the people who took up riding are going back to their normal routines and I imagine selling stuff at a loss. Good for buyers, bad for sellers.

@rhythm618 Год назад

@@dimimtb Yeah the prices are still floating high but I think they’re going to come down soon.

@bindingcurve Год назад

@@rhythm618 I can’t seem to sell anything unless I’m selling it for significantly less then it’s worth. Well that is what it is worth. People think thy can sell a almost new bike for a new bike price. If I'm going to spend that , I will buy new with full support and a possible return. Also, stuff goes on sale. You should expect to get SALE price for your stuff.