Fixing skid steer track with Trackbar tool 

An excellent tutorial. Just purchased a 325G and expect to have to do this myself at some point. I’m going to order this set of tools to have on standby. There is a learning curve, no matter what you do in life, and this helped flatten it a bit for me. If you need ideas for future videos, one on servicing - and maybe some on operation of the various attachments you have - would be nice. Thank you for your time in putting this video together.

Excellent production. Thanks for sharing your story!

I find they a much easier to put on if you have 6 people, an excavator, 2 winches, 3 hunting dogs, and a case of beer.

Easiest way get the grease out is to use a board, tree etc cut to length and use the implement to push on the log etc against the front sprocket wheel. Basically use the "curl" of the machine to push the tract wheel in thus forcing out the grease.

Take that “nut” ,which is actually a fitting, all the way out. Stand on track and force grease out. Once the front idler is all the way back, take your Texas tooth pick thing and slide the track back into place. See if you can send those pieces of 600$ rod stock back.

Lots of good information and practical tips put in there. It is appreciated. I prefer to have the whole process (good and bad) left in videos as well.

Great to see you supported a individual ideas, watching maybe some marketing chalk you could mark the track the amount it needs to move so you could view it from inside the cab when the mark is at a visual point ?

Works a whole lot better if you put those bars on the top front and use them to push on the front roller instead of the back.

Been there and done that. Great video. Just ordered and received my Trackbar tools. It will make life easier next time I throw a tack.

Sticks work too

Save yourself a lot of money. Get 3 pieces of solid to bar out an inch in a quarter in diameter and use. That does the same thing but a heck of a lot cheaper

Turn off the music, way too load, can't hear what you are talking about.

well done

That is why I use wheeled machines in woods track machines are great but over wheel tracks will do just fine in bad conditions

I couldn't watch this, as it was too painful.

2nd time will be way better !.. After you regrease.. Run it about 5 min.. Then giver er another few pumps

What diameter is the round stock?

Rest assured you will throw a track!

Is the does or what? So why the funeral music? Ah he ha ha hehee

Why someone has equipment and knows nothing about it is beyond me. Lose the sucky music. It's called a grease nipple and it needs fully removed

Just there fool born every day.

What a frightening suite, some people don't belong on Equipment period. One big joke .