Overclocking of registered RAM on the Huananzhi x79 zd3 motherboard can be done by BIOS with timings, flashing the chip with the CH341A programmer or using a bootable USB flash drive. The main snag is the compatibility of the BIOS with your motherboard, the correct operation of system devices depends on this. It is also important to set the optimal timings, which will provide both high read / write / copy / delay speeds, and maintain the stability of the system as a whole without a "blue screen". All the details in the video, and you can buy everything you need here:
✔ ECC DDR3 memory ali.ski/x3KDi_ or ali.ski/Rabk0
✔ Ch341a programmer ali.ski/Q8Xjx or ali.ski/wRqKBJ
✔ Motherboard 1. HUANANZHI X79 ali.ski/zgP80; 2. MACHINIST X79 ali.ski/S-RaU or ali.ski/FnI1I; 3. MACHINIST X99 ali.ski/gFcDhk; 4. HUANANZHI X99 ali.ski/_oCpSs; 5. HUANANZHI X99 DUAL CPU ali.ski/k1wRJN
download the necessary firmware and programs for HUANANZHI X79-ZD3 ver.1(v3.6C):
1.afudos xeon-e5450.ru/wp-content/plug...,
2. Rufus xeon-e5450.ru/wp-content/plug...,
3. BIOS for the programmer xeon-e5450.ru/wp-content/plug...,
4. BIOS via flash drive xeon-e5450.ru/no_plugin_downl...
#bios firmware with programmer #bios flash drive firmware #bios #programmerch341a #timings for DDR3REG #Huananzhi #overclocking #overclocking RAM #kupiche
#Home_Engineering #Домашний_Инженеринг #Vladimir_Maleronok
💲 [OFFER] If you have a VK page, Facebook, Instagram, TikTok, RU-vid channel or website, then earn in partnership with www.admitad.com/en/promo/?ref... #ADMITAD
4 авг 2022