Fixing Weak 3 Point Hitch and Changing Engine Oil Ford 1910 Tractor

Подписаться 3,3 тыс.

Просмотров 131 тыс.

50% 1

Fixing the weak and slow hydraulic 3 point hitch on my ford 1910 tractor. We did a fluid and filter service as well as replaced the hydraulic cylinder seal on the piston. Some of these repairs can apply to many other model tractors such as the ford 1710 and i believe the 2110 as well as others.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@Lucas-pv2wn 4 года назад

Awesome video. I think the next video should be replacing that seat.😂🤣 Jk

@averybryant 4 года назад

Hahaha I completely agree. Maybe sometime soon. Thanks for watching

@willevans1471 3 года назад

The nut on top of the main injection pump next to the 3 fuel lines requires 8fl oz of 10w 30 oil every 50 hours to lube the pump.

@devondickey9222 Год назад

Great video young man. Very meticulous of you which is a great thing. Keep it up and I wish you the best. God bless.

@No1cares85 4 года назад

Thanks for this video! i have the same issues with my 3 pt hitch. Mine is bouncy too. I have already changed the fluid and filter but still had an issue. I did not know about the seal on the piston!

@chrislett5093 Год назад

Good job! Your fluid is nasty due to water in your system. Replacing those seals surly will help keep water out. In had algae in my hydraulic tank once, the fluid looked a lot like yours but chunky.

@MrBruce0777 3 месяца назад

Great video. In your case you did not have to bleed or prime the Hydraulic pump after draining all the hyd oil. Just crack open or remove the allen bolt on your hydraulic pump as you turn the motor over without letting the motor start. You'll see lots of air bubbles coming out. .

@bmink650 4 года назад

Good video, I just picked up an old 1900 model and have already learned so much about it from your videos. Keep it up!

@averybryant 4 года назад

Thank you!

@beunbad 3 года назад

How are these old Ford tractors? I have a chance to pick up a 1220.

@thomasphillips2356 3 года назад

Hey I have a Ford 1910 where did you get your pinston seal mines doing the same thing I know it’s gotta be shot like yours?

@averybryant 3 года назад

I ordered mine from messicks.com they have our fords listed under the new holland section

@paulsmyth6399 4 года назад

Where did you order the new seal for the piston and what is the part number? Great video.

@averybryant 4 года назад

Messicks.com I cant remember the part number at the moment but you can look up the one specific to your machine on that site

@notachance374 4 месяца назад

Did I miss the part where he checked the Flo to the pump? How does one go about that?

@nextgenfishing4403 Год назад

any chance i could message you or call you about some questions on my tractor? im lost

@cubmancan 4 года назад

Great Video on hydraulics repair! I have a Ford 3910 and did a video on maintenance on it. If you can, check it out and please subscribe. Thanks, CUBMANCAN

@ronneldeleon1903 Год назад

Hi hoping you see my comments, I having problem with my shibaura SP1540 . It can lift slow at the start and after the temperature rise it wont lift the implement. What shoul I do. I used SAE 10W for the hydraulic oil and filter is cleaned. any suggestions to this thanks

@ChesterinFrance 2 года назад

I am so satisfied to see it works again, great job bro, I will get a Ford 2000 soon, this is very useful, thanks man.

@anthonyr5869 Год назад

Did you do this on your 2110 ?

@curtisanderson977 Год назад

Thanks for the video it helps a lot. Can you tell if the hydraulic oil has to be Exactly on the mark To be able to run the 3 Point and the front motor. And I have a nineteen twenty Ford and I can't get the PTO to engage.

@apaulothegreat1581 Год назад

Great video just backwards on what's at hand. The whole system apart Inspection of all, clean all. Put together.

@farm_in_themiddleofthewood3339 4 года назад

Another good vid!!! One thing I noticed is that our 1910 has the other gear shift on the tree not both on the deck..... were there different versions of the diesel 1910? Great to see her working so well!!!!! Thanks!

@averybryant 4 года назад

There sure was! They had all kinds of options for these tractors back in the dah. Ive found a lot of the different options when looking for parts on messicks.com. Thanks for the support!

@robcarter7846 7 месяцев назад

i//s he available for adoption

@davidmabry4365 2 года назад

Just curious where you bought your dipstick for the transmission. I’ve seen a few different ones but I decided just to order the fill cap/plug. Had to chisel the old one out bc it seized up. But I’ve got the original shibaura sd2200 which is the same tractor basically.

@anthonyr5869 Год назад

That cylinder came with flat part down, but honestly it probably spins inside the cylinder overtime especially when you have a non functioning cracked seal

@shadowboy449 Год назад

12:00 does that sound like a rod knock?

@billybarthol4768 Год назад

Where can I order these parts? 17 10

@melvinparker3661 Год назад

You have no idea how much you have helped me. You gave me the information I been searching for. Im now a subscriber.

@frankiewalston1423 3 года назад

Looking for video of ford 1910 axle seal replacement

@earlnorred6908 2 года назад

Thank you for this video. I have a 1700 with no working hydraulic system. Thanks to you I have the new piston seal on and ready to assemble the top end .

@Insignificatos 2 месяца назад

Well done good job take care of the old girl and she will look after you for many years

@mikeprice1816 7 месяцев назад

U the goat

@reedhryals7007 2 года назад

Have a 1320 I'll try this it should be the same I think

@chadbarnard3443 2 года назад

Great video. Sure wish it was a Massey Ferguson so it would help me a little more lol

@moffattrentals7508 3 года назад

How did you get cylinder liner off of valve assembly?

@Tankster.7 Год назад

Thanks for a great video it is very helpful

@mrGears65 3 года назад

You need to put a new Seat

@averybryant 3 года назад

Nahh its fineeee

@Lucas-pv2wn 2 года назад

Just replaced that seal with the help of this video. Thank you! That seal was NOT easy to get on.

@09rja 2 года назад

Thanks. I am having problems with my 1700's lift. It is making a whining type sound when I try to raise the lift arms. Do you think this could be the issue?

@averybryant 2 года назад

It very well could be, never know for sure until you start checking things out for sure though. Plus a basic service definitely cant hurt

@grayshadowhandpan4277 4 года назад

Thanks for the great video! There isn't anywhere else on forums or videos that I could find that shows the same problem! Thank you :)

@kerrysupporter 11 месяцев назад

That was a good repair gob. It lifted well after

@flpanhandler7749 4 года назад

You replacing that stabilization chain with a bar or leaving it as chain. Maybe a quick video on that.

@rearl1869 3 года назад

you all might be aware the owners manual on the 2110 says to put oil in the injector pump when you change the engine oil.dont know why unless the injector pump gets oil from the engine? the 1910 and 2110 are very similar machines. there is a plug in top of the pump you put the oil in . but it doesnt say how much.

@averybryant 3 года назад

That is true, only some models capped for it, the 1910 did not but if you manual says to do it then you should. They do get their oil from the engine.

@Calidog_Tex Год назад

Awesome 👍

@thelastjohnwayne 4 года назад

Dude that seat.....

@averybryant 4 года назад

Got to make do sometimes hahaha. Ill change it soon

@Ranchready496 Год назад

👏🍻👍

@Rick-nk7pm 2 года назад

Boo that's zoow....nowsey

@savoielvis1 Год назад

Amazing job :O !!!

@kennyshrey6970 3 года назад

Might want to replace that seat

@krloseque 4 года назад

I have the same issue. Can you tell me where to find the seal and other parts. I just bought a 1710. Thank you.

@averybryant 4 года назад

I bought mine off ebay but it was the only one on there. Messicks.com has everything you will need including parts diagrams. Thanks for watching

@stevestutts3924 11 месяцев назад

Great video

@sst45563 4 года назад

Great how-to, thanks for showing all the part numbers..

@zee_nyc 4 месяца назад

Well done.

@ericsimpson4732 2 года назад

U need to order a new seat

@calvinkalmon6746 2 года назад

Good info!

@jessemccollum4866 4 года назад

Thank you very much for the video!!!

@samgunderson6465 3 года назад

Do not use WD-40 on any seal. WD-40 was designed as an industrial solvent to clean industrial machinery and parts, it will, if left on any type of rubber, plastic, or petroleum based seal and not completely cleaned off it will destroy your new seal and you’ll be right back at it again. Just a PSA.

@averybryant 3 года назад

Thanks for the tip. So far its held up fine, I suppose the hydraulic oil probably “washed” it off from the seal

@reedhryals7007 2 года назад

It's for water displacement that's what the wd stands for

@mattfleming86 Год назад

It's not as aggressive as some folks make it out to be.. but it is still not great to use general purpose. It degrades stuff, and in presence of oxygen it turns into sticky varnish. For hydraulics, use a dab of hydraulic oil. Mixing anything with hydraulic oils, even mixing different grades/specs CAN cause problems, especially in setups that have a transmission attached. I wouldnt want to put wd anywhere in my trans case for that reason. not worth losing a detergent package over.

@tianinc 3 года назад

Very helpful video. I liked and subscribed.

@averybryant 3 года назад

Thank you

@loydbyers3235 4 года назад

Great video, I have the same tractor and was wondering what type of hydraulic fluid you used? I buy most all my parts from the New Holland dealer, because they are local, but the Hydraulic fluid they recommend is almost $100.00 for 5 gallons! I was looking for a less expensive alternative, but still quality oil.

@averybryant 4 года назад

Thanks for watching! I used the Traveller Brand in the black bucket from Tractor supply. Its just called Universal Tractor Trans/Hydraulic Fluid. As far as other brands as long as it meets the ford 134 requirements you should be fine

@crpth1 3 года назад

@@JNHEscapes - For goodness sake! For "test" or troubleshooting purposes you could use olive oil, sun flower oil, engine oil and a vast etc. Keep that in mind and the credit card quiet in your wallet. LOL 😂

@floydarmand7086 3 года назад

@mikethecrock 3 года назад

Great vid

@averybryant 3 года назад

Thank you

@oliviarodriguezbryant_ 4 года назад

that's my bf

@averybryant 4 года назад

Same

@oliviarodriguezbryant_ 4 года назад

i know him

@averybryant 4 года назад

No wayyy

@edwardgarza9847 4 года назад

Great video. I just bought a Long 320. From the research if done so far is it's a Ford knockoff. My three point is not working as well. I found this videos and was wondering if anyone knows anything about the long tractors. I drained the fluid and it was milky which tells me it probably had water in it. The only filter I found was in the power steering reservoir. I would also like to know if there is a piston seal I need to check. Any help would be greatly appreciated.

@averybryant 4 года назад

See if you can find a parts diagram for the hydraulic system on your tractor. Some models have a screen at the start of the return tube that gets plugged up. Thanks for watching